Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Vera D - January 31, 2022
Verified Purchase
Easy Repair
Part came promptly. Customer service provided video instructions for repair.
★★★★★
★★★★★
Ralph D - April 3, 2020
Verified Purchase
Replacing turbo wash manifold
The part came quickly and a website video took me seamlessly through the repairs; needed a to buy a tool to remove some mounting screws.
★★★★★
★★★★★
Lori H - June 24, 2019
Verified Purchase
Easy repair, just snapped in
Part arrived quickly. Replacement was easy and fixed the problem.
★★★★★
★★★★★
Tom H - June 17, 2019
Verified Purchase
Quick and easy
Easy to locate the part on the website and shipping was reasonable.
★★★★★
★★★★★
James E - December 14, 2018
Verified Purchase
easuy replcement of part
right part good just snaps in, in the rear of the washer came within a few days of placing order
★★★★★
★★★★★
Brad K - April 9, 2018
Verified Purchase
Manifole
great part, shipped fast
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dave
August 3, 2018
How do i disengage the power scrub nozzle from the water supply tube in order to move the water supply tube one quarter turn to the right to access the the screw that is hidden under it? This was purchased in 2018.
For model number KUDSO3FTBL3
Hello Dave, Thank you for the question. The Nozzle just snaps in place. You should be able to pull it off. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Veronica
October 21, 2021
this piece came loose how do i reconnect it
For model number w10077600
Hello Veronica, thank you for your question. Unplug your dishwasher or turn off the breaker. Take out the lower rack and place the turbo manifold over the fittings. Push it down over the fittings and then back against the water supply tube. It will snap into place. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Rich
August 14, 2017
After the dishwasher died, I replaced the circulation pump/motor(parts/select) and the pro-scrub manifold(parts/select). Then the bottom section spray arm worked great. But the middle spray arm wouldn't even move nor did the top spray disk work.
For model number KUDS30IVWH3
Hi Rich,
Thank you for your inquiry. It sounds like you might want to check for blockage in the main water tube that goes up the back of your dishwasher. Because this tube will bring the water to the middle spray are and the upper. None of these parts are electrical, so there is something physically happening with your parts. Good luck with your repair.
If I don't use the pro scrub function, do I need the blue manifold part?
For model number KUDS30IVWH3
Hi Bob, Thank you for the question. To ensure proper water flow the Manifold will still be required. Hope this helps!
Was this helpful?
Thank you for voting!
Janine
23 days ago
My dishes aren't coming out clean - I have bits of food and greasy residue on dishes on both the top and lower rack. I noticed that the bottom of the Turbo Wash Manifold at the back of the dishwasher is disintegrating and there are large holes in it where the water at the bottom of the dishwasher would be touching it during a cycle. Could this affect the water pressure and causing my dishes to not be cleaned?
For model number KUDS30IVBT3
Hi Janine, thank you for the question. Before replacing the turbo wash manifold, we would suggest checking the spray arms for any damage first. If they are fine, the issue could be with the circulation pump, part number PS11750859. It delivers water to the spray arms to clean your dishes. You may need to replace it to fix the issue. We hope this sorts out your problem!
