Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
John M - April 24, 2023
Verified Purchase
Great repair
Good dryer grille, fit well, easy installation
★★★★★
★★★★★
Andrew S - September 15, 2022
Verified Purchase
Easy to find/order/replace
Apart was easy to identify an order online… It was also easy to install and got here in a timely fashion.
★★★★★
★★★★★
Larry M - October 25, 2021
Verified Purchase
Part was a good match for original.
Part fastened into place and our nineteen year old drier is back in service.
★★★★★
★★★★★
Dennis S - May 10, 2021
Verified Purchase
Dryer lint filter cover
Part installed easy...
★★★★★
★★★★★
Carol M - September 10, 2020
Verified Purchase
Easy Repair
The delivery was fast and the part fit nicely.
Thank you!
★★★★★
★★★★★
Katie H - July 16, 2020
Verified Purchase
Easy repair
The part came quickly. I did have to try a variety of screws as the originals were rusted and I did not know to order screws separately
★★★★★
★★★★★
Marcela G - June 4, 2020
Verified Purchase
Great part
My appliance went back to work
★★★★★
★★★★★
Rachel R - January 21, 2020
Verified Purchase
Fit but took a little work...
The part was a perfect match, except the guide pins to fit it into the right spot were too large. I had to drill the guide holes in the dryer a touch bigger to have it snap in properly. Works like a charm now, though.
★★★★★
★★★★★
Cindy O - November 7, 2019
Verified Purchase
Dryer
It was the right part. I am very happy with it.
★★★★★
★★★★★
Melissa L - October 4, 2019
Verified Purchase
Easy repair.
Part came fast and was easy to install, but got broken within the week from clothes catching on the side of part while drying.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.9 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken grill
With the instructional video the repair was very easy.
Barbara from WIMAUMA, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cold air vent in dryer was broken
remove 3 screws vent comes out put new part in works grate just like new a gain
Initially, i watched the how to do it instruction in the fix website to determine the complexity of repairs. The instruction built up my confidence. I ordered and recieved the grill amd the two new sensors. I placed the two new sensors into the new grill sensor slots. Then removed the old grill by unscrewing three screws. Connected the two sensors positioned the grill and screwed in the three screws put the lent stray in the grill and closed the dyer door. I have been a happy camper ever since. I saved the $75 home insurance fee plus maintenence installment. Thanks
Ask our experts a question about this part and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
October 20, 2017
Re Whirlpool dryer ggw9250pwo, does the grill (8299979) come with sensors (3387223) or should i order separately? Also, i need the four attachment screws for the grill. Could you tell me the part number for the screws for ordering? Thank you. David
For model number 8299979 and 3387223
Hi David,
Thank you for your question. The grill and the sensors are sold separately. The part numbers for the screws are PS11742721 and PS11741409. I hope this helps. Thank you and have a great day!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Gerry
August 27, 2019
What screws go with part number PS12070617? There seems to be a lot of screws to choose from and I do not want to pay 6 or 8 bucks for one screw that is not the correct one. Thanks.
For model number 1DNET3205TQ0
Hi Gerry,
Thank you for your question. The part number listed under your model number for the cover screw is PS11740701. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Dave Leon
January 16, 2018
Dryer sheets and strings from sweat pants get sucked into the lower part of the outlet screen door grille. It has become a lot worse. The only thing i can think of is the plastic part may have warped? There is a gap between the outlet screen door grille and the metal housing.
For model number LTE6234DQ5
Hello Dave, Thank you for your inquiry. I would check this part and the lint screen door. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sabino
November 15, 2018
My dryer doesn’t start when i push the bottom . I checked sensors , doors switch, thermostat and they at ok but still not working, what else can i do to fix it
For model number 110.76002010
Hello Sabino, Thank you for the question. I suggest testing the Thermal Fuse, PartSelect Number PS11741460.This thermal fuse is used in dryers as a safety mechanism that stops the flow of electricity to the motor circuit when a dryer overheats. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
DEBBIE
September 25, 2019
I need the part numbers for the screws and sensors to go with the top cover for my lint filter for my dryer model mgdx600xw0. Thank you.
For model number mgdx600xw0
Hi Debbie, the moisture sensor is part PS11741408 , there are two screws WP487240 and PS11741409. which go through cover W11086603. Thank you for your question and good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gregory
January 15, 2020
Hello there, i have a question about air grille: Partselect number ps12070617,
Part number w11086603. Does it work for whirpool combo model # wet3300xq0
Thanks
For model number WET3300XQ0
Hello and thank you for writing.
Yes, it will. The Grille part number: PS12070617is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Sandra
October 7, 2022
I need the screws for this part! Can you help with this?
For model number W11086603 Dryer Lint Screen Air Grille for Whirlpool Genuine OEMW11086603 Dryer Lint Screen Air Gril
Hello Sandra, thank you for your question. The screw, part number PS11740701, will fit the grille. If you have any follow-up queries, please feel free to reach out to customer service. We are available seven days a week. Glad to be of help!
Hello can the sensors (wp3387223) be changed from the old lint cover to the new one?
For model number Ymedz400tq2
Hello Mike, thank you for your question. Yes, the sensors PS11741408 are sold separately from Lint Cover PS12070617. We have a video of the sensors to replace it on our site. We look forward to hearing from you.
I am ordering the lint cover lint screen. I need the screws/attachments to put it in too.
For model number WED8300SW0
Hello Sarah, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11742721 for the smaller screw and Part #: PS11741409 for the Longer Screw. We hope this is helpful!
Will outlet screen door grille fix error message F1-01 check lint screen
For model number 110.87572602
Hello Evelyn, thank you for reaching out. According to our research, if an error code F1 or F01 appears on the Kenmore dryer, the manufacturer recommends making sure the dryer vents are not blocked. The part number for the vent kit is PS3633049. This kit is used for the bottom and side exhaust. We hope this information helps!
