Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Robert
January 9, 2019
During the spin cycle, I hear a bearing which has become so loud that while watching tv you can't hear , sounds like it's going to blow apart. I know that it's a bearing but on your diagram I can't find it. I need to find out all the required parts to repair this machine. My dryer, model # wed8200yw0, it's also very loud. It sounds like a bad hub bearing on a car. Thanks. Bob
For model number WTW8200YW0
Hello Robert, Thank you for the question. The Bearing is only sold as part of the Outer Tub Assembly, PartSelect Number PS3503107. The Bearing is not sold on its own. I looked up the part and it is listed as No Longer Available/Discontinued. There is no part substitutions listed. My suggestion here would be to call the manufacturer and see if they can provide you with a substitution for these part numbers. Hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Shanna
February 8, 2024
Hello there. My washing machine was leaking for awhile and then it suddenly stopped agitating and spinning. It made a low quiet pulsing noise when it was supposed to be agitating and spinning. I was replacing the motor stator assembly and I noticed that there's one part that has a gear like shaft with bearings that is completely shot. It is extremely rusted and needs to be replaced. It's part number 22 that is no longer available. My question is what part number is this? And what is the part called? Please help. Thanks.
For model number WTW8240YW0
Hello Shanna, thank you for reaching out to PartSelect. According to our research, the part you are referring to is the tub seal and bearing kit, part number PS3503261. You may need to replace it to fix the issue. Glad to be of assistance!
What tools do i need for this? The video i watched said i would get the tool with it
For model number PS11746371
Hello Natalie, Thank you for your inquiry. You should just need a Phillips screwdriver to remove the screws holding the hinge to the lid, then a flat head screw driver to push the hinge out. Lift the lid up and pull it out to access the bearing. Use a small flat head screw driver to release the tabs and pop it out. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
