Quick Question!

Have you ever purchased from PartSelect.com before?

11748729-1-S-Whirlpool-WPW10130695-Door Handle and Latch Assembly with Switches
11748729-1-S-Whirlpool-WPW10130695-Door Handle and Latch Assembly with Switches 11748729-2-S-Whirlpool-WPW10130695-Door Handle and Latch Assembly with Switches 11748729-3-S-Whirlpool-WPW10130695-Door Handle and Latch Assembly with Switches https://www.partselect.com/Schematics/Maytag/58126.gif

Door Handle and Latch Assembly with Switches

Your Price

$30.68
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11748729
Manufacturer Part Number WPW10130695
Manufactured by Whirlpool

This is a part found in your dishwasher. This part includes the black handle, latch, and 2 switches. This part is a simple on/off mechanism that prohibits the dishwasher from operating when the door is open. NOTE: White handle is no longer available. If you notice any one of these symptoms it could be due to the breakdown of your door handle and latch assembly: your door latch is not operating properly; the door will not shut/open; the touchpad is not responding; the machine will not start or is leaking. All you will need is a 20 torx bit screwdriver. You will need to remove the inner panel to access this part.

This part works with the following brands: Maytag, Jenn-Air, Crosley.

This part works with the following products: Dishwasher.

This part fixes the following symptoms:

  • Door latch failure.
  • Will Not Start.
  • Door won’t close.
  • Leaking.
  • Lid or door will not open.
  • Touchpad does not respond.
  • Not cleaning dishes properly.

Videos For installing this part.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

Looking at my dishwasher I only need the little white latch part that locks the door in place. Where can I find this part specifically, as I don’t need the whole assembly. Thanks in advanced!

Jane
Answer:

Hi Jane, unfortunately as per the manufacturer you will have to purchase this assembly WPW10130695 to fix the latch, as they are not sold separately. Please let us know if you have further questions!

17 people found this helpful.
Question:

So my door latch is hanging from my dishwasher. And I cant open the door bc its locked. I read that I can lift the door up and jerk it. Sounds easy enough. BUT will I break anything if I do this? I dont want to jerk it open if it breaks something else.

David
Answer:

Hi David, great question. You are right, the only way to open a jammed door would be to lift the door and with controlled movements to jerk it outwards. Before attempting this, we recommend checking the dishwasher to make sure it is properly mounted so that the jerking movement does not slide it out of place and hurt the dishwasher. Otherwise, by doing this you will not be at risk for breaking anything. Just be careful and give yourself some space. I hope this helps.

7 people found this helpful.
Question:

My handle broke off of my white dish washer and I don’t see this part in another color is this what I need to order? And do I need to order the whole assembly? Do they come separately? Also I have never replaced it does it come with instructions?

Jamie
Answer:

Hello Jamie. This is the correct assembly WPW10130695 for your white dishwasher, and it includes everything you need to replace the handle. To begin this repair, unplug your dishwasher or disconnect the power. You will want to remove the screws that are holding the inner door to remove the inner door panel. You will see wires leading to the old latch assembly, remove them and the assembly. Using the same steps but backwards you can connect the new assembly, put it back in place, and reattach the inner door panel. Good luck with this repair!

6 people found this helpful.
Question:

I am writing because "steve" at https://www.Youtube.Com/watch?V=u34a8cuwjzs says that part Whirlpool oem part #wpw10130695 may come with either some difficult tabs or without these difficult tabs. I am trying to find out if the part i will order will be with tabs or without tabs. The part number is Whirlpool oem part #wpw10130695 according to the search which i did by calling amana at 1 800 688 9900.. we have an amana dishwasher adb1500awb0. the second number (underneath this number) is nw4215458. thank you for your help.

Doris for model number Amana Dishwasher ADB1500AWB0
Answer:

Hi Doris, That is a good question. The door switch has 2 small tabs on each side that snap into the handle assembly. I hope this helps. Thank you and have a great day!

Question:

Will Whirlpool oem part #wpw10130695 work with an Amana dishwasher adb1500awb0? The second number (underneath this number) is nw4215458. Thank you for your help.

Doris for model number Amana Dishwasher adb1500awb0
Answer:

Hello Doris, thank you for contacting us. The correct part number for the door latch that fits your model is PS11751688. Good luck with the repair!

Question:

When i press the start button the delay wash timer comes up at 2 hours. It will not let me turn it off. Also the door latch handle is broken off. Could these be related?

Michael for model number mdb8600aww
Answer:

Hi Michael, Thank you for your inquiry. If it is just the handle that is broken off the latch, the latch should still be operational and it should not cause this issue. I would try unplugging the dishwasher and plugging it back in to see if this resets it. If this does not work, press the delay start pad until the hours of delay indicator goes off. For further information, you will need to check your owner's manual. I hope this helps. Thank you and have a great day!

Most Recent

Question:

I am looking for the latch assembly for my Maytag dishwasher in almond. Is this available?

Jim for model number MDBH965AWQ
Answer:

Hi Jim, Thank you for your question. This part only comes with a black handle unfortunately. Good luck with your repair.

Question:

Will this assembly fit my dishwasher

Douglas for model number MDBH980AWS
Answer:

Hi Douglas, Thank you for your question. Yes, this part is compatible with your model number. Good luck with your repair.

Question:

Hi, my dishwasher will not start. Replaced the whole latch assembly and continue to have the same problem. When I push the start button, the heated dry, wash/dry and normal light shows but very dim. The normal wash light never comes on, only dim when pushing the start button.

Tim for model number MDBH945AWW
Answer:

Hi Tim, Thank you for the question.It sounds like the Electronic Control Board needs to be replaced. This board controls the appliance and the lights. If the lights are dim and the appliance is not starting, chances are the board is not powering up properly and needs to be replaced. Hope this helps!

Question:

The only thing it does, is light up the rinse only button and the #9. None of the other buttons work.

Olivia for model number MDBH975AWB
Answer:

Hi Olivia, Thank you for your question. There are a couple of parts that could be causing that problem. You should check your door switches, the wiring of your appliance, your control board, and your touch pad. I hope that helps. Good luck with your repair.

Question:

My dishwasher panel still operates. I can select cycles, and the dishwasher will fill. If I press cancel, it will drain per usual. When I start the dishwasher the machine fills, but then something doesn't work as expected and the machine times out. When it times out there is no error code or blinking light. The whole control panel just goes dark.

John for model number MDB8600AWS
Answer:

Hi John, Thank you for the question.Sounds like the control board is not going through all of the proper cycles and needs to be replaced. If the door latch was the issue the dishwasher would not start to fill or start going through the cycles at all. Hope this helps!

Question:

My dishwasher will not run and the touch pad will not respond or light up. Before this happened none of the lights on the control pad would not work for the last year or so. The machine is getting power to the board and the other components. It is not making any noises like it is trying to start a cycle. From what I am reading the door latch is the most likely culprit, but it does not appear to have any physical damage and I tested the micro switches and they seem to have continuity when the button is pushed in. I am not sure how to test the motherboard or the control panel. Thanks for your help!

Todd for model number MDC4650AWW
Answer:

Hi Todd, Thank you for the question. Going by what you described it sounds like the board will need to be replaced. You should find your tech. data/wiring diagram, in a bag taped to the backside of the kickplate panel, it will give you the resistance readings and pin locations to test with a multi meter. Hope this helps!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 724 reviews What's this?
 

3 of 3 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Martin from Monroe, MI

Plastic handle broke, door would not latch shut

Turn off the DW power (pull the fuse or turn off the circuit breaker) Open the dishwasher door. Remove the torx screws around the periphery of the door inner panel. Lift up the inner panel far enough to get at the door latch. Lift out the entire door latch assembly. There are two wiring connectors attached to microswitches on the latch assemby. Remove the connectors. The connectors were pretty tight, so I needed pliers to pull the connectors off the switches. Discard the old latch. Get the new latch, and plug in the connectors (keep track of which wires go on which side). Lay the latch down in the door so it lines up with the mounting holes. Lay the cover back down, start each of the torx screws into their threaded holes, then tighten them all. Don't over tighten. Turn power back on. Job done. It almost takes as long to type it up as it does to make the repair.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: kevin from morgan, UT

Broken handle

Repair was fairly easy. There are 11 screws You have to remove then simply unplug the electrical connection from the door latch/switch and plug in the new one line up the screw holes tighten them down and your in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: daniel from mount airy, MD

Dishwasher handle had problems opening and closing

1) Turned off the power

2) I removed the screws on the plastic door.

3) The latch/handle assembly was right there.

4) I noticed that white and black wires fed each side. I noted which side did the black feed and the white feed.

5) I took a pair of pliers and held the white wire brackets and pulled the metal parts off. This is where the time took.

It took about 2 minutes per side.

6) I then slid the new metal parts in the white brackets.

7) I screwed it back.

8) Turned it back on!

9) Works great

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 3 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: Darryl from Edmonds, WA

Broken handle

First I removed the torx screws halding the inner door panel on. I then seperated the door panel from the door and removed the latch assembly and disconnected the switches from the latch. After installing the switches on the new latch I replaced it between door and inner panel. Finally I replaced the torx screws and was finished.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

5 of 9 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Screw drivers
Customer: Peter from BROKEN ARROW, OK

Broken door latch and poor glass washing

This repair was really three separate easy repairs.

The top rack docking station is really simple -- pop the old one off and snap the new one on.

The impeller is easy IF you have the right Torx screwdriver. You have to take a few layers of water handling plastic parts off to get the the impeller, but it's all pretty easy. I did strep a couple of Torx bits when I put one of the parts back on, but I've had this apart at least three times and they held up the first few times. I'll buy some new screws next time.

There are a few things to keep in mind when changing the door latch and control panel. First, change the latch as soon as it breaks, instead of waiting for it to break more and destroy the control panel in the meantime. I'd have save $60 and most of the work if I hadn't put it off. Second, turn off the power. Changing the panel requires removing and replacing some wires, and it would be EASY to contact wires that you probably don't want to. A nutdriver makes quick work of everything that the Torx doesn't fit, and the remove/replace is pretty easy. Be attentive when refitting the ribbon cable for the control panel - if you're not familiar with this kind of connector you need to figure out the funky slidelock mechanism of the shell. It's easy though.

All the parts fit perfectly, and appear to be factory exact replacements. It works fine now, too.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Robert from Pittsburg, PA

Broken latch on my dishwasher

1 - Unscrew the back of the dishwasher with a hex-type driver. The latch assembly will be resting inside the outer door assembly. Make sure power is turned off to the washer - there are a couple of "hot" wires that will attach to the latch assembly.

2 - Unplug the wires from the old latch and plug into new latch assembly.

3 - Place the latch assembly back in place and re-attach the two door pieces together.

4 - Turn power back on at the breaker.

5 - Load dishwasher with the stuff that's been sitting in your sink.

6 - Gloat to spouse/significant other that you just saved $100 by fixing it yourself.

Just a quick note of thanks for shipping the replacement handle for my Maytag dishwasher.  Service was superquick and I was able to save big bucks (no service call).  I called on Saturday evening and the part was here on Tuesday.  The young lady who helped me was awesome and a Pens fan to boot.  I seldom send these types of emails but my experience was worth sharing.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Mark from Plainview, NY

Broken latch

1. Turned of Power via circuit breaker
2. Opened Dishwasher
3. Removed back of door (11) hex screws with electric driver
4. Removed latch assembly
5. Pried contacts from switches
6. One switch was more difficult to pry loose than the other
7. You will probably need a plier
8. Switch or connector may break but latch assembly comes with switches, so you just need to be careful not to break the connectors
8 Plugged connectors into new switches on latch assembly
9. Replaced latch assembly
10. Replaced door with (11) hex screws - two top screws hold assembly in place
11. Turned on circuit breaker and tested machine
12. Finished

Comments: This latch assembly was better constructed than the original and I expect it to last the life of the machine. If one of the switches wasn't so difficult to pry loose, then the repair would have taken ten minutes less to repair. Well worth the effort. Repair time was probably 20-30 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Christine from Cupertino, CA

Door handle broke

After checking repair places who wanted $140-$200 to repair the handle (most of it labor and transportation of course) I checked this website and read the do it your self testimonials the first one being wendy from florida and figured if she could do it so could I. . . Wasn't quite as confident as her so found a handy person (charged me $30). It was a "piece of cake" -- remove the 11 screws (allen screwdriver), unclip the wires to the handle (pliers), clip in the new one, replace the screws. I could have done it myself. Took 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Maciej from Factoryville, PA

Broken door latch handle

I should have done this 2 years ago when the door latch had broken. I disconnected the power tot he dish washer then I took my electric drill and used a torx bit to remove all scres holding the front panel. This took about 2 minutes. After that i removed the door latch (poped right out as it was held by the torx screws). I disconnected the switches on the old latch and reconnectted them on the new latch in th esame manner. replaced the screws and was ready to go after reapplying power to the unit.

I did get the Left and the right basket parts - this was unnecessary as now i have two complete baskets. I reading some of the reviews which suggested that you need two parts BUT YOU JUST NEED ONE. BUY JUST ONE AS THEY ARE COMPLETE SETS. Good luck

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: John from Harleysville, PA

Broken latch handle and cracked control panel

I had two problems with the dishwasher. The latch handle was broken and a line crack developed on the control panel just above the handle area.

1. Ordered the Latch Handle (LATCH ASSY (BLACK) MA) (Series 10); Part # PS1559543 from PartSelect. (Maytag’s part number is 99003347). PS1559543 received from PartSelect includes the latch, latch handle, and two switches.
2. Disconnected power to dishwasher. (I put the washer on timer mode; the control panel lighted up; turned off power supply at the circuit breakers box; control panel light was off; confirming that power was cut).
3. Opened the door, removed the torx T-20 screws from the inner panel (I used a cordless drill and one of the star shaped screw tip from a cheap Craftmans screw tips set)
4. The inner panel slid down down enough to expose the latch assembly. Since the latch assembly was held in place by the two of the screws removed, it was now only attached to two sets of wires through the switches on both sides of the latch assembly.
5. The next thing to do was to connecting the wires to the new latch assembly. I chose to use the switches on the old latch assembly. There were plastic hooks holding them in place. The switches readily slid out by slightly push back the hooks. There is a little knob on the switch, and had to be pushed back to slide into the new latch assemble.
6. To fix the line crack, I used a toothpick to apply plastic glue on both sides of the crack. Then lined up the latch assembly with the control panel and the dishwasher’s inner internal panel, put back the two top middle two torx T-20 screw to hold them in place. Excess glue was wiped off with paper towel wet with isopropyl alcohol. This saved me the expense of ~$60 for a new control panel. Don’t use crazy glue, it will discolor the plastic.
7. Put back the screws at four corners, then the rest. I set the clutch of the cordless drill at 2 so that the screws were not over tightened.
8. Let the glue dried overnight. The crack was fixed, the latch assembly works like when the dishwasher was new.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 7 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Richard from Jacksonville, FL

Latch wouldn't function

I learned everything I know about the procedure from this site. but here it goes:

Turn off the power at the breaker! If you are like me, you will forget until you are trying to change out the wires and then ZZZTT! you will jump and say somehting your kids should not hear. (like I did).

After forgetting to turn off the power, I unscrewed torx-head screws (its a T-20 driver if you need to buy it --T is for torx and 20 is the size) around inside edge of door to remove the inside door panel. Take care when opening the panel because some wires are still attached to it.

Removed old latch assembly by unplugging it. Normally, the black and white wires would unclip from the assembly, but in my dishwasher, the "quick release" wire connectors going to the latch assembly were not coming apart. The wire connectors themselves were attached to two small switches on the latch body, so I just took the switches and wires off the latch assembly by gently prying the 2 retaining clips away from the switch and they come right off, with the wires still attached. I then removed the switches from the new latch assembly, so I could plug it in to the old wires/switches dangling from my dishwasher. Then I got a mild shock, and sent the kids out of the room.

I was pretty sure there was nothing wrong with those switches--it was pretty obvious that my problem was mechanical, but I saved them just in case. The latch handle itself had broken on one side. Also, upon opening the panel, I also discovered that the latch assembly was no longer securely attached to the control console--the tiny plastic mounts (about 1/16th of an inch wide) that held the latch assembly at the bottom were broken. Surprise surprise.

I took the advice of a poster here to use JB weld to secure the new latch assembly to the console where the flimsy plastic mounts had been. (instead of spending $80 for a new control panel just to get new flimsy mounts).

The latch assembly went right into the old spot. Use a hand driver or set your drill on a low clutch setting so as not to strip the screws going back in--remember, its plastic! The biggest investment here is time--unless you don't have the torx driver.

On a related note, this Maytag is only about 3 years old and already I have had 2 broken rollers on the upper rack and now the latch. I went to the hardware store and bought a couple of 99-cent cabinet knobs that were approximately the same size as the rollers I had to replace. I ground the knobs down to fit in the slide, and then screwed the knobs onto the rack. It took some machining, but it sure beats the $35 (each side!) for the replacement roller mechanism!

Have a great day and I hope this helps someone!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

3 of 4 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers
Customer: Joseph from Naples, ID

Latch handle broke, but lived with that one. Then touch panel began to fail until it would no longer work. I've repaired applinces before and knew repair was less expensive than replace a $450.00 dishwasher!

As many newer appliances are, component replacement can be very easy. Unplugged the unit since I was working directly with the main electrical control unit. Removed the torx screws to access the interior door. It was then simple replacement by removing set screws for the panel. Unplug the old panel and plug in and install the new one. Only problem I had was the Latch Handle was back ordered and took about a month to get, not PartsSelect.com's fault. Handle replacement took about 5 minutes when I got it.
Now dishwasher is as good as new and works perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Very Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Andrea from WINAMAC, IN

Handle broke

Super easy fix, watched the installation video, did the repair in about 15 min. Helpful site and will gladly return in the future if needed

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Easy
Time to do repair: 30 - 60 mins
Tools: Screw drivers
Customer: Jimmy from BAYTOWN, TX

Broken handle

Removed the interior of door to get to latch. Removed broken latch and unplugged the wire after I turned off electricity. Reinstalled the new latch and interior door and turned the electricity back on and everything worked great.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Door Handle and Latch Assembly with Switches
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Lawrence from NEW RICHMOND, WI

Broken door handle

removed inside door panel--then the wire leads--replaced broken part--reattached wire leads --reattached inside door panel--done----------------suggestion--it would be a good idea to include with the new part the screwdriver bit to fit the screws on the door panel ---many people would not have that size Good service from this site

Help other customers find the most helpful instructions.

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11748729
Manufacturer Part Number: WPW10130695
Brand Model Number Description
CrosleyCDU650AWBDishwasher
CrosleyCDU650AWWDishwasher
Jenn-AirJDB1050AWBDishwasher
Jenn-AirJDB1050AWQDishwasher
Jenn-AirJDB1050AWSDishwasher
Jenn-AirJDB1050AWWDishwasher
Jenn-AirJDB1060AWBDishwasher
Jenn-AirJDB1060AWQDishwasher
Jenn-AirJDB1060AWSDishwasher
Jenn-AirJDB1060AWWDishwasher
Jenn-AirJDB1080AWBDishwasher - Tall Tub
Jenn-AirJDB1080AWQDishwasher - Tall Tub
Jenn-AirJDB1080AWSDishwasher - Tall Tub
Jenn-AirJDB1080AWWDishwasher - Tall Tub
Jenn-AirJDB4000AWBDishwasher
Jenn-AirJDB4000AWQDishwasher
Jenn-AirJDB4000AWSDishwasher
Jenn-AirJDB4000AWWDishwasher
MaytagMDB4650AWBDishwasher
MaytagMDB4650AWSDishwasher
MaytagMDB4650AWWDishwasher
MaytagMDB4651AWBDishwasher
MaytagMDB4651AWQDishwasher
MaytagMDB4651AWSDishwasher
MaytagMDB4651AWWDishwasher
MaytagMDB5600AWBDishwasher
MaytagMDB5600AWQDishwasher
MaytagMDB5600AWSDishwasher
MaytagMDB5600AWWDishwasher
MaytagMDB5601AWBDishwasher