Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert B - May 12, 2020
Verified Purchase
Easy Repair
The fan speed control switch was delivered on the date promised - even during Covid-19! Nice going. The installation required remove of the four burner assembly and the sheet metal shields protecting the electric control components. The entire repair took less that 30 min, which included reviewing online directions.
Thanks for your help
Bob B
★★★★★
★★★★★
Ken H - July 25, 2018
Verified Purchase
Cook top switch
Worked very nice. Fast shipping
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richard
January 15, 2018
Looking for the burner control knob assembly. Is this part the correct one for my model cooktop? Diagram shows part number cross reference part number wp4456836 replaces: 4456836. Please advise.
For model number jgd3536bs00
Hello Richard, Thank you for your inquiry. This part is the switch that goes behind the knob. For the knob itself, part W10559477 is the white knob, W10559476 is the black knob, and part#
WPW10559475 is the stainless steel knob. If you need the grommet/bezel that the knob fits into as well, part# W10559485 is white, part# W10559486 is black, and part# WPW10559494 is stainless steel. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ed
February 20, 2019
The control know will not turn. Will this part solve the problem?
For model number jgd3430ws00
Hello Ed, Thank you for contacting us. It could either be a broken knob or the knob has stripped from the control switch shaft. This will require further inspection on your end. If you do find out which part you need, we welcome you to submit a follow up question and we would be happy to locate the correct part for you. Thank you.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bobby
July 29, 2021
Looking for the switch for the exhaust blower.
For model number KECD807XBL00
Hello Bobby, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11742668. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Allen
October 30, 2023
Fan switch is broken. Do I have to take cooktop out to replace switch. Fan runs but will not regulate or shut off. Video? Have to take burner plates out?
For model number Jgd3536ww01
Hello Allen, thank you for reaching out. We are providing you with the instructions that will help you in replacing the fan switch.
1- Remove the grates from the cooktop.
2- Remove the burner cap and burner bases.
3- Remove all the knobs using sting.
4- Now lift up the appliance and use two pieces of wood to support the appliance above the countertop.
5- Now unthread all the screws securing the orifice holder to the maintop.
6- After removing the screws, lift up the top.
7- Unthread the screws securing the fan switch.
8- Disconnect the wire connection and replace it with the new one.
We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
May 24, 2024
I have a Jenn Air gas cooktop with downdraft model number is JGD3430BS00. The motor would shut off by itself after running about 15 minutes, and motor temperature would reach to over 200 degrees. I thought the motor probably bad, then replaced with a new motor, still same issue. Now the only thing I can think of is the fan speed control switch. Is there anyway I can diagnose and make sure the switch is the issue before I place an order? Or something else might be wrong? Thanks!
For model number JGD3430BS00
Hi David, thank you for reaching out. As you have already replaced the motor, the issue could be with the speed control switch, part number PS11742668. It activates and controls the speed of the downdraft fan motor in the cooktop. You may need to replace it to fix the issue. We hope this sorts out your problem!
Was this helpful?
Thank you for voting!
Roy
April 4, 2019
My Flame adjusting knob won't turn and the Flame will not shut off. Also on another knob it wont move to turn the gas on. What is the problem. Thanks for your expert advise, i'm getting hungry
For model number JGD3430BS00
Hello Roy, Thank you for the question. If you can remove the knob and turn the shaft manually and it operates normally, you need to replace the knob. If the shaft will not turn, you will need to replace the control switch. Hope this helps!
