Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David C - September 19, 2022
Verified Purchase
Easy repair.
Box was a little beaten up and the part creased but it installed on the freezer door easily and solved the frost problem. Contrary to instructions it was not necessary to remove the freezer drawer to remove the old gasket and install the replacement. This was a ten minute job.
★★★★★
★★★★★
JOSEPH B - February 26, 2021
Verified Purchase
fit perfectly, works great!
The part arrived ahead of schedule and fit perfectly. Completely fixed the problem we were having with our freezer door not being sealed.
★★★★★
★★★★★
Celia Y - October 21, 2020
Verified Purchase
Gasket install
Perfect fit. 5 minutes to install.
★★★★★
★★★★★
Donald P - April 29, 2020
Verified Purchase
Easy to install.
When the gasket arrived it’s box was crushed and torn partially open. The gasket was compressed and not easily decompressed. It appears that the gasket has decompressed enough to end thee appearance of ice outside the freezer drawer.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.9 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Icing up in the freezer due to poor gasket
Watched a couple of YouTube videos and then went at it
Maryann from BROOKFIELD, IL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Freezer door gasket needed replacing.
Simply removed old gasket. Started in a corner with installing the new gasket. It went in easily and quickly.
Stephen from DICKINSON, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice buildup in corner of freezer.
Reviewed instructions on YouTube. Removed storage box.Removed Philips head screw on either side of track. Lifted door and placed it on table. Using a flat blade screwdriver removed old gasket (it did not looked damaged). Pressed new gasket into groove in door. Replaced door onto track and replaced screws. Replaced storage box. No more ice
... Read more buildup.
Read less
Louis from BOYNTON BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice crystals appearing on the face of the freezer draws
Part Select had a great video which made the repair easy, using a putty knife to start removing the freeze door gasket. Once removed the install is simple just snap the new gasket into the track, but start at the corner. Other company's have a video requiring you to remove the entire freezer compartment out of the appliance, unnecessary w
... Read moreaste of time and labor.
Read less
Craig from SPRING HILL, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old gasket was damaged
i removed old and installed new gasket in 5 minutes. i watched a video. it was super easy .
Maria from TEQUESTA, FL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
JACK
March 10, 2023
GETTING WATER IN BOTTEN OF FREEZER
For model number LG LFX25950SW
Hello Jack, Thank you for your inquiry. Check the drain tube in the bottom of the freezer to see if it's clogged or frozen, and there should be a connector in the bottom of the freezer as well. Check the drain pan to see if it has any water in it. Good luck with your repair.
Can a bad freezer door gasket cause the evaporator to ice up?
For model number Lfxc24726
Hello Ian, thank you for reaching out. Yes, if the door gasket is damaged or not creating a reliable seal, humid air can leak into the freezer. When this humid air passes over the cold evaporator coils, it condenses and freezes on the coils. We hope this information is useful!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
