This guide rail bracket assembly, also known as the dishrack support roller, is made for your dishwasher. It connects to the tub, and allows the dishrack guide rail to move in and out. If the wheels on the bracket assembly become worn or damaged, the guide rail may not be able to slide in and out, and your dishrack will not roll out smoothly. In this case, you will need to replace the assembly.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
General Electric, Hotpoint, Camco, Kenmore.
Part# WD12X23637 replaces these:
AP6890945
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dana
November 10, 2023
I just purchased the Upper Rack Rail Guides #WD12X23637 and want to how to install them?
For model number GLDA690P01BB
Hello Dana, thank you for reaching out. We have found the installation instructions for the support rail. These instructions may not be of the exact model but will help you. First, you may need to unplug the appliance and remove the upper dish rack and both the rails from the inner left and right side of the unit. Then remove the tub insulation. Un-thread the screws from the outer left and right side of the unit, that are holding the support rails. Pull out the support rails and follow back the same steps to install new support rails. We hope this information is useful!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
