Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Alan G - June 17, 2021
Verified Purchase
repair refrigerater light
the part worked great
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Interior light would not come on when right hand door was open
Remove the screws from the two door pivot covers. Remove the covers and set aside. Remove the screws from the control board; disconnect the electrical connections; remove the door light switch, install door light switch then reinstall everything.
brian from CLOQUET, MN
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Timothy
October 23, 2019
Why does my new door switch come with 3 prongs instead of 2
For model number GNE29GSHDSS
Hi Timothy, thank you for your question. This part has been redesigned by the manufacturer but should install the same way. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Angie
October 1, 2021
Alarm sounds as if door is not closed, but they are closed and interior lights will not come on, unless I unplug and reset the fridge. We were also experiencing issue with the temperature fluctuation. Replaced the mother board and that seems to have resolved.
For model number GNE27JSMAFSS
Hello Angie, Thank you for the question. If the New Mother Board has fixed the temperature issue but the Door Ajar Alarm is still active, we suggest testing the Temperature Sensor. The Sensor could be detecting a higher then normal temp and the appliance thinks the door is open. With the sensor warmed up to room temperature the sensor should read approximately 6.2K Ohms at 68°F. With the thermistor submerged is a glass full of ice water, the sensor should be very close to 32°F which should read approximately 16.3K Ohms. We hope this helps!
