Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
If you notice an unusual noise coming from your freezer, the evaporator fan blade might be the problem. Frost-free freezer models use evaporator fans to move air through the evaporator for more efficient cooling. If the evaporator fan blade gets damaged or worn it may become noisy. If the blade is loose on the motor shaft or if the fins are damaged, it should be replaced. Be sure to remove power to the appliance before attempting any repair. The evaporator fan assembly is located behind the air grille or evaporator cover and can normally be accessed by simply removing a few mounting screws. The fan blade is normally pressed on to the motor shaft and secured by a spring clip.
How Buying OEM Parts Can Save You Time and Money
Why buy the real thing?
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Thomas G - January 25, 2018
Verified Purchase
Fan blade
Part was a perfect replacement
★★★★★
★★★★★
Calvert S - June 17, 2021
Verified Purchase
Great service!
The part was perfect and the repair was easy. In fact, the part was better than the original as it had an upgrade. Thank you for the great service
★★★★★
★★★★★
Robert C - February 6, 2018
Verified Purchase
Easy repair and the part was correct.
The part was an exact match and installed without difficulty. Arrived faster than anticipated.
★★★★★
★★★★★
Donna M - February 22, 2018
Verified Purchase
Worked as expected
The part arrived quickly and the motor and fan fixed the problem.
★★★★★
★★★★★
John F - April 20, 2022
Verified Purchase
The blade was a perfect fit; also the clip design was an improvement.
Had no problem installing the fan blade. The new clip design looks like it would prevent the blade from sliding on shaft against motor. The old blade failed because it did slide on shaft until it made contact with motor which damaged the blade and eventually locked up.
★★★★★
★★★★★
Bret J L - April 13, 2018
Verified Purchase
freezer evaprator motor fan
Part fit like a glove. Price was right and shipping was fast.
★★★★★
★★★★★
Lake Auto Service L - April 18, 2018
Verified Purchase
Exact replacement and quick shipping!
What more needs to be said? It works and the vibration/noise is gone from the freezer.
★★★★★
★★★★★
Charlotte R - August 15, 2018
Verified Purchase
Easy repair, part fit perfect!
The part came fast and was in perfect condition!
★★★★★
★★★★★
Walter A - June 22, 2018
Verified Purchase
Real easy repair
In great shape back working
★★★★★
★★★★★
Cuc N - August 10, 2018
Verified Purchase
Fan fixed noisy freezer
It was the perfect part and fixed the noisy freezer issue. The old blade was rubbing against two nails. The instructions to replace part was very helpful! Thank you!
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 5 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Evaporator fan was not running.
When we discovered that the freezer was not holding temperature we quickly moved everything we could to the freezer compartment of our refrigerator. I then removed the shelves and basket from the freezer. I used a Philips screwdriver and removed the 4 screws from the panel at the rear of the freezer. I discovered that 1 of the 4 f
... Read morean blades had broken off and was laying in the bottom of the freezer. I plugged the freezer in and found that the motor was not running. I removed the bracket which holds the fan and motor with a socket wrench.
When I received the fan and new motor I installed both by reversing the process.
The only issue I had to deal with was that the auto-defrost wire had to be carefully removed from the old motor plug and inserted in the new plug. Once that was accomplished everything was simple.
Read less
Terry from Cantonment, FL
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No problems
My brother repaired it but he said it was easy. Freezer works great again. Thanks guys
Turn off power to freezer. Removed two shelves, removed four phillip screws and cover. Used 5/16 nutdriver to remove two fan motor bracket bolts. Did not disconnect wiring, had enough room to flip motor over and remove broken fan blade and attach new fan blade. After reading remarks from another home tech, I reversed the bolts holding mot
... Read moreor to bracket, so nuts would not come in contact with fan blades again. Still not sure why fan would of slipped down to break. Running good now!
Read less
GREG from FLAGSTAFF, AZ
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
24 of 29 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Two blades on fan broken off
Ordered fan from Parts Select installed on fan motor and replaced cover.
Henry from Weatherford, TX
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
4 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Froze over fan motor burnt out
Removed shelves from inside freezer then removed 4 screws holding cover panel. Pulled panel up and slightly pulled forward to remove. Removed wiring connections then removed two screws that held the motor & fan assembly. Removed the support bracket from the old motor and installed same on the support bracket. Reversed removal procedur
... Read morees for installation. Cover panel is a little bit of a problem when trying to reinstall. Put in panel as high as you can and then slide down. You must then exert a little pressure on the bottom portion to get it to seat correctly. Install four remaing screws and you are done. I had this repaired previously by a professional repairman and noticed from the pictures you folks provided that he had installed the screws on the support bracket incorrectly. That was the reason for the fan blade to rip apart.
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stefanie
October 28, 2019
The freezer kicks on continuously and is very noisy while it is running. It also gets a thick ice build upon the bottom of the freezer and freezes the wire rack to the bottom of the freezer. When i pulled the cover off to find the source of the noise i did see the fan blades have some wear on them and the evaporator is where the water is dripping from.
For model number EVL201NXRQ04
Hello Stefanie, thank you for your question. We would recommend testing/replacing the thermostat, start relay, and overload as these parts work together to start the compressor and keep it running for the allotted time it takes to cool. If the water is coming from the evaporator, changing the aforementioned parts should fix the problem. If the problem persists, we would recommend testing the defrost timer, defrost heater, and defrost thermostat. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Freezer","title":"Freezer","url":"/Freezer-Parts.htm"},{"position":2,"name":"Fan or Blower","title":"Fan or Blower","url":"/Freezer-Fans-and-Blowers.htm"},{"position":3,"name":"WPW10445742","title":"WPW10445742","url":""}]
You added 1 item to your cart
✖
% OFF
$
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
