Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
David
May 30, 2022
The cutting head doesn't spin when the engine is running. Trying to figure out what I need to get to fix it as the motor works great!
For model number FL20 or fl25
Hi David and thank you for contacting us, you will need to chase the problem back towards the engine to see what's not connected anymore. It can be anything from the cutting head back to the clutch. Remove the cutting head and start working back. With the cutting head off, start the engine and see if the shaft turns. I am thinking any broken pieces will be visible as you take them apart. Check that the clutch spins when you rev the motor, if it does not or is slipping then you have a clutch problem and will need to replace it. I hope this helps and good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.