Quick Question!

Have you ever purchased from PartSelect.com before?

https://www.partselect.com/Schematics/Maytag/55584.gif
See part 23 in the diagram
https://www.partselect.com/Schematics/Maytag/55584.gif

Dual Surface Element - 2500w/1200w

Your Price

$103.88
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11764902
Manufacturer Part Number W10823692
Manufactured by Whirlpool

This part works with the following brands: KitchenAid, Whirlpool, Maytag, Jenn-Air, Kenmore, Inglis, Amana, Magic Chef.

This part works with the following products: Range, Cooktop.

This part fixes the following symptoms:

  • Element will not heat.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

I am a novice at this kind of repair. Please send me step by step instructions on how to remove the glass cooktop so I can replace a dual coil. I think it is the coil and not the switch since the inner burner is working and the out one is not. Thank you.

Peter for model number RF367LXSY0
Answer:

Hello Peter, Thank you for the question. Here are some installation steps that we have listed here . Unplug range and remove the 4 screws holding the back panel on.Next unplug Dual Burner plugs.Next open the oven door and remove 2 screws from under front of top. Pull top out and up to unhook from the back. Remove the top and flip over the ranges glass top unit and lay on a flat surface. Remove the screws from steel bracket and remove it from the top. Next remove the attaching clips for burner .Next reinstall in new burner in the same place as old burner. Remove one wire at a time, transferring it to the matching plug on the new burner. Once the wiring is attached remove old burner and attach 2 clips to the bracket. Flip over the top and slide top into back of range and lower into place. Attach 2 screws under front. Reattach the tops plugs at the rear and reattach the back panel. Hope this helps

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

137 of 211 people found this instruction helpful

Parts Used:
  • Dual Surface Element - 2500w/1200w
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: GEORGE from NEWNAN, GA

Radiant element, 2400 watt, under ceran glass cok top needed replacement.

turned off power
removed ceran top from cabinet
removed element
installed new element
replaced top
powered up and was done

Help other customers find the most helpful instructions.

Were these instructions helpful?   

63 of 106 people found this instruction helpful

Parts Used:
  • Dual Surface Element - 2500w/1200w
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Michael from Howell, MI

Bad element

Bought new element and installed. Very simple. Used phillips
screw driver.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

37 of 43 people found this instruction helpful

Parts Used:
  • Dual Surface Element - 2500w/1200w
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Frank from Owls Head, ME

Double coil which center coil had burned out on glass top range

Unplug range and remove back panel (4 screws) unplug top burner plugs (2). Open oven door and remove 2 screws from under front of top. Pull top out and up to unhook from back. Remove top and lay cardboard on top of range. Flip over the ranges glass top unit and lay on cardboard. Remove screws from steel bottom and remove from top. Flip over steel bottom with burners attached. Remove attaching clips for burner and unscrew them from the burner then reinstall in new burner in the same place as old burner. Lay new burner on top of old burner and remove one wire at a time, transfering it to the matching plug on the new burner. When wiring is done remove old burner and attach 2 clips to steel backing plate. Vacuum off the glass top and reinstall the steel bottom to the glass top. Flip over the top, remove cardboard and slide top into back of range top and lower into place. Attach 2 screws under front. Reattach the tops plugs at the rear and reattach the back panel. Plug in range and slide back into place. Test units and all other burners. Done...

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Dual Surface Element - 2500w/1200w
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Gary from ELVERSON, PA

Center coil of dual element failed

Easy repair with Phillips screw driver and needle nose pliers. 1. Turn off Breakers or unplug range, Open oven door and remove the two screws holding the glass top to the oven frame. 2. Slide glass top forward and remove the two electrical connectors at the rear of the glass top, one on each side. 3. Remove the Phillips screw holding the ground wire from the rear top flange of the glass top. 4. Glass top can now be removed and placed glass side down on a padded flat table top. 5. Take a few pictures of the wiring and brackets for reassembly reference. 6. Remove the 4 wires from the defective heating element with needle nose pliers (note locations for reassembly to the new element) 7. Remove the Phillips screw on the rear side of the bracket holding the defective element. Carefully lift off the bracket. 8. Heating element can now be removed. 9. Remove the locating flanges from the defective element and install on the new element in the same locations. Clean glass if necessary and place new element on glass. 10. Carefully locate the flange tangs into the same holes on the bracket, reference photos or other side for locations. Ensure small element bracket was replaced in mounting slot of large bracket and reattach bracket screw. 11. Replace wires to same locations, remove and lightly pinch connectors if they appear loose, then reassemble. 12. Replace glass top on range, reconnect the two electrical connectors and ground wire, slide forward and replace the two mounting screws. 13. Restore power and check new element for function. Extension wires which came with the new element were not needed in this application. Total repair time about 20 min.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-4 of 4

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11764902
Manufacturer Part Number: W10823692
Brand Model Number Description
Kenmore66592012100Range
Kenmore66592012101Range
Kenmore66592014100Range
Kenmore66592014101Range
Kenmore66592015101Range
Kenmore66592022100Range
Kenmore66592024100Range
Kenmore66592025100Range
Kenmore66592029100Range
Kenmore66595012100Range
Kenmore66595012101Range
Kenmore66595014100Range
Kenmore66595014101Range
Kenmore66595015101Range
Kenmore66595022100Range
Kenmore66595024100Range
Kenmore66595025100Range
Kenmore66595029100Range
Kenmore66595775890Range
Kenmore66595775891Range
Kenmore66595776890Range
Kenmore66595776891Range
Kenmore66595779890Range
Kenmore66595779891Range
Kenmore66595792000Range
Kenmore66595794000Range
Whirlpool880652124P0Range - Freestanding, Electric
AmanaAER5725QAFRange - Freestanding, Electric
AmanaAER5725QANRange - Freestanding, Electric
AmanaAER5725QAQRange - Freestanding, Electric