Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Doug
April 17, 2018
Pump picture for Kenmore .. #15 is this the rubber gasket that wraps the pump stem going up to the tub under the bottom arm that turns in dishwasher
For model number 66513269k114
Hi Doug, Thank you for the question. Yes, this grommet will be the seal you need. Good luck with the repair!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Abdalla
July 31, 2019
I have a KitchenAid dishwasher that has a problem leaking from the sump. The technician told me that the seal is not available in the market anymore and that now its sold together with the sump. The model number of my KitchenAid dishwasher is KUDE48FXSS5. Would part number WPW10538166 solve my issue by replacing the current seal I have only without having to get a new sump as well?
For model number KUDE48FXSS5
Hi Abdalla,
Thank you for your question. If the dishwasher is leaking from the area of the sump, then this grommet may solve this issue. If not not you may need to replace the sump. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
October 5, 2021
Black rubber particles on dishes. Near the sump look like tub grommet rubber particles are in the non drained water. Will a new grommet fix the problem or could the particles be from the door seal?
For model number WDF760SADT0
Hello Jay, Thank you for the question. if the Grommet shows signs of wear, it will need to be replaced. You can also check the seal, it should show visible damage or wear. We hope this helps!
Was this helpful?
Thank you for voting!
Customer Repair Stories
Average Repair Rating: 2.3 / 5.0, 4 reviews.
What's this?
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dishes not coming clean
Replace motor-pump. All was as advertised plus the surprise of included outlet hose. I didn't have the tool to operate the clamp, it leaked, so I replaced it with a stainless worm gear type.
WARNING!!! This is NOT the grommet that goes on the "pump stem" in the center
I purchased this misguided by the official response to "Doug" on April 17, 2018, which at the time was labeled as "most helpful". This is NOT the little grommet in the center. This is a big grommet that goes no the supply pump. This is #14 in the diagram. (#15 is actually the clamp that holds it). If you are looking for the little grommet that goes on that stem on the central recirculation pump, that part is not available, it only comes fused on the sump, and for replacing the sump you have to disassemble the whole bottom part of the dishwasher, pumps, sensors, valves, hose...even this big grommet. A lot of work, and since you are at it, you might want to replace both grommets. If you need THIS big grommet (#14) only, then it is not so much work, just take out one clamp, one connected cable, and the grommet to replace. But check if your machine has reusable clamps, because if not, you might want to order a new clamp. Good luck!
Monica from PITTSFORD, NY
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I damaged the grommet when removing the recirc pump
repair went smooth for the grommet. suggest a small of vasoline to ease installation of grommet
john from SANFORD, NC
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Develeoped a leak on the bottom.
Pulled dishwasher out of compartment, removed all parts underneath. removed inner parts, removed pump assembly. Installed new pump assembly and grommet. Reassembled in reverse order, test ran and unit was operating normal and no leaks.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
RICHARD V - February 5, 2021
Verified Purchase
Part fit prefect, fast delivery.
Part work great, still working on dishwasher. This part stop leak.
★★★★★
★★★★★
Jerriallen - June 8, 2018
Verified Purchase
Simple repair
My dishwasher is back working like new. This is a soft rubber part that was easy to install. I got it in a short amount of time & had it installed in under an hour.
★★★★★
★★★★★
Robert S - May 16, 2018
Verified Purchase
Part Recieved As Ordered
First time ordering from PartSelect. Part came in a couple of days and fit perfectly. Will order from PartSelect again.
★★★★★
★★★★★
Fred H - March 20, 2018
Verified Purchase
Easy repair
The part came in as expected and was easy to put on. The dish washer works great.
★★★★★
★★★★★
Randy M - February 27, 2018
Verified Purchase
Wrong part, can not use it, have to ship it back.
Not the part that I needed, next time will double check part number with the person on the other end of the phone..
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11756098
Manufacturer Part Number: WPW10538166
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
