Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas C - May 12, 2018
Verified Purchase
Easy to replace
Part was easy to replace - only had 6 screws to remove/replace - took 5 minutes
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Carol
March 22, 2022
When I ordered this item I thought it showed a front cover on it. We didn’t receive a front cover, shouldn’t we have?
For model number 241561302
Hi Carol,
Thank you for your question. The front cover is sold separately. Before we can provide you with information on the front cover, we will need the model number from your refrigerator. We have included a link from our website that you may use to find the model number on it. If you could resubmit your question with this information, we would be happy to help you. We are open 7 days a week. We look forward to hearing from you!
THE ICE CRADLE (HOLDING THE ICE) IS CRACKED AT THE FRONT LEFT SIDE. THAT IS THE ONLY THING WE CAN FIND THAT IS NOT LETTING THE DOOR CLOSE PROPERLY????? CAN WE REPLACE THIS PART OR DO WE NEED THE WHOLE ICE MAKER??
For model number FGHS26631PF4A
Hello Sheila, thank you for the great question. The part that you are looking for is the front-ice container, part number PS2361241. This part is sold individually. You only need to replace this part to fix the issue. If you need help placing an order, customer service is open 7 days a week!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mark
September 10, 2017
I am getting very thin pieces of what appears to be clear plastic in my ice whenever it is set to crush. Is there a replacement ice tray w/auger, etc that i can buy as a whole unit ? Or do i have to buy each piece separately ? What pieces should i replace.
For model number PLHS69EGSS1
Hi Mark,
Thank you for your inquiry. You can actually buy the whole unit as one. Below is the link to the part that you would need. If you wanted to buy the parts separately, I would suggest searching your model number and looking at the diagram. Then choose the parts that you would need according to the diagram. I hope that helps. Good luck.
