Damper, Control WPW10127427

Hi Janice, Thank you for the question. Soudns like you need a new Electronic Control Board. This electronic board manages and monitors the cooling and defrost times of your refrigerator and other functions. If your refrigerator is not cooling properly because the dispenser is flapping between open or closed positions, or there are problems with the display lights flashing, replacing your control board can be the solution. Hope this helps!

Hello, Thank you for your question. You will want to check into the damper control- PartSelect Number: PS11748673. We hope this helps.

Hello Billy, Thank you for the question. When the refrigerator temperature is too low cold air often settles at the bottom of the fridge in the Crisper. The temperature Control Board may need to be replaced. We hope this helps!

Hello Roland, Thank you for your inquiry. I would check first to make sure that the defrost drain system is not clogged or frozen. Check the drip pan to see if there is any water or ice in it. Make sure none of the tubes are cracked or leaking. Also check the water inlet valve and condenser fan motor. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!

Hello Jered, thank you for your question. You can check the damper to see if its opening by turning the controls to the coldest setting. If the unit comes on, and the compressor runs, but you can't feel any air coming through to the fridge section the damper isn't opening and should be replaced. Another good way to tell if the issue is the damper, is if the freezer is working fine, and you can hear the fan motor running but no air is coming through to the fridge. I hope this helps!