This gear case is for washers.
The Gear case drives the agitator and spins the basket in the washer.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer Dryer Combo, Washer.
This part works with the following products:
Whirlpool, Maytag.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Veronica
June 5, 2019
The washer agitator isn't spinning back and forth, nothing is broken inside that i can see, what what do i have to replace? How do i repair it?
Hello Veronica, thank you for inquiring. For this symptom you will want to consider either the Agitator, Agitator Directional Cogs, or the Direct Drive Motor Coupling, but we will need the washer's model number to locate the correct replacement parts.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Peter Bonura
January 18, 2019
My washing machine is about 4 years old. It started making. Noise when it goes in too spin cycle the. Noise sounds like. Gear noise pretty. Loud i notice that when i put it in to spin cycle that the elect motor is not spinning at the same time can u help me trouble shoot this problem. Trying to pin point the problem
Thank
For model number WTW48006XQ4
Hello Peter, thank you for your question. The first part I would recommend checking is the PartSelect Number: PS10057144 Washer Drive Pulley and clutch. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the splines on the clutch assembly are stripped and the washer is making noise, or if you are having problems with the wash and spin cycles. You will need to access the bottom of the washer for this repair. It is easiest to if you disconnect your washer from both the water and power source, and lay it on its back. The clutch assembly contains 6 parts, and all are included with the kit. It is also important to change out the entire assembly, rather than individual pieces. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Lanette
March 13, 2020
My washer works fine just makes tremendous noise when it spins...it used to b so quiet! what could b the problem??
For model number WTW4800XQ0
Good Day Lanette. Thank you for your question in regards to your unit (Model Number WTW4800XQ0). Based on our research, you may need to replace one or more of the following parts in order to solve the issue that you are having: 1) Agitator Directional Cogs (PartSelect Number PS388034). 2) Washer Drive Pulley (PartSelect Number PS10057144). 3) Agitator Cam Kit (PartSelect Number PS334648). 4) Drive Block - 2 5/16 Inch High (PartSelect Number PS11741977). 5) Drive Belt (PartSelect Number PS11747978). You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Hi John, I would try using the agitator repair kit PS334650 to see if that fixes your issue. The manual sadly wasn't much help with this but the agitator is the likely problem. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
