Quick Question!

Have you ever purchased from PartSelect.com before?

11770483-1-S-Frigidaire-5304506516-SPRAY ARM
11770483-1-S-Frigidaire-5304506516-SPRAY ARM 11770483-2-S-Frigidaire-5304506516-SPRAY ARM 11770483-3-S-Frigidaire-5304506516-SPRAY ARM https://partselectcom.azureedge.net/Schematics/Frigidaire/AU3P2D7I.gif

SPRAY ARM

Your Price

$18.41
Order within the next 11 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11770483
Manufacturer Part Number 5304506516
Manufactured by Frigidaire

This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwasher. No tools are required for this repair, simple remove the rack stops and upper dish rack, then disassemble the mount and spray arm before installing the new one.

This part works with the following brands: Frigidaire, Crosley, Kenmore, Kelvinator.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Not cleaning dishes properly.
  • Leaking.
  • Noisy.
  • Not drying dishes properly.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Hi, i can’t find part # 1544681. This is the upper arm spray part of my dishwasher. Where can i find this part so that i can replace it? Thank you, joy

Joy
Answer:

Hi Joy, Thank you for your question. If you are looking for the upper spray arm on your appliance, this would be the correct part. Good luck with your repair.

Related Parts: SPRAY ARM
1 person found this helpful.
Question:

Can I order just the replacement "nut" for the upper spray arm? That is the only part I need to replace.

Matt for model number FDB4315LFC0
Answer:

Hi Matt, Thank you for the question. Very sorry but the nut is only sold as part of the spray arm. Hope this helps!

1 person found this helpful.
Question:

Should my dishwasher completely drain when the wash cycle has finished? I notice about a 1/4 of an inch of standing water in the bottom of the tub after each washing cycle.

Matt for model number FDB4315LFC0
Answer:

Hi Matt, Thank you for the question. Yes, the appliance should drain completely. Sounds like the drain pump, PartSelect Number PS1765174 will need to be replaced. Hope this helps!

Related Parts: Drain Pump
1 person found this helpful.
Question:

My soap dispenser opens but the soap is still is encased in the plastic and has not gone through the cycle. What is causing this? Is it the upper or lower arm not distributing water to reach the soap? Thanks for your help

Cindy for model number BGHD2433KF1
Answer:

Hi Cindy, Thank you for your question. Well it could be your spray arm. I would suggest checking your water pressure. Sometimes if it is too low, the machine will not wash correctly and the water will not push the detergent out. Or you could check to see if there are any blockages over your spray arm holes or inside your spray arm. It sounds like your issue might be that the water is not coming out fast enough. If you are still having that problem after checking for blockages, I would suggest checking your detergent dispenser to see if it is working. If that is working then you may need to replace your spray arms. Good luck with your repair.

Most Recent

Question:

I have a question about the spray arm part #5304506516 on installing it. How tight should the nut be tightened? I removed mine to check it and it has a hole in the seam in the center. I tried to remember how tight it was on there. I don't want to over tighten it so I strip the threads. I notice when i get it to a certain point it stops, i think the threads bottom out in the nut. My question is this, is that the correct tightness? I can go a little tighter but i don't want to damage the threads on the delivery tube or the spray arm nut. Thanks, Kevin

Kevin for model number FGBD2435NB0A
Answer:

Hi Kevin, Thank you for the question. Watching the video it doesn't look like he tightened it to much after it came to a natural stop. Here is a link to the video. Hope this helps! https://www.youtube.com/watch?v=OWFBZZEFB3E

Question:

Bottom sprayer has the circle sprayer, the sprayer is not effective, was not cleaning. I took entire assembly out, including screen. Was a lot of funk down in there. I put assembly back together, dishes came out cleaner, but the assembly was in a pile, i missed something in putting assembly back together, help. Dishes were better but not completely clean, help!!

kay for model number FGHD2465NF1A
Answer:

Hi Kay, Thank you for your inquiry. There is a video on our website that you can reference on how to install the spray arm to see what you are missing. You will find the video under part number PS11770483. If the dishwasher is still not cleaning once you figure out what part is missing, There are some other parts that you will need to check to see which one is causing the issue. You will need to check the upper rack assembly, the the delivery tube gasket, the water inlet valve, the spray arm support, and the water delivery tube grommet. I hope this helps. Thank you and have a great day!

Question:

I can't find part 1544679 upper spray arm. What part can I use?

Delois Tucker for model number FFFBD2406NB7B
Answer:

Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11770483. Good luck with the repair!

Question:

Just received this part as a replacement for 154478202, but the diameter of the replacement is approx. 1/32" smaller than the original and will not fit the threaded nipple of the supply tube. Does the supply tube have to be replaced with the sprayer arm?

Joseph for model number FDBB4365FS0
Answer:

Hi Joseph, Thank you for your question. You should not need to replace any of your other parts for this part to fit. We have an installation video that might clear some things up with the installation process: https://youtu.be/OWFBZZEFB3E . I hope that helps. Good luck with your repair.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 80 reviews What's this?
 

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Joseph from Glen Rock, NJ

Top dishwasher spray arm fell off!

unscrewed the large nut from which the arm broke, and screwed in the new assembly!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Brian from DeForest, WI

My upper arm srayer kept falli9ng off

The new one fit right on, screwed it in, fixed!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: carlos from staten island, NY

The upper spay arm falls apart into 3 pieces during cleaning.

just screwed in the new one and all done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Carmen from Helotes, TX

Upper spram unit broke

Unscrewed old part, screwed new one on. 15 seconds. Works great!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: David from Saint Paul, MN

Upper spray arm kept falling off

Unscrewed the old part and screwed in the new one. All done by hand in 30 seconds. I feel like I saved a big service call bill.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kevin from South Burlington, VT

Upper sprayer was falling off during every wash

This site was very user friendly. The appliance diagrams made it very easy to identify and order the part needed. I would HIGHLY recommend this site to anyone that is looking to get a part for their appliance.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Kevin from Macon, GA

Spray unit kept coming off after a wash

unscrewed old, screwed on new...CAKE!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: JOY from SPRINGFIELD, TN

Upper arm kept coming off during cycle

Reached in and screwed the new arm with nut on very simple. . Works fine

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Paul from Westfield, MA

The upper spray head would fall off every time the dishwasher was run

Unscrewed the old one & screwed on the new took about 30 seconds

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Glen from North Miami, FL

Top spinner kept falling off

Went to the Frigidaire website and found no help. Found Part Select on google. Entered the Dishwasher Model, and zoomed in on the supplied chart. Ordered the broken part. Replaced the part by hand, no tools required. Thanks Parts Select.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ivan from Coral Springs, FL

The upper spray arm fell off

it took about 5 mins, this part is a complete repair if your upper (the small upper, not the big one bellow the top drawer but the small one above the top drawer) arm fell off.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: john from dade city, FL

Spray arm broke off

the part just snapped in and was so easy to order arrived right on time ,,,problem solved thanks partselect i will use you again next time the eleven year old breaks something..

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Andrew from Woodland Hills, CA

Upper spray unit was falling off!

The upper spray unit was falling off during every wash. Despite the description, the Arm Upper Spray Nut the part is everything that you need for this type of repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Deborah from Hatboro, PA

Arm originally got caught on a lid that was put in the top drawer. After that the arm kept popping off during the wash cycle.

Simply just had to screw the new arm on. Easy as putting the lid on a jar!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
  • SPRAY ARM
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Robert from Goreville, IL

Arm kept falling off.

All I did was unscrewed the nut by hand and screwed the new nut assembly on. That simple.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11770483
Manufacturer Part Number: 5304506516
Brand Model Number Description
Kenmore58714022200ADishwasher - DISHWASHER
Kenmore58714023200ADishwasher - DISHWASHER
Kenmore58714024200ADishwasher - DISHWASHER
Kenmore58714028200ADishwasher - DISHWASHER
Kenmore58714029200ADishwasher - DISHWASHER
Kenmore58715202800Dishwasher
Kenmore58715202801Dishwasher
Kenmore58715202802Dishwasher
Kenmore58715202803ADishwasher
Kenmore58715203800Dishwasher
Kenmore58715203801Dishwasher
Kenmore58715203802Dishwasher
Kenmore58715203803ADishwasher
Kenmore58715212900Dishwasher
Kenmore58715213900Dishwasher
Kenmore58715214900Dishwasher
Kenmore58715219900Dishwasher
Kenmore58715262900Dishwasher
Kenmore58715262900ADishwasher - DISHWASHER
Kenmore58715263900Dishwasher
Kenmore58715263900ADishwasher - DISHWASHER
Kenmore58715264900Dishwasher
Kenmore58715264900ADishwasher - DISHWASHER
Kenmore58715269900Dishwasher
Kenmore58715269900ADishwasher - DISHWASHER
Kenmore58715282900Dishwasher
Kenmore58715283900Dishwasher
Kenmore58715284900Dishwasher
Kenmore58715289900Dishwasher
Kenmore58715313000ADishwasher