Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
David S - November 12, 2022
Verified Purchase
Easy to install
The installation went well & the part works great. It has been in the dryer for about a month.
★★★★★
★★★★★
Douglas E - June 18, 2022
Verified Purchase
correct part easy repair
correct part came 5 days after order and easy installation
★★★★★
★★★★★
Jeff F - November 11, 2021
Verified Purchase
Dry repair
The part came earlier than the said easy to install dry up and work properly now
★★★★★
★★★★★
EARL G - March 25, 2021
Verified Purchase
Timer replacement for my Kenmore dryer
The part came quickly as promised and was very easy to instal
★★★★★
★★★★★
Brian M - February 15, 2021
Verified Purchase
The new timer gave new life to our dryer
Our dryer was intermittently working and was unreliable. The timer was identified as the reason. I ordered a new one from PartsSelect and a few days later it arrived. I took the opportunity to clean the inside of the dryer of lint and in a few minutes replaced the timer. Now our dryer is like brand new even though it is 20 years old-a great Kenmore appliance built to last-thank you!
★★★★★
★★★★★
Robert L - June 22, 2019
Verified Purchase
Part broken and useless when it arrived
I need a new part, one that isn't broken. I hope I won't be charged a second time to get a working part.
June 24, 2019
Hello Robert, Thank you for leaving a review on the part ordered. Checking the order I am showing you have already contacted us to address the issue. Please let us know if there is anything else we can assist you with.
★★★★★
★★★★★
Pam D - June 3, 2019
Verified Purchase
Easy repair
Was simple, I changed the part myself husband was to busy needed it done
★★★★★
★★★★★
James D - April 30, 2019
Verified Purchase
easy to replace
Works like new! Very happy!!
★★★★★
★★★★★
Daniel C - April 10, 2019
Verified Purchase
Great part
Part was right, service great, delivery fast, repair made in no time! 5 stars!
★★★★★
★★★★★
Terry M - April 2, 2019
Verified Purchase
Kenmore dryer timer replacement.
Kenmore dryer would not heat. After thermal fuses and heating element tested ok. Timer failed continuity test. Ordered timer. The part came in great condition, packaged well, and fast shipping. Dryer is heating again.
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 4.7 / 5.0, 2 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer shaft broke off
Removed back cover. Removed old timer and connected wiring to the new one. Installed new timer and put the back cover back on.
Dean from DAYTONA BEACH, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No heat.
Replaced the timer .
Robert from SPRINGFIELD, OH
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tim
September 25, 2017
The dryer will operate correctly on moisture sensing mode, heats to correct temperature setting. On the other hand, when using the time dry mode, the heating element will not heat up at all. I have check all the thermostats for continuity, they seem to be ok. Could this be a problem with the timer or sensing control board?
For model number 110.61202011
Hi Tim, Thank you for the question, Sounds like the Timer, PartSelect Number: PS11749835 is defective and needs to be replaced to fix the issue you are having. Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Jimmy
January 22, 2020
Dryer works but on timer mode timer doesn't work is there a way to fix, timer is expensive
For model number 110.65132411
Hello, Thank you for your question. I apologize for the inconvenience, however it seems that the issue typically is the timer itself. I would check the knob and connectors and if all looks good, the timer will need to be replaced. That is part#WPW10186032. We hope this helps.
6 people found this helpful.
Was this helpful?
Thank you for voting!
Chasity
November 3, 2017
I have replaced the heating element all the thermostats and I'm still getting cold air instead of hot, could this be a timer issue.
Hi Chasity, Thank you for the question. Yes this could be the timer not sending the signal for the element to start.You can test the timer to see if it is giving out 120V. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Alberto
December 15, 2017
If this part goes out, will it cause the dryer not to dry? Everything else seems to check out, but not sure about timer. Please help. Thank you
For model number 11061202011
Hi Alberto,
Thank you for your question. It could if it does not start the cycle. More times than not the reason your appliance will not heat is because of one of your thermostats, your thermal fuses, heating element, or your door switch. All of these parts can be tested with a multi meter to check though. Including the timer. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
August 19, 2019
My timer works but the knob broke off. If I order this part does it include the knob as well? My knob broke off since it’s plastic attached from the knob to the timer. I've only had this dryer for 3 years. Guess overtime the plastic hardens and breaks.
Hello, thank you for contacting us. This is just the timer switch, the knob is not included. In order for us to locate the correct parts we will require the model number of the dryer. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jami
June 25, 2021
Dryer heats and works fine, but will not shut off. The dial never moves from the position in which it was set. Is this a timer issue or something bigger? Thanks in advance for you advise.
For model number 110.75132412
Hi Jami,
Thank you for your question. If your dryer will not shut off, there are some parts that you will need to check to see which one is causing the issue. You will need to check the dryer cycling thermostat, the thermal cut-off kit and the timer. We hope this helps! Good luck with the repair!
I need the terminal letters on this timer to check for continuity
Hello Roger, Thank you for the question. The red wire from timer terminal "A" carries 120Vac from the timer to the heating circuit. This would be the test point for the timer. The heating circuit has to be broken and energized to separate L1 form L2 to determine the origin of the issue in this test also. Hope this helps!
Was this helpful?
Thank you for voting!
David
January 17, 2020
How do you change the timer of this type of dryer
For model number 11071202011
Hello David,
Thank you for your question. Unplug the dryer, then take off the screws of the back control panel where the timer will be located and take a picture of how the original was wired. Simple unhook the wires off and replace the timer and make sure to plug in the wires in the same places the original was wired, refer to your photo, and screw the panel back on once your done. We hope this helps.
Was this helpful?
Thank you for voting!
Asfaw
February 10, 2022
Is there a store I can pick my self
Hi Asfaw,
Thank you for your question. We do not have any local stores where you could pick the part up. We are an online company and we would have to ship the part to you. If you would like to place an order for a part, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Don
July 7, 2022
The timer knob broke off, I believe I need to buy the whole assembly it fits into correct.
For model number 11075132412
Hello Don, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11749835 for the Timer Switch that has the Shaft for the Knob to slide onto and PartSelect Number PS10056941 for the Timer Knob. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
