Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leonard
August 19, 2019
Ok so this thing where the motor bolts to the lock for the jar inside one of those plastic pieces is broke. But I have no clue how to remove the locking plastic
For model number KSB1570ER0
Hello Leonard, Thank you for the question. First remove Coupler by tapping it clockwise. Flip the appliance over and remove 4 screws holding base. Next remove 4 more screws holding Lock-jar. 2 of those screws have spring with a washer. Then you can remove the lock jar. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Carol
June 19, 2023
Trying to remove the coupler to replace but it moves freely both directions on the lock jar base. How to remove?
For model number WPW10279256
Hi Carol, thank you for reaching out. We are providing you with instructions that will help you replace the coupler.
1- When you take the blender coupler off, it is left-handed threaded, so we have to turn the coupler clockwise.
2- Use a flathead screwdriver and hammer, and just give it a sharp tap so it spins in that direction.
3- Put the new coupler on and rotate it in an anticlockwise direction.
We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
