Your coupon for will be reflected when you check out!
✖
Your coupon for
✖
Hello!
You're visiting the PartSelect site in U.S.
Would you like to shop on the Canadian site?
Stay on this site
Go to Canadian site
✖
Model Number Locations
1Select Category Type
Select Category Type
2Select Product Type
Select Product Type
3Select {MODEL} Type
Select {MODEL} Type
Sample Model Number Tags
Model numbers can be made up of numbers (1005400, for example) or a combination of letters and numbers (LAT1000AAE). The model number will most likely appear on either a paper sticker or a metal plate. Your appliance's model number tag may look similar to the sample model number tags shown here (model number highlighted in yellow):
OEM stands for Original Equipment Manufacturer. Simply put, this means that the company who made your appliance is also supplying the replacement part for it.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Dennis R - February 25, 2022
Verified Purchase
Pilot Light
Ordering was easy. The part arrived on time and works very well
★★★★★
★★★★★
Connie H - February 9, 2021
Verified Purchase
Easy repair, exact part.
Thermocouple went right in and my oven works like it should
★★★★★
★★★★★
Richard C - March 23, 2018
Verified Purchase
Thermocoupler
Fit exactly right & 1/2 the price of oem....
★★★★★
★★★★★
David W - March 21, 2019
Verified Purchase
Pilot
worked great - easy install
★★★★★
★★★★★
Scott O - June 27, 2018
Verified Purchase
The part I needed, esay install, prompt shipping!
Great to receive what I ordered so quickly! Great price, prompt service.
★★★★★
★★★★★
JOHN/JM146214 M - May 15, 2019
Verified Purchase
NICE
WORKED
★★★★★
★★★★★
James R - July 10, 2019
Verified Purchase
great
Part worked great, thanks
★★★★★
★★★★★
Tom P - December 26, 2018
Verified Purchase
pilot
all went well stove is working again thanks
★★★★★
★★★★★
Mark G - February 5, 2019
Verified Purchase
Easy repair!
Part fit perfectly. Easy installation.
★★★★★
★★★★★
Robert A. H - October 16, 2023
Verified Purchase
Good Job
Right lenth, worked like a charm
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.7 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pilot would not light or stay on
Replaced the pilot and tubing, this is a RV stove and oven. The easiest way to replace it was to pull the stove slightly away from the wall as the tubing had a securing strap to the back stove wall which had to be removed to get the pilot tubing removed and the new put in. That was the most time consuming. Anyone with some handyman capabi
... Read morelity can do this job quite easily. If you use part of the old end of the tube connection at the pilot as I did make sure that you insert the new small pin hole restricter (my term).
Read less
Richard from Yuma, AZ
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
6 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven pilot would not stay lit
I removed the stove top over the burners. Then I Opened the oven door and removed the shelf and then the bottom tray. It had to be pushed back against springs and lifted up. If it does not lift, hit the front of the tray in an upward motion with the heal of your hand. The lets you access the oven burner area. I removed the wingnut from th
... Read moree metal deflector over the burner and removed it. Now you have access to the pilot assembly. remove two acrews ans save them. Go back to the top and with a wrench, remove the caps that hold the tubes to the oven valve. Be sure the gas is turned off at the propane tank, now remove the main gas line from the stove valve system. Now remove the four screws along the sides of the oven top. This will allow the oven to slide out enough to reach the back where a plastic clamp is holding the two tubes attached to the pilot. These will need to be pulled toward the back of the stove as you pull the pilot assemble out the from of the oven. Once you have worked the old pilot assembly out, install the new one in reverse order. Reconnect all the tubing nice and snug, after pushing the oven back into place. After you get everything back together, before you light up, use leak detector fluid to be sure you don't have a gas leak. Before you even order parts though, you should try to adjust the pilot flame if it is very small. It should be at least 1/4" high. 1/8" is not enough to heat the thermocupler. I had to drill a hole thru the front of the stove in the location of the pilot adjustment because Magic Chef drilled the hole in the wrong place. I ended up doing this after the new pilot assembly did not correct the problem. David Calif.
Read less
David from Lincoln, CA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers, Wrench (Adjustable)
9 of 13 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
pilot light would not stay on after releasing the "pilot lite" light knob
First I turned off the propane tanks.
I then removed the two stove racks on the top of the stove and removed the metal cover surrounding the burner elements.
Next I detached the gas line and quickly inserted the temporary plug (supplied with stove) to stop the left over gas from entering the camper.
I the
... Read moren removed the two lower screws at the base of the stove just below the oven door and the two screws at the top rear of the stove securing the stove .
I now removed the stove.
Next I detached the pilot element from inside the oven and from the opposite end at the top of the stove at the burner area.
Now I replaced the element with the new one and replaced the stove all in the reverse order.
Read less
john from aiken, SC
Difficulty Level:
Easy
Total Repair Time:
More than 2 hours
Tools:
Screw drivers, Socket set, Wrench set
7 of 10 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
December 7, 2018
Will this work on my Maytag recreational vehicle oven?
For model number CLY2220BDB
Hello Tom, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11744570. Thank you for your inquiry, good luck with this repair!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Suzan
December 11, 2017
Thermocouple, I need to know if it is at least 40” long. The old one is that length, nothing shorter will work on our rv range
For model number aly2280bdb
Hi Suzan, Thank you for the question. Very Sorry, but the manufacturer does not provide us the length of the tube on this Pilot. I can verify this Pilot is the correct part for the model number provided. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Lawrence
February 27, 2018
Needs to be 40 inches long . Will this fit my need.
For model number CLY2220BDB
Hi Lawrence, Thank you for the question. We do not have access to the length sorry, but I can verify this is the correct Pilot for the model number provided and it will fit. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Barry
December 10, 2018
I ordered this part, but the thermocouple is too short. I need approximately 42" length. Can you help me out?
For model number ALY2280BDS
Hello Barry, Thank you for the question. The PartSelect Number: PS11744570 is the only thermocouple listed for the model number provided. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bob
July 18, 2023
Oven pilot will not stay on after several tries.
For model number Cly2260bdb
Hello Bob, thank you for the question. Based on the description you have provided, we would recommend checking the thermocouple, part number PS11744570, to fix the issue. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Brandon
September 16, 2017
My stove pilot won't light, and takes forever to try and light. I push the knob to pilot and it doesn't want to light, and when i turn past pilot to any temperature, no gas wants to flow out until about 5 minutes of doing that. Could it be the mechanism behind the knob? Can't seem to find a name for it.
For model number CLY2220BDB
Hi Brandon,
Thank you for your question. You may have to check your ignitor to see if it is still working. I hope this helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
