Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
STEPHEN S - May 17, 2019
Verified Purchase
Maytag dishwasher handle
Broke the handle on my dishwasher replacing the control panel (which I also ordered from here).
I was unable to determine the correct part from the website but a call to customer service cleared that up very quickly. The handle arrived very soon after I ordered it and it was exactly the part I needed. All in all very satisfied with the company and especially the service.
★★★★★
★★★★★
Thomas B - July 27, 2018
Verified Purchase
easy repair
it was the right part & was in good condition.customer service was a great help in locating the part. great job
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Selected functions did not obey buttons pressed. Logic Panel replacement
Remove the control panel, containing the buttons/switches. all you have to do is remove 4 screws behind the door, in the upper section. Two long screws and two shorter ones. Then remove the front door panel. To do that, remove 6 screws holding the front panel to the body of the door. Unplug 4 cables connectng the control panel to the door
... Read more. Remove the logic panel by pressing down on a plastic tab and sliding the logic assembly to the left. Plug all the cables to the new logic assembly. Install the logic board assembly by sliding it into place. Plug the cable that connects the switches panel to the logic assembly. Install back the front door panel with the 6 short screws. Lastly, install back the buttons panel with the 2 long screws and the 2 short screws.
Read less
George from RCHO STA MARG, CA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.