Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
George S - June 29, 2023
Verified Purchase
Circuit board replacement
Took a gamble on ordering this part since I wasn’t able to get a specific answer to my inquiry. The display wouldn’t light up regardless of what steps I took. The part came in a timely manner, easy to install and most importantly, took care of the problem. During this failure, the top burners still worked so I was confident that the circuit board was the problem. Thanks PS.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wendy
October 17, 2023
the burners and oven wont heat up but before that it kept beeping and flashing a FO 11ERR WOULD IT BE THE CONTROL PANEL
For model number #JGB660SPSS
Hello Wendy, thank you for your inquiry. The F11 error code is a shorted key error. The control board is sensing a stuck or shorted key on the touch membrane. First, simply press the cancel key to clear the code. The error may have been caused by just holding down a key too long by mistake. If this does not help, reset the electronics by killing power to it at the breaker/fuse panel on your home for one full minute, then restore power. If after that the problem persists, replace the overlay, part number PS16219501. Glad to be of assistance!
