Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
OTIS R - March 23, 2024
Verified Purchase
great
thks works gr8
★★★★★
★★★★★
Jackie B - July 6, 2021
Verified Purchase
Part works as expected and the repair was very easy.
I spent hours searching for a repair person and no one in our area touches GE products. I finally found someone 60+ miles away and they were not available for two weeks. I did a little internet search and found a video on how to repair my dryer. Thank you Parts Select for having available parts that our local guy said were hard to get.
★★★★★
★★★★★
Steve N - April 23, 2021
Verified Purchase
Works as advertised
The part works as advertised. Thanks for the troubleshooting guide. This was what I suspected it to be, but your recommendation made me feel better for purchasing this switch.
★★★★★
★★★★★
Phillip H Travers S - April 8, 2019
Verified Purchase
Exact replacement
Clean packaging,
★★★★★
★★★★★
Larry G - August 9, 2018
Verified Purchase
Worked fine!!
Part arrived in good condition.
★★★★★
★★★★★
David S - March 3, 2018
Verified Purchase
just what i needed
good service fit perfect
★★★★★
★★★★★
Anton K - February 12, 2018
Verified Purchase
Easy repair
The was a exact replacement
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer work but wouldn’t shut off when finished cycle, had to shutoff from breaker
With a thin flat screwdriver I was able to pry out the old door switch, I replaced it with the new door switch, pushed back in dryer and so far is working since I installed a month ago.
joaquin from MIAMI BEACH, FL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
3 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Wouldn't shut off
-Remove rear retaining bracket [ (3) screws f/ top lid and (2) screws f/ main chassis] -Remove top lid by sliding toward rear and lift off. -Remove front electronics display, (2) screws 1 on both sides. -Remove main harness plugs from main board -Remove main board (4) screws -The reverse to reinstall
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Thomas
May 11, 2024
just want to make sure that the switch I ordered accepts 3 prongs cause the one I want to replace has 3 prongs please answer for me thanx
For model number DLG5988S
Hi Thomas, thank you for the question. Based on our research, the safety switch assembly, part number PS16551445, is compatible with your model, and it accepts the 3 prongs. We hope this information helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Andrea
June 21, 2024
Dryer powers on fine, I select any dry cycle, I press the start button and all I hear are 2 clicks, processing indicator shows drying light blinking but nothing is happening. Drum isn't moving and nothing is drying yet the indicator continue to display, including estimated time remaining counting down. Help.
For model number DLEX5680V
Hi Andrea, thank you for reaching out. Based on the description that you have provided, we would recommend checking the drive belt to fix the issue. If this is not the issue, we would suggest replacing the control board, part number PS11710689, to solve the problem. We hope this helps!
