Whirlpool/Whirlpool_Thumb/I3LR28AY.gif
See part 48 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Spark Module

★★★★★
★★★★★
2 Reviews
$ 284.30   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11753037
Manufacturer Part Number WPW10331686
Manufactured by Whirlpool
Product Description

Spark Module Specifications

This is the part that substitutes for the spark module and also the transformer. It is now all in one board.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Kenmore, KitchenAid, Maytag.
Part# WPW10331686 replaces these:
AP6019728, 8054084, 8273970, 8273972, 8273977, 8522964, 9758080, 9758080R, W10331686
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

27 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 12, 2018
How do I check the spark module? Using a vom or just visually? What reading should i get, volts or ohms? Could there be an open in the bake igniter circuit?
For model number wfg371lvq0
Hi John, Thank you for the question.You can test it with a Multi Meter, If you read 120Vac at terminal J1-6, the spark module has failed. If there is no voltage at this terminal, the issue will be the control board. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Caesar Luevano
April 17, 2018
Oven turns on initially to bake on the desired temperature, but after a half hour it turns down to 150 degrees. We turn off the oven and let it cool down, then turn it on again and it will back again for only a half hour. What parts do I need to purchase? Thanks
For model number WFG510S0AS1
Hi Caesar, Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Derrol
November 20, 2018
Good morning, I'm trying to repair my gas range myself to save money. I am pretty handy doing repairs myself along with being an it computer service tech currently for 40 years, I have 2 issues which are both intermittent, first the left front burner will not always spark. When its doesn't spark i can light with a lighter and the burner will light. I have swapped the spark igniter from another burner and no change so i know it is not the igniter, what is next?The second issue is that oven will not always light and sometimes when it does light and heat it will stop heating after it is on for awhile? one thing i noticed is that normally when it lights you hear "click" just a second before it lights, when it doesn't light there is no "click"? any help on what parts or more troubleshooting would be helpful. this gas range was purchased in 2000-2001
For model number SF385PEGQ5
Hi Derrol, Thank you for your question. If the left front burner is not coming on, then the issue is likely either a switch on the wiring switch harness or the spark module and you will need to check the parts to see which one is causing the issue. If the oven is not lighting, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the broil igniter, the bake burner with spark igniter, the gas valve and the spark module. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Eric
August 27, 2017
Was cleaning range, this part got wet, no spark after that? Hoping that this part will fix the problem? Will be more careful in the future thank you eric.
For model number KGSS907XSP01
Hi Eric, Thank you for your inquiry. I think that with your situation, replacing this part should fix your problem. It is an electronic board so if water gets on it at all it could fry some of the components. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Elizabeth
March 28, 2019
Two weeks ago i replaced the bake igniter, which i purchased from partselect. Sometimes the oven would not ignite or heat up. Other times it worked fine. It was very sporadic. So i replaced the bake igniter. Again, i am having the same problems so i assume it is something else causing the problem. No issues with the stovetop burners, just the oven. Please give me your thoughts.
For model number GFG461LVQ2
Hi Elizabeth, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your igniters with a multi meter to see if they are working correctly or not. They should be reading between 0 - 1100 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board or the spark module. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Harry
April 16, 2018
My KitchenAid will not spark or lite the cook top or gas burners inside stove. I am trying to repair it myself. What part would cause this issue?
For model number Kgsk901sss00
Hello Harry, thank you for your question. The most likely issue is the Spark Module WPW10331686 . You can test it with a Multi Meter, If you read 120Vac at terminal J1-6, the spark module has failed. If there is no voltage at this terminal, the issue will be the Control, Interface part number WP9762793. I Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
June 20, 2019
Will this stop beeping?
For model number WFG540H0AS0
Hi Gary, thank you for your question. If your spark module is clicking constantly then you may have to test it with a multi meter to determine if it is still functioning or not. If it is not then you may have to replace the part. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
John
November 26, 2017
Every thing on this oven/stove works fine except the stove ignitor, it clicks when you go to light the stove top but no spark comes from sparkers. We have to light it manually. Any input would be helpful. Thank you
For model number KGSS907SSS00
Hi John, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the thermostat, the spark module, the gas valve, the broil igniter the temperature sensor and the bake burner electrode. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
John
January 11, 2018
All burners light, but when trying to light oven, right rear burner igniter sparks but not oven. Is this problem the spark module or the electronic control board?
For model number WFG371LVQ0
Hi John, Thank you for your question. If the oven will not light, then you will need to check the bake igniter, the broil igniter and the spark module. I hope this helps. Thank you and have a great day!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Aaron
January 29, 2018
My range has 5 burners on top. The 4 outside burners won't ignite, while the 5th (center) burner does. The oven and broiler work fine. Is this the part that needs to be replaced, or possibly something else?
For model number WFG381LVS
Hi Aaron, Thank you for the question. If the Spark Module was defective, most likely none of the elements would light. Sounds like an issue with the Spark Ignition Switches with Wire Harness, Part Number PS11746057. This harness has the switches for the 4 burners that are not working.The middle burner is on a separate switch with harness. Hope this helps!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 2.8 / 5.0, 1 reviews. What's this?
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    stove will not start no spark or gas
    part did not fix the problem, may be gas regulater ,well if you are changing this part,not to bad .remove the knobs bottom screws and two side screws front cover flips up and off ,the ignition control is in front of you right side ,remove the one screw that is looking at and everything slides out .i turned off the gas and elec and removed the gas line and carefully laid the stove on it back.made it easier ,good luck
    • HERBERT from ISELIN, NJ
    • Difficulty Level:
      A Bit Difficult
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers, Wrench (Adjustable)
    • Parts Used:
      WPW10331686
    49 of 101 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      2 Reviews
      3.0
      Filter By Rating:
      • 5 Stars
        1
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        1
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11753037
          Manufacturer Part Number: WPW10331686
          Brand
          Model Number
          Description
          Kenmore
          66572002100
          Range
          Kenmore
          66572002102
          Range
          Kenmore
          66572002103
          Range
          Kenmore
          66572002104
          Range
          Kenmore
          66572004100
          Range
          Kenmore
          66572004103
          Range
          Kenmore
          66572004104
          Range
          Kenmore
          66572012100
          Range
          Kenmore
          66572012102
          Range
          Kenmore
          66572012103
          Range
          Kenmore
          66572012104
          Range
          Kenmore
          66572014100
          Range
          Kenmore
          66572014101
          Range
          Kenmore
          66572014103
          Range
          Kenmore
          66572014104
          Range
          Kenmore
          66572022100
          Range
          Kenmore
          66572022101
          Range
          Kenmore
          66572022102
          Range
          Kenmore
          66572023102
          Range
          Kenmore
          66572024102
          Range
          Kenmore
          66572029102
          Range
          Kenmore
          66572132300
          Range
          Kenmore
          66572132301
          Range
          Kenmore
          66572133300
          Range
          Kenmore
          66572133301
          Range
          Kenmore
          66572134300
          Range
          Kenmore
          66572134301
          Range
          Kenmore
          66572152300
          Range
          Kenmore
          66572153300
          Range
          Kenmore
          66572154300
          Range

          Get in touch, we're here to help!

          Open until 10PM EST

          Contact Customer Service