Upper Dishrack with Wheels 99001454 | Official Whirlpool Part | Fast Shipping | PartSelect
Upper Dishrack with Wheels – Part Number: 99001454
Upper Dishrack with Wheels – Part Number: 99001454 Upper Dishrack with Wheels – Part Number: 99001454 https://partselectcom.azureedge.net/Schematics/Maytag/52755.gif

Upper Dishrack with Wheels

PartSelect Number PS2099053

Manufacturer Part Number 99001454

Manufactured by Whirlpool

Product Description

Upper Dishrack with Wheels Specifications

This rack comes complete with four attached wheels and the rack may differ in appearance, but will function same as original part.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Not cleaning dishes properly

This part works with the following products:

Dishwasher.

This part works with the following brands:

Maytag, Jenn-Air, Magic Chef, Amana, Crosley, Admiral, Norge.

Part # 99001454 replaces these:

751799, 903092, 903126, 903179, 903440, 903536, 903769, 903771, 903843, 903844, 903845, 903916, 903917, 903918, 903919, 903920, 9-3092, 9-3126, 9-3179, 9-3440... Show More
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Part Videos

Replacing your Maytag Dishwasher Upper Dishrack with Wheels

Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 44 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sharon from Kewadin, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10139223, 99001454
Dishwasher racks were all rusted and the coating was wore off.
Just took the racks out installed the new ones in no tool required.

I will go through partselect.com again. Had a very good esperience with them.
83 of 96 people found this instruction helpful.
Was this instruction helpful to you?
Thomas from Centennial, CO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP99001576, 99001429, 99001454, WP903093
Old shelf rack and silverware basket (yellowed & stained)
Removed the old dishrack shelf by taking off the end caps. A screw driver was used to release the plastic end caps. The old dishrack shelf is now able to just roll out and the new shelf is rolled in and the old end caps replaced. Quick and easy plus it makes the dish machine look new. The new silverware basket requires no tools just replace the old one.
70 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Loraine from Phoenix, AZ
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10139223, 99001454
Racks were rusted and the tines were breaking off
The bottom rack was easiest, just picked it up out of the dishwasher and moved the sprayer and the silverware holder from the old rack to the new rack and set it back in the dishwasher. The top rack was a little tricky, it took a minute to figure out to remove the little end-caps on the runners and then it just slid out. Slid the new one in, replaced the caps and moved the upper rack basket. It took less than 15 minutes to fix and now it's like a brand new dishwasher!
24 of 33 people found this instruction helpful.
Was this instruction helpful to you?
TODD from HASLET, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
99002571, 99001454
My old dishwasher racks were worn and rusty.
I simply ordered new rack assembly for the upper and lower rack units. Removed the old racks and slid in the new ones. I gotta say, Part Select saved me $50 for these racks compared to everywhere else I looked and called.

Thank you Part Select !!!
24 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Lora from Plover, WI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
WP99003318, 99001454
Racks were rusting, pieces braking off and rubber coating was peeling.
Was extremely easy to remove that existing rackings(upper and lower), install the new racks and snap in the new spray tower. It now looks like we have a new dishwasher. We are hoping that it will last another 10+ years.
We will recommend your site to friends.
21 of 54 people found this instruction helpful.
Was this instruction helpful to you?
russell from chesapeake, VA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
99002572, 99001454
racks rusted
removed old racks ,installed new ones
14 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Charles from Phoenix, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
W10139223, 99001454
Rusted upper and lower racks, broken tines
Read the experiences here, very helpful. Bottom slides out first - really easy. The new part comes with rollers, you don't need to remove the old ones. Now the only problem, getting the sprayer off the bottom basket. Look carefullty, you must use a screwdriver to release one side of the sprayer, then it works off easily. Make sure you note the orientation of the base of the sprayer. Reverse steps above and you are done. New tray slides in. Our new tray was a bit wider than the old one so we needed to use a bit of pressure to "shrink" the back just a wee bit.

The upper is easy also. Since the rails are uneven, make sure you put the high rollers on the high side no matter what your wife told about how it is supposed to go in. The end caps snap inward and slide out of the rails. Easy once you know. The uneven rails are obvious once you notice. Total time was 45 minuts, 30 of which was figuring out how to get the sprayer off without damage.

Would be nice to know the factory recommendation for removing the sprayer.
13 of 16 people found this instruction helpful.
Was this instruction helpful to you?
GREG from Castle Rock, CO
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
99001454, W10139223
Replaced Racks, Lower Rack Has Design Flaw
Replaced upper and lower racks. The new lower rack has a design flaw: it has 3 wheels on each side, but should have 4 wheels on each side. When you pull out the bottom rack, the last set of wheels drop down into the open space where the door hinges to the cabinet, causing the dishes to bounce and shake around. Then when you push rack in, you have to lift it back up onto the tracks made for the wheels to roll on. You can't pull the bottom rack out far enough to access the back of the rack very well.
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Stacey from Robbinsdale, MN
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Parts Used:
W10139223, 99001454
My racks were rusting, and a few tines had fallen off
First I did the top - getting the ends off the track is simple, flip the ends "open" like a book on each side, and remove the caps. Pull out the rack, replace with the new one and replace the caps. Bottom rack was easier once I figured out how to remove the spray tower. Grab it firmly and twist. Place it in the new rack, and roll it into the DW. I'm a fairly handy woman, and this was quite easy.
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Paul from Anaheim, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Parts Used:
W10139223, 99001454
Rusted racks
Most difficult was figuring out how to release the top rack...just flip the end pieces to the side and out they come. Next was removing and reinserting the spray head in the bottom rack...just twist and take out then align and twist into place in the new rack.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
12 Reviews
4.6
out of 5
Filter By Rating:
  • 5 Stars
    7
  • 4 Stars
    5
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Model Cross Reference

This part works with the following models:

PartSelect Number: PS2099053
Manufacturer Part Number: 99001454
Brand
Model Number
Description
Amana
ADW662EAB
Dishwasher
Amana
ADW662EAB-PADW662EAB0
Dishwasher - Amana Dishwasher Model ADW662EAB-PADW662EAB0 (ADW662EABPADW662EAB0, ADW662EAB PADW662EAB0) Parts
Amana
ADW662EAC
Dishwasher
Amana
ADW662EAC-PADW662EAC0
Dishwasher - Amana Dishwasher Model ADW662EAC-PADW662EAC0 (ADW662EACPADW662EAC0, ADW662EAC PADW662EAC0) Parts
Amana
ADW662EAS
Dishwasher
Amana
ADW662EAW
Dishwasher
Amana
ADW662EAW-PADW662EAW0
Dishwasher - Amana Dishwasher Model ADW662EAW-PADW662EAW0 (ADW662EAWPADW662EAW0, ADW662EAW PADW662EAW0) Parts
Amana
ADW862EAB
Dishwasher
Amana
ADW862EAC
Dishwasher
Amana
ADW862EAS
Dishwasher
Amana
ADW862EAW
Dishwasher
Magic Chef
CDB3100AWE
Dishwasher
Magic Chef
CDB3100AWT
Dishwasher
Magic Chef
CDB3100AWX
Dishwasher
Magic Chef
CDB6100AWE
Dishwasher
Magic Chef
CDB6100AWN
Dishwasher
Magic Chef
CDB6100AWX
Dishwasher
Crosley
CDC400B
Dishwasher
Crosley
CDC450B
Dishwasher
Crosley
CDC5J
Dishwasher
Crosley
CDC610B
Dishwasher
Crosley
CDU20J
Dishwasher
Crosley
CDU250B
Dishwasher
Crosley
CDU250V
Dishwasher
Crosley
CDU2J
Dishwasher
Crosley
CDU2J3
Dishwasher
Crosley
CDU400B
Dishwasher - Undercounter
Crosley
CDU450B
Dishwasher
Crosley
CDU450V
Dishwasher
Crosley
CDU510B
Dishwasher