Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 23, 2023
Temp control will not adjust
For model number YWED75HEFW1
Hello Gary, thank you for contacting us. According to our research, this issue can be due to a faulty thermostat or knob. To check the thermostat for continuity, use a multimeter to test the thermostat's resistance by setting it to the RX 1 setting. Place each of the meter's probes onto the wire terminals. You should receive a reading of 0. The fact that the resistance is low, or near 0, means that the electrical flow is good. If the meter does not indicate 0 but reads infinity, your thermostat is faulty. To fix this issue, we recommend checking the following parts: timer knob, part number PS11738143, console housing, part number PS11754108, and thermostat, part number PS11746740. We hope this solves your problem.
