The timer controls most of the operations of the washer: water level, tub filling and emptying, length of cycles, and cycle setting sequences.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Maytag.
Part# WPW10187167 replaces these:
AP6016562, W10187167
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer would not advance
After looking at the new part and reading how to take off the original timer, it then took me about 15 min to put the new part on the machine. My sister-in-law told me her boyfriend had repaired his washer buy buying the part on line. Sears wanted over three hundred dollars. I got on line and fixed it myself, don't be afraid to try and s
... Read moreave a few bucks by doing it yourself, you can always find a how to on line. And I didn't have to wait from 8:00 - 12:00 for the repair man!!!!!
Read less
laura from la habra, CA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
49 of 68 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
November 13, 2019
Top load Kenmore washer starts to agitate before water fills. Is this most likely a timer problem?
For model number 110.29822800
Hello Roger and thanks for writing.
Usually, when this happens, it is because of the load sense switch. The relay in the switch sticks and allows the washer agitate to before it fills. A simple check is to access the load sense switch and unplugging the wires to it. Then check the operation. We hope this helps. Please contact us at any time
.
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a technician.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Anthony
January 9, 2020
Washer is not allowing water in the tub. Screens are clean and I have good water pressure
For model number 110.29822800
Hello Anthony, Thank you for the question. I suggest testing the Water Valve. Set your multitester to the R X 1 ohms setting to test for continuity. Place each of the multitester's leads on a terminal. Your multitester should display a reading between 200 and 500 ohms. Closely examine your water inlet valve. The exact ohm resistance rating you should test for may be marked on the valve. We hope this helps!
