Frigidaire/Frigidaire_Thumb/L63Y7SLE.gif
See part F37 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Oven Temperature Sensor

★★★★★
★★★★★
16 Reviews
$ 27.89   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS12724046
Manufacturer Part Number 316217008
Manufactured by Frigidaire
Product Description

Oven Temperature Sensor Specifications

Note: Connector could be different than original. If so cut & splice wires together with porcelain wire nuts.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Will Not Start | Element will not heat | Oven is too hot
This part works with the following products:
Range, Wall Oven.
This part works with the following products:
Frigidaire, Kenmore, Tappan, Crosley.
Part# 316217008 replaces these:
316233900, 316233902, 316233903
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

8 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Janice
    January 29, 2020
    Oven will not heat at all. Bake nor broil element will heat/work. I've set a temp and waited for over an hour and nothing. Not sure what it could be.
    For model number FFEF3011LBD
    Hello Janice, Thank you for the question. We suggest testing the Oven Temperature Sensor first. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. If the Sensor is good, you may have a defective Electronic Clock Timer, PartSelect Number PS1528267. We hope this helps.

    9 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Related Parts:
    Charles
    February 9, 2020
    Tested the oven temperature sensor and it is at 1094. Would this indicate that it needs replaced if the oven & broiler doesn't heat up?
    For model number FEF366CQE
    thank you for your question. There are a few parts that could cause this issue in your appliance. Your sensor is testing in working order. The temperature sensor should be reading between 1000 - 1100 ohms. I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. If those three parts are fine however, then the issue may be in your control board. Good luck with your repair.

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Kevin
    September 23, 2019
    Oven will not turn on. I can set the temperature, but nothing happens.
    For model number 316232662
    Hi Kevin, Thank you for your question. If the oven is not turning on, there are some parts that you will need to check to see which one is causing the issue. You will need to check the oven elements, the oven sensor, the electronic control board an the wiring between them. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!

    5 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Clete
    November 13, 2019
    Oven will light when turned on but Flame will not get large enough to heat oven. Flame is on all the way around burner but not very high.
    For model number FGF337GCB
    Hello Clete, Thank you for the question. You will need to Re-adjust Oven Air Shutter until you have the proper flame height and color. Hope this helps!

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Carol
    February 7, 2020
    Does this sensor work for elec. Or gas??
    For model number ffgf3005mwa
    Hi Carol. This works for gas models and is compatible with model ffgf3005mwa. Thank you for your question and good luck with your repair.

    2 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Sam
    February 6, 2020
    How to replace resistance temperature detector
    For model number CFEF312GSA
    Hello Sam, Thank you for the question. You will need to pull the appliance out and remove the back panel. This will expose the probe. You can unplug and remove the probe and replace with the new probe. Make sure to turn power off to the appliance. We hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Dennis
    December 4, 2019
    Oven will not heat up to 450. Will go up to 150-300 but very slow
    For model number 790.71319706
    Hello Dennis, Thank you for the question. I suggest testing the Oven Temperature Sensor, PartSelect Number PS12724046. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    William
    January 7, 2020
    My oven will turn on and will heat to the set temperature. However, after about 2-3 min at that temperature it will click off and will not reheat. I think there is an issue with the heat sensor and it is shutting off because it thinks the temperature is rising too high. Anyone else have this issue? Is this a known problem with Frigidaire ovens? My model number is FFGF3015LBD and the oven is about 8 years old.
    For model number FFGF3015LBD
    Hi William, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multi-meter. When testing the sensor with a multi-meter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. We hope this helps. Thank you and have a great day!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Part Videos

      Replacing your Frigidaire Range Oven Temperature Sensor

      Customer Repair Stories
       Average Repair Rating: 4.0 / 5.0, 4 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Range would not come on
        Turned off power, took back off stove removed old probe.
        I had to splice wires since new probe ends did not match up.
        the instructions were to splice the wires. I had the breaker off for about 3 hours. this is not in the instructions, but being a widow, I had to ask a few people why it would not come on after I connected the wires.
        After waiting, I turned the breaker on and my range came back on.
        • MaryLou from Monroe, NC
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Pliers, Screw drivers
        • Parts Used:
          316217008
        102 of 183 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Error message on display ff30
        Slid oven out removed one screw one plug replaced part took 5 minutes.told parts repair the error message and they sent me the correct part in two days will use them again saved me from Repair man wanted 85 dollars just to look at it my cost was 28 for probe and 8 dollars for shipping already helped neighbor with their stove they needed new ignighter 12 dollars repair place want 110 to come look at it this site walks you through repair best service!!!!
        • Roger from CHICAGO, IL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Pliers
        • Parts Used:
          316217008
        5 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Oven wasn't heating properly for a few months and then stopped altogether
        The hardest part was pulling the oven away from the wall. Two bolts hold the sensor in place and a clip connects the electronics. Replacing the old one was trivial.
        • Matt from KENNETT SQ, PA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Socket set
        • Parts Used:
          316217008
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Never received parts from PartSelect!!!
        It went easy, I ordered the part from another vendor, received it in 3 days and it only took about 20 minutes to install.
        I do not recommend ordering from PartSelect!
        • Ralph from SULLIGENT, AL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
        • Parts Used:
          316217008
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          16 Reviews
          4.3
          Filter By Rating:
          • 5 Stars
            11
          • 4 Stars
            3
          • 3 Stars
            0
          • 2 Stars
            0
          • 1 Star
            2
          Sort by:
          Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS12724046
          Manufacturer Part Number: 316217008
          Brand
          Model Number
          Description
          Kenmore
          79015021400
          Range
          Kenmore
          79015021401
          Range
          Kenmore
          79015031400
          Range
          Kenmore
          79015031401
          Range
          Kenmore
          79061750100
          Range
          Kenmore
          79061750102
          Range
          Kenmore
          79061750103
          Range
          Kenmore
          79061750104
          Range
          Kenmore
          79061750105
          Range
          Kenmore
          79061750106
          Range
          Kenmore
          79061751100
          Range
          Kenmore
          79061751102
          Range
          Kenmore
          79061751103
          Range
          Kenmore
          79061751104
          Range
          Kenmore
          79061751105
          Range
          Kenmore
          79061751106
          Range
          Kenmore
          79061752100
          Range
          Kenmore
          79061752102
          Range
          Kenmore
          79061752103
          Range
          Kenmore
          79061752104
          Range
          Kenmore
          79061752105
          Range
          Kenmore
          79061752106
          Range
          Kenmore
          79061754100
          Range
          Kenmore
          79061754102
          Range
          Kenmore
          79061754103
          Range
          Kenmore
          79061754104
          Range
          Kenmore
          79061754105
          Range
          Kenmore
          79061754106
          Range
          Kenmore
          79061759300
          Range
          Kenmore
          79061759301
          Range

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service