This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Whirlpool, Roper, Kenmore.
Part# WP3976568 replaces these:
AP6009019, 3392250, 3976568, 9830777
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
October 8, 2017
Hi, i was wondering if i should order a new timer to fix the issue that i am having with my dryer, it will shut off and then start up again after a few minutes, like it never really shuts all of the way off. So what part do i need?
For model number LGR6634BQ2
Hi Donna,
Thank you for your reply. There are a couple of parts that you could look at. I would suggest you check your thermostats, and your thermal fuse. If both of those parts are checking out alright, I would suggest taking a look at your door switch and your push to start switch as well. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Damien
April 9, 2018
Dryer works fine good heat dries clothes but the timer will not advance at all. Runs in the same position until i stop it manually.
For model number LER3624EQ0
Hi Damien,
Thank you for your question. There are a few parts that you can check just in case. You should take a look at your thermostats and thermal fuses. If those parts are testing at 0 ohms then they are definitely fine. If they are fine you may have to look at your door switch. If that part is fine then it might actually be your timer itself that is the issue. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
John
September 3, 2021
The timer runs its cycle and stops just before the shout off point. Do i need a new timer or is their a motor that is some thing to keep it turning?
For model number REL4636BW2
Hello John, thank you for writing. The Timer is one complete Assembly. The part you need is PartSelect Number PS11742161. We hope this helps.
Was this helpful?
Thank you for voting!
Bobbie
April 26, 2022
when i set timer it dont stop untill i shut it off and i only have heat when i runs for a long time and sometimes i dont have heat at all. would i need a new timer?
For model number Ler4624bq2
Hello Bobbie, Thank you for your inquiry. You can test the timer with a multimeter to see if is causing the issue, but for the symptom of the dryer not heating or taking a long time to heat, we would recommend checking the thermal fuse, the thermal cut off kit, the high limit thermostat, the cycling thermostat, the lid switch and the heating element. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Turning the timer to setting needed. It starts to run when entering each setting. Normally you dial in setting wanted , then press start button. So now I leave door open and dial in setting and close door and it starts automatic. Would problem be start button or on motor or timer. Thank you
For model number LER5624DQ1
Hi John, Thank you for the question. I suggest replacing the Push-To-Start Switch. This should fix the issue you are having. Good luck with the repair!
