This heating element is found under the base of the oven.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Little to no heat when baking | Element will not heat | Oven not heating evenly
This part works with the following products:
Range.
This part works with the following products:
KitchenAid, Whirlpool, Inglis.
Part# WP9752294 replaces these:
AP6013899, 9752294, 9752294A
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
5.0
Filter By Rating:
5 Stars
2
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert S - November 23, 2018
Verified Purchase
Medium difficulty repair.
So thankful for your helpfull website entry describing how this part is accessed by removing the right side panel, NOT from below as seems indicated by the diagrams. The element works great!
★★★★★
★★★★★
Steve L - February 27, 2018
Verified Purchase
Relatively easy. For sure a DIY project
Part arrived very quickly. Was the correct one and instructions on your website were clear and accurate. Will use and recommend you readily. We
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.2 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Replace element bake
Had to remove side panel then very easy
Chuck from DELANSON, NY
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven not heating
Before you begin,some notes:
1. The wiring diagram on the rear of the oven incorrectly shows a bi-metal element in the L2 side of the oven heating element circuit. There is no bi-metal element in the circuit. 2. There is a fast blow 20 Amp fuse with radial leads in the L2 side of the oven heating element circuit which is N
... Read moreOT shown on the oven wiring diagram on the rear of the oven. If you have a malfunctioning heating element this fuse is probably blown and you will need to replace it by removing the rear panel from the oven. The fuse is located toward the bottom, is shrink-wrapped and contained within a wire bundle. 3. The wiring diagram in the manual shows neither the fuse or the bi-metal element.
To replace the lower heating element (aka the hidden element) Disconnect power to the oven. Remove oven from it's location to gain access to the right side panel. Remove three screws holding the right side panel in place and remove panel Disconnect both wires connected to the element terminals. Carefully pull back fiberglass insulation to reveal element holding bracket. Remove one screw holding the element bracket in place and remove both element and bracket.
Installation is the reverse of these steps but make sure you replace the fiberglass insulation correctly or you will experience problems with heat transfer and a possible hot-spot on the side of the oven.
The quality of this KitchenAid oven is very bad. The parts are cheap and not well finished. No thought has been given to serviceability and the product's documentation is defective. The entire device has been designed for low-cost production and not for reliability or longevity. It is easy to see this when you study the documents and take the device apart. The morel of the story is: don't spend extra money on a KitchenAid oven because a less expensive brand will probably be of equal or better quality of design and/or parts quality. Access to the lower heating element could easily have been designed for front or rear removal. A service technician would charge around $250-$300 to perform this repair including parts.
Read less
Neil from Flemington, NJ
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
151 of 176 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Hidden bake element burned out.
This heating element is accessed from the right side of the range. The parts drawings are misleading, making you think that it can be accessed from below -- not so!
Remove the right side panel from the range by removing screws on back edge, and bottom center on the inside. Slide the panel forward to release from tabs on the fro
... Read morent edge, then pull out and off.
Separate the insulation that hides the terminals and access cover for the element., then remove one screw at the rear edge of this panel, and slide it toward the rear, then pull out.
Before disassembling the side, you can check to verify that the element is burned out by removing the rear panel and doing a continuity check on the wires leading to this element from the rear of the range. The wires on my range were a salmon or pink color with high temperature insulation.
Read less
Robert from Powell, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
228 of 258 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jimmy
November 14, 2017
How do you remove hidden bake element?
For model number KERC607HBT5
Hi Jimmy,
Thank you for your inquiry. Here is some information from our website that a customer left on how they installed the part, "This heating element is accessed from the right side of the range. The parts drawings are misleading, making you think that it can be accessed from below -- not so!
Remove the right side panel from the range by removing screws on back edge, and bottom center on the inside. Slide the panel forward to release from tabs on the front edge, then pull out and off.
Separate the insulation that hides the terminals and access cover for the element., then remove one screw at the rear edge of this panel, and slide it toward the rear, then pull out.
Before disassembling the side, you can check to verify that the element is burned out by removing the rear panel and doing a continuity check on the wires leading to this element from the rear of the range. The wires on my range were a salmon or pink color with high temperature insulation." I hope this helps. Thank you and have a great day!
25 people found this helpful.
Was this helpful?
Thank you for voting!
John
December 8, 2019
What is the part number for the oven bake element thermal fuse? Would like to test this before replacing the element.
For model number ykerc507ht4
Hello John,
Thank you for your question. The thermal fuse, or the safety sensor, for your model is under part PS11747430. Hope this helps!
The oven will not heat, yet broil and self-cleaning both work. I ran the self-cleaner and now can't bake. I have read many places that the thermal fuse doesn't reset itself after cleaning and this is common with this model. I would like to order whatever part it is. Thank you in advance for your assistance
For model number KESC307HBL8
Hi Kim,
Thank you for your question. There is a thermal fuse listed under your model number. The part number listed under your model number for the thermal fuse is PS11741729. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Richard
December 28, 2019
What is the part number of the hidden oven element?
For model number YKESC307HW4
Hello Richard and thank you for writing.
Oven element part number: PS11747129 is in the list of compatible items for your model. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
