Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
RONALD R - August 14, 2021
Verified Purchase
Right Part, Worked Correctly
Dishwasher sump gasket. Appears to have been opened previously, but worked.
★★★★★
★★★★★
David M - August 7, 2020
Verified Purchase
Worked like it should.
Fast shipping. Would order from parts select again.
★★★★★
★★★★★
Marvin D - July 16, 2020
Verified Purchase
painless
The part arrived quickly. By using the expanded parts picture the installation was painless. I honestly spent more time cleaning the gasket area than installing.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Justin
September 11, 2019
How do i install the sump pump gasket on this dishwasher? It it number 506 in the diagram. Water was spraying out everywhere on the bottom of my dishwasher so i bought this gasket from y'all because i believe it is the problem. Just wanted to know if you can give me any lead way into installing the gasket on my dishwasher? Thank you.
For model number GDF520PSJ2SS
Hi Justin,
1. Take out screws holding dishwasher to counter top.
2. Pull out lower dishrack and spray arm. Remove the filter basket by turning counter clockwise.
3. Remove fine filter. Take out the two screws to the sump housing. Remove both sump supports.
4. Remove outerdoor and the kick panel and then inner access panel, removing the plastic cover from inner access panel as well as the insulation.
5. Using wrench remove water line. Use nut driver remove drain hose from air gap, there may be water in the hose.
6. Remove the side panels and then the parts which hold the base to the cabinet. Tilt the dishwasher on its back.
7. Remove the pressure chamber to sump hose on the retainer. Pull out of the sump.
8. Remove any screws holding the base to the cabinet and remove the base.
9. Hold sump assembly, so it will not fall down. Remove old sump gasket. Clean opening of sump.
10. Put soap on gasket and install. Reverse procedure in order to reconstruct the dishwasher.
Thank you for your question and good luck with your repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
