Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Diana B - April 22, 2021
Verified Purchase
Control panel for dishwasher.
Fast, Great service..The control panel was the exact part easy to install myself and works perfect..
★★★★★
★★★★★
Dennis M - August 7, 2018
Verified Purchase
Dishwasher clean light
The clean light is on even when the dishwasher has not been run.
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rob
August 26, 2017
My Whirlpool dishwasher normal and start buttons are not working. These are the ones I use most. Trying to order the correct part. Was wondering if this sounds like a control panel issue? If so, no images available on this site. Would I order a control panel or a control panel and touch pad/white?
For model number DU1101XTPQ8
Hi Rob,
Thank you for your question. I would suggest testing with a multi-meter to see if it is your control panel that you would need to replace. First and foremost, disconnect the power to your appliance before starting the test. Remove the screws that are holding your inner door panel in place. Then carefully remove it so that you can get access to the electronic control board. Remove the cover and then unclip the ribbon that connects both the electronic control board and the control panel. There is an arrow on the ribbon cable by one of the contacts, that arrow indicates that contact is number 1. You will want to test the contacts across 6 and 10. When you push the Start button these contacts should close. If they do not, then you will need to replace this part. Good luck, I hope that helps with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
