Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
Whirlpool, Maytag, KitchenAid, Amana.
Part# WP9755770 replaces these:
AP6013936, 9755770, W10308474
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Sandra W - December 8, 2021
Verified Purchase
Worked great
It was delivered quickly. My son installed it for me and now my oven is working well again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Hidden bake element, oven doesn't maintain hear
To access the hidden bake element you have to remove the warmer drawer and the left side panel (your left from the back of the oven). To remove the side panel you need to access 3 screws under the side of the glass top, to lift the glass top open the oven door and remove 2 screws from the bottom side of the glass top. Once the drawer and
... Read moreside panel are removed you can use a flat head screwdriver to pry out the false bottom on the front side of the oven and remove 2 more screws on the side so it drops down. Move the insulation out of the way and relase the element tray by prying out 2 tabs on the front side. Unplug the connectors from the element terminals and remove the bolt holding the element. Fold the side of the element tray down to remove the element. Reverse order to install.
Read less
EVERETT from BARTOW, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
17 of 23 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Heats up very slow
Unplugged the range, remove back electrical cover and component cover. Unscrewed old temp sensor and replaced it with new. Oven heats quicker (just by indication) since the probe is only a sensor..
Carl from GAHANNA, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
13 of 41 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
17 questions answered by our experts.
Sort by:
< Prev
1
2
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Bob
February 10, 2020
I’ve repaired many stoves, but this is the first unit i’ve found that has a bake selection but no baking element. No wiring on the back nor ports for the element to go into in the inside of the oven. The thermometer i placed inside registers less than half of the desired temperature selected. I’ve replaced the bad thermostat, but the oven will still not reach the desired temperature. The model says there should be a lower bake element, but there was never one installed to begin with. What should i do?
For model number WFE374LVS0
Hello Bob,
Thank you for your question. To access the bake element for your model WFE374LVS0, you will have to access the back of the stove to gain access to the hidden back panel where your bake element would be located. We hope this helps.
4 people found this helpful.
Was this helpful?
Thank you for voting!
Brian
December 27, 2021
how do i get access to the hidden baking element on KitchenAid model YKERA205PS4?
For model number YKERA205PS4
Hello Brian, Thank you for your inquiry. There should be two screws at the back of the bottom oven panel above the element that you can take out to remove the panel and access the element. We have included a link to our repair video for a similar element to give you a general idea of how to take the panel out. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cathy
December 14, 2017
I tried to heat up the oven and a spark came from the oven and all of a sudden the lower part of the oven will not heat. The broiler works. Does this mean its the lower element or the sensor? I did have a plastic drip catcher directly on the bottom so maybe that is what sparked it. Please advise what part i might need to fis my oven. Christmas is coming! Thanks.
For model number WFE515S0ES
Hi Cathy, Thank you for the question. If it is just the bottom element that is not working, you will need to replace just the element its self. It can spark when it becomes defective and burns out. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
May 7, 2018
How does the old bake element come out on this model which is hidden?
For model number GR563LXSB1
Hi John, Thank you for the question. You will need to remove the appliance from the wall and locate the panel on the back to expose and remove the hidden back element. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
May 8, 2018
Oven not heating. If you set oven at 400 it only heats up to about 100 is that the sensor or bake element. Thank you.
For model number GR563LXSB1
Hi John, Thank you for the question. This normally indicates an issue with the Oven Sensor. Testing the temperature sensor probe on your oven is easy. With the sensor at room temperature, measure the resistance between the two prongs at the end of the sensor connector. The resistance of the sensor should read approximately 1080 – 1090 ohms at room temperature. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Morris
December 7, 2023
Is there a hidden element on this model? I only see one at the top. Range isn’t heating properly so thinking I need to replace the element after already replacing the oven sensor probe. Thanks in advance!
For model number Whirlpool GR448LXPS2
Hi Morris,, thank you for writing in. Our research has found that there are two elements in your model. Part number PS11747198 is the top Broil element and part number PS11747168 is the bottom Bake element, there are no hidden element's in your mo0del. We hope this helps.
I need to replace the bake element. How do i access the bake element. I believe the part number is wp9755770
For model number WFE366LVS0
Hello, Thank you for your question. The bake element may be under the bottom panel, if that is the case you will need to remove the panel screws and remove that and that will give you access to the element. The element you need is; Manufacturer Part Number WP9755770. We hope this helps.
Was this helpful?
Thank you for voting!
Harvey
October 26, 2021
Do you have a video to install part # WP9755770
For model number YWFE530C0AS0
Hello Harvey, Thank you for the question. Very sorry, we do not have a video for this element, however we were able to locate another How to Video that may help. Good luck with the repair! https://www.youtube.com/watch?v=k4Sh87YQu0o
Was this helpful?
Thank you for voting!
Ken
November 21, 2017
Does these model have two burner coils in the oven
For model number MER6600FZ0
Hi Ken,
Thank you for your question. Yes. There is your bake element at the bottom and the broil element on the top. I have listed the broil element down below for you. Good luck with your repair.
When i heat my oven up to cook it will randomly shut off and will not allow me to turn it back on to cook for at least 30 minutes if not longer. Is this my baking heating element or something else?
For model number GFE471LVS0
Hi Christopher, thank you for your question. There are a few parts that could cause this issue in your appliance. First I would say test your elements with a multi meter to see if they are working correctly or not. They should be reading between 0 - 50 ohms to be working correctly. The other part you should check would be your oven temperature sensor. That can also be tested with a multi meter and should be reading between 1000 - 1100 ohms. If those three parts are fine however, then the issue may be in your control board. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
