Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ruth W - October 26, 2018
Verified Purchase
Not complicated to repair, Electrician repaired in about 30 minutes.
Appliance now working as it should.
★★★★★
★★★★★
Joseph W - May 18, 2023
Verified Purchase
One hour repair
The part (range heating element) was very similar to the original from our range with only one plug in location slightly different. That created no problem when connecting all wiring. The entire project took less than one hour actual work time to remove and reinstall the new element. So far, so good, with range working just fine.
★★★★★
★★★★★
Richard T - June 19, 2019
Verified Purchase
Part worked as expected
The part arrived in good condition and was easy to install, just remove wires from the burner remove the old burner and replace the new burner and wires. it's that simple.
Thank you.
★★★★★
★★★★★
David D - October 24, 2018
Verified Purchase
easy fix
burner was not getting hot, ordered new one, installed easily and quickly, job done.
★★★★★
★★★★★
Judy R - February 3, 2018
Verified Purchase
Large burner replacement Repaired Stove
The part was almost perfect. The metal attachment on the new burner was changed a little, but I had saved the old burner so my handyman was able to use the bracket from the old one to install the new one.
★★★★★
★★★★★
Pat K - January 31, 2018
Verified Purchase
Element replacement
The part came really and installed easily. However I am not sure my problem is fixed.
★★★★★
★★★★★
Richard C - March 5, 2019
Verified Purchase
Perfect fit
The part fit perfect now i dont have to buy new stove will oder agine if i need parts
★★★★★
★★★★★
Michael K - March 18, 2021
Verified Purchase
Great Part
The excellently designed website made it easy to get the correct part.
★★★★★
★★★★★
Joseph E - March 19, 2021
Verified Purchase
Good
Element
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 6 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Burned out large range top element
After identifying the part and taking delivery of it, I opened the breaker for the unit and then removed the range top by taking out 2 Phillips screws and lifting the part away from the hinges in the back. The element was attached with only 2 spring loaded clips which I then removed, noting the numbered position of each. I then photogra
... Read morephed the wiring (x4) from several angles and removed each of them. I attached the clips to the new element and reconnected the wiring to the main heating element and the sensor per the photographs. The element was then re-positioned into its mounting slots, the range cover was reattached with the screws and the unit tested once power was restored.
Read less
Stan from STOW, OH
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
not instructions on how to install
the part conections were different from the original.so the first i did was to call parts direct to see if someone will help.NOBODY WAS ABLE TO HELP. so i had to use a lot of common sense to install this my self.
pedro from HARLINGEN, TX
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old coils burned in two pieces.
Had an electrician to do the job for me.
Turn off 220 voltage, unplug and remove clips. replace it with new part. Check part before replacing the top of range, if it works, the electricity can be turned back on. Repair done.
Ruth from WAXAHACHIE, TX
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner Element did not work
Shut off breaker. Remove a total of 3 screws attach wires, replace screws, turn breaker on. Done!
Paul from Reedsburg, WI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
6 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
stove/oven started popping like the 4th of July while on
Terminal block burned up along with 220 cord & front burner. With breaker off, disconnected the block & cord....and assembled new parts. Next, took 2 screws out of stove top and lifed stovetop up. Disconnected bracket holding burner-took off old burner & reattached new burner. Reattached bracket and put back screws..turn on breaker and
... Read more everything is like new. Do not recommend service companies to do these repairs. Excellent service with this company on receiving parts within 24 hours. Original manufacturers mark up their prices 30-40% more...Part Select is the way to go. Thank you for your execellent service.
Turned off power.Removed 2 screws, flipped top over, removed old element, replaced new element,turned over top,fasten down with 2 screws.Turned on power. Turned on burner,made coffee-took a brake.
Richard Finneman from Muskegon, MI
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
12 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
August 15, 2022
Need a photo of this part# w11047722
For model number Wfe510s0ab0
Hello Gary, thank you for your question. We have researched your part number and found a picture of it on one of our sister sites. We hope this helps.
intermittently, this burner continues heating when it should be thermostatically off, like staying on high when on low. thermostat built into this burner?
For model number wfe320moewo
Hi Michael,
Thank you for your question. If your burner is not turning off, you will need to check the burner, the switch and the wiring between the parts to see which one is causing the issue. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please call customer service. We look forward to hearing from you!
Which burner does this replace? I need to replace the bottom right one.
For model number YWEE730H0DS0
Hello Marcello, Thank you for the question. The PartSelect Number PS11775308 is the Front Right Element. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
February 1, 2023
Both front burners only run at high, no temperature control. Would this be in the heater element/thermostadt or the controlo?
For model number wfe510s0asw
Hi John, thank you for your question! The issue seems to be with the control switches and we would recommend replacing them. The dual element control switch is part number PS11754687, and the right front burner control switch is part number PS11740785. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
left frt surface element would not come on.Replaced left frt surface element. Burner comes on for a minute when switch is on high, then goes off. 30 seconds later comes back on. When you set temp gauge to 5 ( medium heat ) burner will not come on . What is the problem
For model number 665.9514330
Hello Walter, thank you for reaching out. We would recommend checking the left front surface element infinite switch, part number PS11740783, to fix the issue. Surface element control switch turns the surface element on and off and controls how much heat the element produces. Good luck with the repair!
What is the Right front burner part #? The issue is that the burner is on high heat by 1/2 way and is too hot for most cooking.
For model number WFE320MOESO
Hi Harold, thank you for your question! The right front surface element is part number PS11764906. But according to our research, the issue is due to the faulty right front infinite element, part number PS11740783. Glad to be of assistance!
