Drum Drive Belt WP8547157 | Official Whirlpool Part | Fast Shipping | PartSelect
https://partselectcom.azureedge.net/Schematics/Whirlpool/52W5RKDC.gif

Drum Drive Belt

Product Description

Drum Drive Belt Specifications

This part is used to rotate the drum.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting

This part fixes the following symptoms:

Noisy | Will not tumble | Will Not Start

This part works with the following products:

Dryer.

This part works with the following brands:

Whirlpool, Kenmore.

Part # WP8547157 replaces these:

8547157.
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Judi
November 17, 2017
What is the size of this belt? Is this what i would need if tumbler stopped turning? If not what do you think i need?
For model number WP8547157
Hi Judi, Thank you for your question. This part is approximately 95" long. The manufacturer does not give us exact specifications so we can only give you an approximate length. It could be the part that you need. I would suggest checking it to see if it has worn down. I hope that helps. Good luck with your repair.

6 people found this helpful.

Was this helpful?
Paul
December 21, 2017
I replaced the idler arm and can't remember how the drum belt goes back on (over or under) the idle arm. Is there a schematic diagram online that illustrates the belt installation? If so, where can i find it? Thanks
For model number MEDB200VQ1
Hi Paul, Thank you for your question. Unfortunately we do not have any installation instructions specifically for this part however I believe this video will show you how that part is installed back on to your pulley: https://youtu.be/LxooXQCin8Y . I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Louis
September 25, 2019
This belt is way to tight. Is there an alternate. Runs against pulley and motor shaft.
For model number 11067082600
Hi Louis, thank you for your question. There is only this belt listed underneath your model as compatible. Belts are supposed to be tight at first because over time they loose that tightness and need to be replaced. Good luck with your repair.

Was this helpful?
Freda
January 13, 2018
I need a belt for a Whirlpool cabrio it takes a 95.19 do you have them
For model number Wed7300xwo
Hello Freda, Thank you for your inquiry. The part number for this model that measures 95.19 is WP8547157. Hope this helps!

Was this helpful?
Robin
February 26, 2018
I took apart the back of my dryer. Because it suddenly stopped drying my cloths from the morning i put them in i checked after work they were wet. I went to put back on. But nothing except a power light the time i added , once i hit start it would click. I thought maybe it was a thermister. So i ordered the part. Taking apart the back of the dryer i found a belt . I think it's a drum belt. Very long no part on it. But don't want to order it. If it isn't the piece. And now not knowing does it go on any pulley of any sort. Also found a hard plastic ring washer. Help!! thank you
For model number WED7600XW0
Hello Robin, thank you for your question. The dryer drum belt would only have to be replaced if it is broken. If the unit will not turn on, the motor does not run you will want to start your diagnosis by checking the door switch part number WPW10201785 which is located behind the front panel, and is activated when the door is closed. You will also want to check the motor belt WPW10411937 which is located around the motor area. If these parts are functioning correctly, the electronic control board might be the issue. I hope this helps!

Was this helpful?
Customer Repair Stories
Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Bob from CHULA VISTA, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WPW10512946, WPW10314173, WP8577274, WP8547157, WP3387223
Dryer would run 1 min then stop running with some heat in drum
Videos are excellent to open and access internal parts. It turned out a rat was killed in the blower fan when we first encountered the problem. This prevented the blower from turning which interfered with motor function.

This required removing drum & belt, disconnecting motor clips, blower belt, and blower housing. The blower housing needed to be disassembled. Having a 5/16” & 1/8” ratcheting nut driver makes this process much easier. Don’t try this with a wrench.

After getting rid of the rat and decomposition, we sanitized the entire housing with soap & chlorine bleach.

Reassembly was uneventful and relatively easy. We ended up replacing 4 rollers, 2 belts (drum belt & blower belt), the thermistor which was damaged as a result of the blocked blower.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
ROGER from MADISON, TN
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Parts Used:
WPW10547292, WP8547157
Broken dryer belt and broken idler pulley wheel
Looked it up on YouTube and followed the video instructions. Repair went fine after I got the correct parts ordered from two different places before I got the correct parts. Parts Select was the only one that sent the correct parts.
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
4 Reviews
5
out of 5
Filter By Rating:
  • 5 Stars
    4
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
5
-
Verified Purchase
No Smell Belts

I ordered a new drum belt from some un-named web site and saved 30 bucks on the new belts. The smelled like a skunk when the dryer was running. All the clothes smelled like a skunk. I then ordered your belts and got what I paid for without the smell. Being the second time in two weeks, the install was a breeze. The belt arrived a day earlier than originally thought. Thank you for the OE belts. As the saying goes, "You get what you pay for."

5
-
Verified Purchase
Easy repair

Part fit perfectly Drier was up in running the same day

5
-
Verified Purchase
Fit perfectly

Fast delivery and fit perfectly on a Kenmore Elite Oasis.

5
-
Verified Purchase
Easy repair

Part fit perfectly. Fixed my Kenmore dryer

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11746374
Manufacturer Part Number: WP8547157
Brand
Model Number
Description
Kenmore
11067032600
Dryer
Kenmore
11067032601
Dryer
Kenmore
11067042600
Dryer
Kenmore
11067042601
Dryer
Kenmore
11067052600
Dryer
Kenmore
11067062600
Dryer
Kenmore
11067072600
Dryer
Kenmore
11067082600
Dryer
Kenmore
11067086600
Dryer
Kenmore
11067087600
Dryer
Kenmore
11067092600
Dryer
Kenmore
11068062800
Dryer
Kenmore
11068062801
Dryer
Kenmore
11068072800
Dryer
Kenmore
11068072801
Dryer
Kenmore
11068082700
Dryer
Kenmore
11068082701
Dryer
Kenmore
11068087701
Dryer
Kenmore
11068092700
Dryer
Kenmore
11068092701
Dryer
Kenmore
11068097701
Dryer
Kenmore
11068102310
Dryer - 27" ELECTRIC DRYER
Kenmore
11068103310
Dryer - ELECTRIC DRYER
Kenmore
11077032600
Dryer
Kenmore
11077032601
Dryer
Kenmore
11077042600
Dryer
Kenmore
11077042601
Dryer
Kenmore
11077052600
Dryer
Kenmore
11077062600
Dryer
Kenmore
11077072600
Dryer

All brand logos are trademarks of their respective owners.

The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.

Copyright © 1999-2019, Eldis Group Partnership. All rights reserved.