Part Location Diagram of WPW10195091 Whirlpool Thermostat
See part 26 in the diagram
Replacing your KitchenAid Dishwasher Thermostat
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.com

Thermostat WPW10195091

★★★★★
★★★★★
2 Reviews

Rated by 1 customer 

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

$ 44.96
  In Stock
Get FREE EconoShip on orders over $100! T&C apply

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

Does this part fit my model?

Need help finding your model number?
PartSelect Number PS11750035
Manufacturer Part Number WPW10195091
Manufactured by Whirlpool for KitchenAid, Kenmore, Whirlpool, Maytag
Product Description

Thermostat Specifications

This genuine OEM thermostat is sourced directly from the manufacturer to ensure compatibility with your dishwasher model. The thermostat monitors and regulates the temperature of the dishwasher heating element. It is responsible for ensuring that the water temperature reaches the optimal level for effective cleaning while also helping to prevent overheating and potential damage to the internal components of the dishwasher.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your KitchenAid Dishwasher Thermostat

Replacing your KitchenAid Dishwasher Thermostat
Troubleshooting
This part fixes the following symptoms:
Not drying dishes properly | Not cleaning dishes properly | Will Not Start
This part works with the following products:
Dishwasher.
Part# WPW10195091 replaces these:
AP6016742, W10195091, W10339563
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
  • 5 Stars
    2
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
  • 1
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 1 reviews. What's this?
Sort by:
  • 1
Sorry, we couldn't find any existing installation instruction that matched.
Dishwasher does not finish its cycle. The sanitizer light flashes red and there is soapy water left in the dishwasher.
I replaced the thermostat (part # PS11750035) along with the heating element (part # PS9494999) and the turbidity sensor (part # PS11757214). I also checked the filter (part # PS11759673) and it was very clean with no holes. The dishwasher still has water and soap suds standing in dishwasher after I ran it through different cycles. Also, when I run the sanitize cycle the sanitize light flashes red at the end. It doesn’t appear to completely filling with water. Also my hot water temperature is 130 degrees after running for 1 minute. I am at a loss! Any suggestions?
  • Ron from OKLAHOMA CITY, OK
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Wrench (Adjustable)
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

16 questions answered by our experts.
Sort by:
  • 1
  • 2
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Harry
January 27, 2018
The dishes are not drying and the "sanitize" light is blinking at the end of the cycle. The dishes are wet. I have tested the heater element and I have some resistance at ~14 ohms. The thermostat shows continuity at room temperature; however, I am not sure at what temperature it should go to infinite? If those two items are fine then would it be with the control board?
For model number WDF775SAYW3
PartSelect logo
Hello Harry, Thanks for your question. The electronic control board is PS8260225 - this is rarely the issue, but it could be worth cutting off power to the dishwasher for one minute and then restarting it to see if that fixes the issue before replacing the board. The heating element should read between 8 and 30 ohms so that is testing properly. High limit thermostats are open at room temperature. If cutting the power does not work, you may need to replace the board. I hope this helps.

9 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Mike
April 29, 2018
This dishwasher was approximately 18 months old when it stopped drying the dishes properly. The dishes are always wet on completion of the washing cycle - no heat drying ability. I've tested the heating element and it rings out closed or @ 0.0 ohms. I've also tested the thermostat in the same manor - again it rang out closed or @ 0.0 ohms. The heating element to me is ok with the continuity test - not open or damaged. The t-stat on the other hand shouldn't be ringing out @ 0.0 ohms and should have some resistance... am i on the right track? or are both parts sounding faulty?
For model number KDTE104ESS1
PartSelect logo
Hi Mike, Thank you for your question. If the heating element is reading fine, then I would replace the theromstat. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Carmelo
January 11, 2019
My dishwasher wont start, i checked the breaker and the gfi and they are both working
For model number KDTE204DSSO
PartSelect logo
Hi Carmelo, Thank you for your question. If your dishwasher will not start, there are some parts that you will need to check to see which ones are causing the issue. You will need to check the door balance link kit, the turbidity sensor, the door latch, the overfill control switch and the thermostat. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Kate
March 17, 2020
The dishwasher is getting as hot as it normally does. During the wash cycle, the water is warm but not as hot. Also during the drying cycle, it’s not getting hot enough to dry the dishes. The heating element is brand new. We are wondering if the thermostat needs to be replaced.
For model number KitchenAid KDFE104DBL2
PartSelect logo
Hello, Thank you for your question. The parts that solve that issue is the Element and the thermostat. If the element is new and working properly it could be Thermostat- PartSelect Number PS11750035. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jim
January 31, 2019
My dishwasher quit during the dry cycle. I opened it and it was very hot and steamy, pressed start and it completed the cycle. This was after previously having problems and checking the heater which measured 16 ohms, and replacing the thermostat. After replacing the thermostat, i ran it through a diagnostic cycle which it completed fine, then ran it through a normal wash cycle with prodry selected (empty) and it completed fine. So we loaded it with dishes and ran a normal was cycle with prodry and it stopped during the cycle. Could the heater have a sporadic problem? Should i replace it even though it measures as good, or, is there another more likely part to check/replace?
For model number DTE404DSS0
PartSelect logo
Hi Jim, thank you for your question. If your heater is measuring working then you would not need to change it. I would suggest taking a look at the turbidity sensor perhaps. However the problem might actually be in your control board itself if it is not in the smaller parts like the thermostat and the sensor. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ken
July 31, 2018
We have moisture on the door when we open after cycle has completed! This also caused silverware to have moisture on it! In checking we opened door during drying cycle and it appears to be heating properly! Any suggestions!
For model number WDF760SADB2
PartSelect logo
Hello Ken, Thank you for the email. I suggest checking to see if the door seal has wear and needs to be replaced. Also make sure the door is closing securely and is not lose allowing moisture and heat out during the drying cycle. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Pete
February 16, 2022
My dishes aren't drying properly. I replaced the heating element and the thermostat. Is there something I'm missing? What should I try next? Thanks, Pete
For model number wdta50sahZ0
PartSelect logo
Hi Pete, Thank you for your question. If your dishwasher is not drying the dishes and you have replaced the heating element and the thermostat, check the rinse aid on the detergent dispenser. The rinse aid or the rinse aid dispensing door could be the reason why your dishwasher is not fully drying your dishes. Without the rinse aid, the dishes will not shed water easily and they will not dry properly. Your rinse aid dispenser will be found on the inside of the door, open the rinse aide door on the dispenser. After verifying that there is rinse aid in the chamber, inspect the door and chamber for any signs of discoloration, warping, or any other damage. If you find any issues with your rinse aid dispenser door while performing this inspection, you will need to replace the detergent dispenser. The part number listed under your model number for the detergent dispenser is PS11731570. If you need to place an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jeremy
February 3, 2020
My dishwasher occasionally keeps washing dishes and never stops until we open the door and manually set it to drain. We think it might only do this when we use the normal wash cycle, bunt we haven’t experienced it on express wash. We think it is just an ever ending wash cycle,and never drains. Water gets hot, everything else seems to work. Thanks for any advice.
For model number Kdte204dss0
PartSelect logo
Hello Jeremy, thank you for your question. We would recommend testing/replacing the thermostat and the turbidity sensor. If the sensor is bad, it will continue to detect dirty water and keep washing. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jim
January 22, 2019
Our dishwasher won't complete it's cycles. If i just start it, it will fill with water then just blink the front light - not run. If i run the water at the faucet until it is really hot, it will complete the first cycle, but, then it may not run the rinse cycle. If it completes that, it begins blinking during the dry cycle.I assume the problem is with the heater or the thermostat. is there a way to determine which without removing the parts and testing? are there any other parts that could be at fault?
For model number KDTE404DSS0
PartSelect logo
Hello Jim, Thank you for the question. Unfortunately the only way to know for sure if they are defective is to remove and test them. If the element and thermostat is good, you may need to replace the main control board. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Jim
January 22, 2019
Following up on my prior question - i measured the resistance of the heating element - it was 12 ohms which seems to be an acceptable range from the other messages. I then measured the resistance of the thermostat (assuming it is the part on the spring bracket near the front of the dishwasher near the water inlet) and it was zero at room temperature. You'd commented previously that this connection was normally open at room temperature, so, is it good or bad? If bad - can you tell me how to remove it?If good do you have other suggestions of what i can check to find out what is wrong with our dishwasher?
For model number DTE404DSS0
PartSelect logo
Hello Jim, Thank you for the question. If there is no reading at all then it sounds like it can be defective. The thermostat just plugs into place. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
  • 1
  • 2
You May Also Need ?
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11750035
Manufacturer Part Number: WPW10195091
Brand
Model Number
Description
Kenmore
2213222N414
Dishwasher - Kenmore Dishwasher 2213222n414
Kenmore
2213223N414
Dishwasher - Kenmore Dishwasher 2213223n414
Kenmore
2213229N414
Dishwasher - Kenmore Dishwasher 2213229n414
Kenmore
2214523N611
Dishwasher - Kenmore Dishwasher 2214523n611
Kenmore
2214545N711
Dishwasher - Kenmore Dishwasher 2214545n711
Kenmore
2214715N710
Dishwasher - Kenmore Dishwasher 2214715n710
Kenmore
2214792N512
Dishwasher - Kenmore Dishwasher 2214792n512
Kenmore
2214793N512
Dishwasher - Kenmore Dishwasher 2214793n512
Kenmore
66512762K312
Dishwasher - Dishwasher
Kenmore
66512762K313
Dishwasher - Dishwasher
Kenmore
66512762K314
Dishwasher - Kenmore Elite 66512762k314 Dishwasher
Kenmore
66512763K312
Dishwasher - Kenmore Dishwasher 66512763k312
Kenmore
66512763K313
Dishwasher - Dishwasher
Kenmore
66512763K314
Dishwasher - Kenmore Elite 66512763k314 Dishwasher
Kenmore
66512769K312
Dishwasher - Kenmore Dishwasher 66512769k312
Kenmore
66512769K313
Dishwasher - Dishwasher
Kenmore
66512769K314
Dishwasher - Kenmore Elite 66512769k314 Dishwasher
Kenmore
66512772K313
Dishwasher - Kenmore Dishwasher 66512772k313
Kenmore
66512772K314
Dishwasher - Kenmore Dishwasher 66512772k314
Kenmore
66512773K313
Dishwasher - Dishwasher
Kenmore
66512773K314
Dishwasher - Dishwasher
Kenmore
66512774K312
Dishwasher - Kenmore Dishwasher 66512774k312
Kenmore
66512774K313
Dishwasher - Kenmore Dishwasher 66512774k313
Kenmore
66512774K314
Dishwasher - Kenmore Elite 66512774k314 Dishwasher
Kenmore
66512776K311
Dishwasher - Kenmore Dishwasher Model 665.12776K311 (66512776K311, 665 12776K311) Parts
Kenmore
66512776K314
Dishwasher - Kenmore Dishwasher 66512776k314
Kenmore
66512776K315
Dishwasher - Kenmore Elite 66512776k315 Dishwasher
Kenmore
66512779K312
Dishwasher - Kenmore Dishwasher 66512779k312
Kenmore
66512779K313
Dishwasher - Kenmore Dishwasher 66512779k313
Kenmore
66512779K314
Dishwasher - Kenmore Dishwasher 66512779k314
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service