This drip bowl is used for electric cooktops and ranges, it is designed to sit under a 6-inch surface burner. It catches the drips and spills coming from the cookware on the surface burner. This drip bowl is chrome, and it has a diameter of 8 inches. You need to remove the burner element to replace this part. Line the hole up with the element terminal blocks, and ensure the new bowl is flush with the surface of the cooktop before replacing the burner element. Drip bowls need to be replaced when they are lost, damaged, or you are no longer able to clean them adequately. This replacement part is sold individually.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ryan
September 23, 2019
Is this a single drip pan, or a set of two (2)?
For model number RF362BXBW0
Hi Ryan,
Thank you for your question. The drip bowls are sold individually. I hope this helps. Thank you and have a great day!
12 people found this helpful.
Was this helpful?
Thank you for voting!
Irene
December 31, 2019
Will these drip pans fit an old jenn air range model c206?
For model number C206
Hello Irene, thank you for your question. The small drip bowls are Part Number: PS1854703 and the large are Part Number: PS2079053 for this unit. Please enter the part number into the site for current price and availability. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
DARLENE
January 14, 2020
Is rs675pxyh the same as rs675pxyh0?
For model number RS675PXYH
Hello DARLENE and thank you for writing.
They are basically the same model and most parts can be interchanged, so in the case of the drip bowls, it does not matter as they will fit both models. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Judy
September 21, 2021
The ser. number to my Whirlpool range is R74527766. The drip pan that my whirlpool needs has three slots the burner clicks into. The pans that are pictured with the model number given, that you have listed, do not have the slits. Can you please help me with this?
For model number WFC310S0ES1
Hello Judy, Thank you for the question. Whirlpool no longer makes the bowls with 3 slots for the element legs. They have been updated and the one slot drip pans we carry will fit this model Range. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Hello Dawn, thank you for contacting us. To balance the burner, gently remove the burner from the stove. Reseat the burner firmly, ensuring a solid connection between the base of the burner and the top of the stove. If this does not resolve the issue, and the burner element is also not wrapped then the element receptacle, part number PS389217, may be bent and needs to be replaced. We hope this helps.
Is there any chance i could get black drip pans for this range? Thanks gayle
For model number wfc310s0es1
Hello Gayle, Thank you for your inquiry. We are only showing the chrome drip pans as compatible to this model. Hope this helps!
Was this helpful?
Thank you for voting!
Lin
August 2, 2018
Will this fit a Estate stove drip pan?
For model number TEP315VQ
Hello Lin, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11750108 for the smaller bowls and Part Number: PS11750107 for the large Bowl. Hope this helps!
Was this helpful?
Thank you for voting!
Diana
November 18, 2022
Hello,
Will these drip bowls (both 8" and 6'') fit my Whirlpool stove model (MOD. YRF115LXVQ 0, SER. R 12455231).
Thank you.
For model number YRF115LXVQ0
Hi Diana, thank you for the question. Yes, the Drip Bowl - 6 Inches, the part number is PS11750108, and the Drip Bowl - 8 inches, the part number is PS11750107, will fit your model. Customer service is always available to help you place an order if you are having trouble doing so. Good luck with your repair.
Does the chrome drip pan for a Roper range fit the Whirlpool drip products you are selling?Products are made for standard sized ranges.
For model number FES33060
Hello,
Thank you for your question. From reviewing the model information you provided, it looks like your model number would be FES330GQ instead of FES33060. The part number listed for the 6 inch drip bowl under model number FES330GQ is PS2366565. To place an order for the part you may order it either online, by visiting our live chat sessions, Monday to Friday from 8AM to 4PM EST, or by calling our customer service line at 1-888-738-4871 and anyone will be happy to assist you. We hope this helps. Thank you and have a great day.
Average Repair Rating: 4.6 / 5.0, 33 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
oven wouldn't heat
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, then removed element and replaced with new .
Drilled out old and broken hold down clips, installed new ones(4). Cut old wires attached to surface plug in block, striped wires, and attached new plugin kit(4), warmed up heat shrink with a hair dryer, put in new drip bowels, the stove is like new. I ordered the parts on line early one morning, the next day they were at my door and installed that day, everything that I ordered was there, and fit properly.
Removed the two screws holding the heating element to the back of the oven. Pulled the wires away from the connections of the old element and connected the new element. Reinstalled the screws holding the element to the back of the oven. Easiest repair I've ever done! Replaced the drip pans on the cook top and installed the new clock knobs. Good as new!
Needed to replace chrome drip bowls and replace one of the hold down clip since previous owner used incorrect drip bowls and put pressure on the hold down clip.
Pulled out the electric element from the range, replaced the new drip bowl on three of the burners and then replaced the electric element pushing it into the hold down clip. On the fourth burner, I removed the electric outlet, the previous incorrect drip bowl and had to drill out the broke off hold down clip that was no longer there. Next I placed the new hold down clip in position, alligned and fed the little screw through the hold down clip. I used a vice grip to hold the nut in place and with a screw driver tighened the nut. I placed the drip bowl in place, attached the electric element and slipped it into the new hold down clip. Everything went smoothly and I experienced an excellent repair job. We received prompt service and had no problems. I just hope the used appliance that we bought works now. It looks great. It is for a rental unit.
one of my burners would only work half the time, and you had to wobble it to make it work
First I removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires, connected the new element using the wire caps, and finished bye rescrewing the element backinto place.
We love our Jenn-Air electric range that we have owned since 1983 and couldn't get parts from where we bought it recently. We called around to Sears and other appliance dealers and they couldn't help us. We found your company searching on the internet and we are very much pleased with your parts listing and your great service. We will be back. Jody and Mike Hayden, Eden, Vt.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Mary Ellen S - 9 days ago
Verified Purchase
Too easy!
Love that I now have the perfect parts for my range. So quickly delivered, and so quickly installed!
★★★★★
★★★★★
David L - April 9, 2023
Verified Purchase
Good fitting part
Good fit good price
★★★★★
★★★★★
Jamin S - March 10, 2023
Verified Purchase
Great, reasonably priced replacement.
I ordered four drip bowls in total, one was dented but I was able to bend it back into shape, that speaks more to the package handler and not the part itself. The pans fit perfectly for the advertised model number. I'll definitely be using partselect.com for future appliance parts.
★★★★★
★★★★★
Virginia A C - August 11, 2022
Verified Purchase
Shiny new parts
This is the second (maybe third) time I've replaced the drip pans. Something burns on them, making them too difficult to clean and look good.
I was disappointed by the packaging. There was almost no protection against damage, thus the pans arrived with bent edges and small "dings" in the bowl area of two of the four pans. Since it would have been a bigger hassle to return and try for another shipment, I opted to find a way to "rub" the edges to make them work. They are not perfect, but better than when arrived. Were it not for that damage, I would have been quite satisfied with the drip pans. but, because of it, I am nominally satisfied!
★★★★★
★★★★★
Gene P - June 9, 2022
Verified Purchase
Looking for drip bowls for a Caloric electric stove for years
Thank you so much. Have been looking to replace woobly, burned out drip bowls for our Caloric Stove for years. Frying pans and kettles were not level. Now our stove is like new. Bravo and thank you for the quick service.
★★★★★
★★★★★
Anne T - May 26, 2022
Verified Purchase
Perfect Fit - Quick Delivery
These 6 inch and 8 inch drip bowls I ordered fit perfectly on my stove. The order arrived quickly. I would order from PartSelect again!
★★★★★
★★★★★
Barbara R - February 27, 2022
Verified Purchase
Good Quality Item
This was exactly what I needed.
★★★★★
★★★★★
Frederick M - December 29, 2021
Verified Purchase
Worked perfectly it’s fits
It fits perfectly look nice ?? it was long overdue but late is better than never
I will order parts again from you when in need
Frederick
★★★★★
★★★★★
Margaret R - November 23, 2021
Verified Purchase
Great Product
This product was a perfect match to our Stove. I have bought the samething from other suppliers and they didn't fit my stove. This product was a perfect match.
★★★★★
★★★★★
Cindy K - June 19, 2021
Verified Purchase
Exactly what I needed!
The part was exactly what we needed, new condition and received quick and as reported.
The Fix App makes it easy to manage all your stuff in one place. Just snap a photo and we'll find and store your user manuals, receipts, and product information in one easy-to-find place!
"Like magic. I took a picture of the model number on my refrigerator, and the app identified it right away … Very convenient. I'm impressed." ★★★★★ - Clever Jeff
