Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
William S - August 18, 2022
Verified Purchase
Quick Fix For My Dryer
Thanks for the quick shipment, good price, and good part. The new part fitted perfectly. Got the dryer up and running in no time flat.
★★★★★
★★★★★
Julie B - February 13, 2022
Verified Purchase
Easy repair
I received the part quickly and it was easy to install.
★★★★★
★★★★★
JOHN G - October 16, 2018
Verified Purchase
Installation
Was a lot easier to install than I thought.
★★★★★
★★★★★
Sara M - August 30, 2018
Verified Purchase
part was perfect
brand new and arrived early! no problem installing it!
★★★★★
★★★★★
Karen J - July 26, 2018
Verified Purchase
It was a snap!
This was an easy repair. The underneath side of the plastic molded backsplash has prongs and slots that hold the starter switch, temperature selector, and cycle selector in place. One of the prongs for the starter switch had broken off so replacing the backsplash was the only solution. All you have to do is remove the outside knobs, then (with appliance unplugged from power source) unseat the controls by rotating them CCW, then re-
attach to new part. Lacking confidence and having a little difficulty removing the cycle selector knob (I feared breaking something if I used too much force) I decided to call for help. It did not take long to reach a knowledgeable tech guy. He asked for my model # and very quickly we were on the same page. After a short conversation I was able to complete the repair quickly and easily.
★★★★★
★★★★★
BILL P - June 26, 2018
Verified Purchase
Perfect!
The part was easy to find on site, in great shape when it arrived and a perfect fit. Dryer looks brand new.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Bad rotary switch and backsplash
Shut off the Electric at the breaker panel. With a Philips head screw driver took off the metal plate, and slide the backsplash out of its holders. Twisted the three switches, twisting to the left to remove them and replace the back splash, controller, timer switch and installed the new rotary switch with a right twist. There are three w
... Read moreires on the rotary switch, just follow the line of the old switch. Replaced the back metal panel, and turn on the breaker. Replacement takes about 30 minutes along with putting the dryer back in place.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Toni
January 1, 2018
The bracket that holds the start button has broken therefore the start button will not work.
For model number Dbxr463eg7ww
Hi Toni, Thank you for the question. The bracket that holds the switch is part of the Backsplash, PartSelect Number PS1482163. In order to fix the issue with the bracket the backsplash will need to be replaced. Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Stephanie
December 20, 2018
Does the backsplash include the little plastic white clips to hiold the switch in place? Or can i just order the plastic clips because i dont need the whole backsplash but i dont see the clips to order only?
For model number Dbxr463gg8ww
Hi Stephanie,
Thank you for your question. Yes, the clips are included. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
September 24, 2019
The start switch keeps coming loose the mechanism inside fall off and the knob comes off. I’ve taken the back off and reinserted it but it stays for a few days but gets loose and falls off. What do i need
For model number DBXR463EG7WW
Hello Jim,
Thank you for your question. If the start switch itself is not able to stay attached because of a broken piece off of the switch, you would need to replace the switch under part WE4M519 for your model. Hope this helps!
Do i need the D-shaped knob insert clip. Part number: Ps267091. The knob fits tight when i reinsert it. This is a follow up to my previous question today
For model number DBXR463EG7WW
Hi Jim, thank you for your question. Yes, that part actually mostly acts as a sort of barrier between the switch and the knob so that the inner plastic part of your knob does not wear down from the inside with the continued use of the knob. However in your particular case you do not need to worry about it too much. Both knobs actually already come with that D shaped insert in place. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Thomas
November 18, 2017
Damaged dryer backsplash shows part number 175d5558. Will your we19m1490 properly replace the damaged backsplash?
For model number DBXR463EG6WW
Hello Thomas,
Thanks for your question. The part number WE19M1490 is indeed the part number for the control panel, also known as the backsplash, and is compatible with both the 175d5558 number and your model.
I hope this helps.
3 people found this helpful.
Was this helpful?
Thank you for voting!
MARGARET
October 28, 2017
I need a bach console for my GE dryer model number dbxr463eg7ww and 2 part numbers appear for this item. We19m1491 and we19m1490, which is the correct item? They both look the same.Thnaks.
For model number DBXR463EG7WW
Hi Margaret,
Thank you for your inquiry. Based on the model number you provided the part number for the correct backsplash for your appliance is WE19M1490. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.