This spark module is for ranges.
Spark module controls the spark for lighting the range's surface burners.
Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Jenn-Air.
Part# WPW10511278 replaces these:
AP6022501, W10511278
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tkoch
February 15, 2019
Does this module control the oven spark? Its just the oven that does not work and i replaced the igniter already. Broiler and burners work.......
For model number WFG510S0AW2
Hello Tkoch, Thank you for the question. The spark module is the Direct spark ignition board for the oven spark electrodes. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
November 23, 2019
Stove top burners (all 5) will not click/spark. Burner(s) can be lit manually. Assuming it is the spark module for the stove top. Oven spark works. Two spark modules are listed. Which is for stove top? Thanks!
Hi Jim, the burner spark module is part PS11755330. Thank you for your question and good luck with your repair!
Oven and broiler does not work, no spark. The 5 top burners light and work properly. The temperature sensor and gas valve have continuity.
Do I need a control module if the top burners light but nothing in the oven?
For model number Mgr8800fz0
Hello Peter thank you for contacting us. The control board appears to be defective, as it may not send the voltage to the bake and broil igniters, and the oven will not heat. The control board controls the oven's functions. It does not control the surface elements' functions. You may need to replace the control board, part number PS11753218. We hope this helps.
