Quick Question!

Have you ever purchased from PartSelect.com before?

11745050-1-S-Whirlpool-WP8182862-Water Inlet Valve
11745050-1-S-Whirlpool-WP8182862-Water Inlet Valve 11745050-2-S-Whirlpool-WP8182862-Water Inlet Valve 11745050-3-S-Whirlpool-WP8182862-Water Inlet Valve https://www.partselect.com/Schematics/Maytag/YQTCDHMB.gif

Water Inlet Valve

Your Price

$51.76
Order within the next 4 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11745050
Manufacturer Part Number WP8182862
Manufactured by Whirlpool

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This part works with the following brands: Whirlpool, Kenmore, Maytag, KitchenAid.

This part works with the following products: Washer.

This part fixes the following symptoms:

  • Will not stop filling with water.
  • Leaking.
  • Will not fill with water.
  • No hot or cold water.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Recent

Question:

I get a f20 error code every once in a while.Approx once ever 4 days.Could this be a intermittent flow meter? This usually happens when its due to pump out,but not allways.

Ken Brandt for model number WFW 9400sw01
Answer:

Hi Ken, Thank you for your inquiry. The F20 error code is letting you know that there is a water supply issue. To resolve this issue press pause/cancel 2 times. If this does not help unplug the washer from the electrical outlet for 2 minutes and plug it back in. Try a wash cycle and if the F20 error code appears again you will need to open both the hot and cold water valves all the way to see if this fixes the issue. Also make certain the hoses are connected correctly and that there are no obstructions in them. Also clean the filters on the water inlet valve. If you have tried all this and it does not help you may need to replace the water inlet valve. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 7 reviews What's this?
1-7 of 7
 

67 of 73 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Pliers, Screw drivers
Customer: Jerry from Keenes, IL

Washing machine giving f20 error code

removed washer top, checked supply hoses and inlet valve to make sure not clogged, replaced valve and while already there replaced flowmeter, reinstall top and hoses and checked machine operation, machine working fine and wife thinks i am her hero

Help other customers find the most helpful instructions.

Were these instructions helpful?   

54 of 68 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: robert from Covina, CA

Water was slowly leaking into the washer drum

lickity split

Help other customers find the most helpful instructions.

Were these instructions helpful?   

31 of 39 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers, Wrench (Adjustable)
Customer: Pepin from Waltham, MA

Fh error code during wash

Ran diagnostics for this model (you can look for its service manual on the web which details how to do this). The diagnostics said the cold water inlet valve or the flow-meter were broken. To pin the issue down to one component, I switched the cold/hot water control cables going into the inlet valve assembly and switched the cold/hot water hoses. Ran diagnostics again and the cold water and flow meter passed but got a failure on the hot water inlet valve. This pointed to a bad cold-water inlet valve. I ordered a replacement at PartsSelect. Installation took less than ten minutes. Machine runs like a dream. Before all this I called a service center, and without even looking at the machine, they quoted no less than $300. But with a little reading and some sleuth work, I ended up paying only $70 for the part + S/H.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 16 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Screw drivers
Customer: Nicholas from Boothwyn, PA

Error f28 in mid cycle

check error code : no water flow
pulled hoses [hot& cold] to clean screen in line.
pulled flow meter out from under top of hood to clean and check free wheel movement inside.
still error code F28 in mid wash cycle. called in and talk with service: he explained that hot& cold water valve was opening to slow or not enough for flow meter to read full presure. I replace water valve and flow meter. washer is doing fine. [I was getting readly to go in futher down the line and get new controler. talking to service stop me from spending a lot of money. THANK YOU

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 4 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver, Pliers
Customer: Robert from PALM BCH GDNS, FL

Water leaking into drum when machine shut off

Shut off water. Unplug electric. Remove top panel. Unhook hoses. Unhook tubing unplug solenoid. Use torx to remove part. Reverse steps to install new part. Replace top panel. Hook up water & electric.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Very Easy
Time to do repair: Less than 15 mins
Tools: Pliers, Screw drivers
Customer: Wanda from PIKEVILLE, KY

Tub was filling with water while washer was not in use

Shut off water supply, unplug washer. Remove screws on fir the top of washer, remove supply lines for water, lift top of washer off, unclip wires going into outlet value, reclip wires into new part, put parts back into place, secure lid and hoses, turned water supple back on plug in washer and put washer back into place, there you go. Oh, one more thing, make sure you check for leaks prior to hut washer back into place. Easy as pie

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • Water Inlet Valve
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Don from Oceana, WV

Water filling up in drum when not in use

Took top off with nut driver, disconnected 2 wires , removed one screw holding inlet value. Then I reversed the procedure putting new one on. Maybe 20 min. Of course unplug power and turn off water supplies before starting the job.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-7 of 7

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11745050
Manufacturer Part Number: WP8182862
Brand Model Number Description
Kenmore11045081404Washer
Kenmore11045087404Washer
Kenmore11045088404Washer
Kenmore11045089404Washer
Kenmore11045091404Washer
Kenmore11045862404Washer
Kenmore11045872404Washer
Kenmore11045962404Washer
Kenmore11045966404Washer
Kenmore11045972404Washer
Kenmore11045976404Washer
Kenmore11045986404Washer
Kenmore11045996404Washer
Kenmore11047081600Washer
Kenmore11047081601Washer
Kenmore11047081602Washer
Kenmore11047086600Washer
Kenmore11047086601Washer
Kenmore11047086602Washer
Kenmore11047087600Washer
Kenmore11047087601Washer
Kenmore11047087602Washer
Kenmore11047088600Washer
Kenmore11047088601Washer
Kenmore11047088602Washer
Kenmore11047089600Washer
Kenmore11047089601Washer
Kenmore11047089602Washer
Kenmore11047091600Washer
Kenmore11047091601Washer