Quick Question!

Have you ever purchased from PartSelect.com before?

11740685-1-S-Whirlpool-WP307250-Multi-Temperature Gas Thermostat
11740685-1-S-Whirlpool-WP307250-Multi-Temperature Gas Thermostat 11740685-2-S-Whirlpool-WP307250-Multi-Temperature Gas Thermostat 11740685-3-S-Whirlpool-WP307250-Multi-Temperature Gas Thermostat https://www.partselect.com/Schematics/Maytag/36065.gif

Multi-Temperature Gas Thermostat

Your Price

$34.43
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11740685
Manufacturer Part Number WP307250
Manufactured by Whirlpool

Also known as cycling thermostat with internal bias heater - L150-25 - 5 terminal.

This part works with the following brands: Maytag.

This part works with the following products: Dryer.

This part fixes the following symptoms:

  • No heat or not enough heat.
  • Takes too long to dry.
  • Timer will not advance.
  • Will not shut off.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Most Helpful

Question:

The dryer (which is about 10+ years old) is heating up during the auto dry and timed dry/air fluff; however, the timer does not advance when using auto dry. In auto dry mode, the dryer will just continue to run unless manually stopped. The lint trap and filter are both clear/cleaned. Would replacing this part cause the timer to "re-activate" during auto dry?

Celeana for model number MDG2500BWW
Answer:

Hi Celeana, Thank you for the question. Looking through the symptoms it sounds like you will need to replace the timer. This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting. Hope this helps!

Related Parts: Timer

Most Recent

Question:

My apologies, i'm not sure if this changes your response; but the timer works during timed /air fluff - just not during auto dry.

Celeana for model number MDG2500BWW
Answer:

Hi Celeana, Thank you for getting back to us. If you timer is not advancing I would check the timer, the timer dial skirt, the timer knob, the m series new style coil kit, the thermostat and the radiant flame sensor. I hope this helps. Thank you and have a great day!

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 5 reviews What's this?
1-5 of 5
 

57 of 79 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: Doug from Walden, NY

Maytag dyer stopped heating

My 20 yr old Maytag dryer had experienced this problem about 10 years ago. At that time I replace the Gas Dyer Radiant Flame sensor and it fixed the problem. I figured a sensor went bad again however I opted to replace all of the sensors at once thinking I'm avoiding potential future issues and the dryer will out live me. Replacing the sensors is a piece of cake on my Maytag. A nutdriver and srewdriver was all that I needed. PartSelect was great to deal with and the parts did the trick.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

16 of 16 people found this instruction helpful

Parts Used:
  • Multi-Temperature Gas Thermostat
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: Patrick from Marysville, WA

The dryer would run continuously when in auto

I removed the two screws on the front of the dryer and pulled out the bottom of the dryer front until the clips on the top came loose. Next I removed the two screws that hold the thermostat in place and then switched the wires from the old one to the new one. I did them one at a time to ensure that they didn't get mixed up. After that I reinstalled the thermostat and then replaced the front of the dryer. The timer now advances when it is in auto mode.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

10 of 12 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Screw drivers
Customer: douglas from phillipsburg, NJ

Dryer wouldn't dry

a lady from church couldn't get her dry to dry. older maytag gas dryer. built really good. took off the front panel, tested the different thermostats and found the one that was broken. replaced the igniterwhile I was at it. hooked up the exhaust and fired her up. Make sure all of the lint is vac'ed out of the system. thats what built up and cooked the thermostat.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

7 of 9 people found this instruction helpful

Parts Used:
  • Multi-Temperature Gas Thermostat
Level of Difficulty: Really Easy
Time to do repair: 30 - 60 mins
Tools: Nutdriver
Customer: Green from Germantown, TN

Dryer was getting really hot in normal drying mode

This is a gas dryer. I was able to access the thermostat through the small front access panel. Not easy to see but with a short nut driver I could take out the two screws. I was able to pull the thermostat to the front panel hole and switch the wires. Putting it back in was a challange since I had to do it by feel since I could not look and get my arm in at the same time. Suggest anyone that does this put a small piece of paper around the screw to hold it in the driver

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 5 people found this instruction helpful

Parts Used:
  • Multi-Temperature Gas Thermostat
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Christopher from Toms River, NJ

No flame

Firts replaced a thermostate - did not fix the proble. ( had a glow from the starter but no flame.)

checked igniter sensor OK (got no resistance) so replaced the two coils that sit on top of the gas burner. With new coils noticed a much brighter glow from the igniter and the gas line opened up to produce a flame

Dryer has workd successfully for the last 5 loads.

Able to run dryer with the front removed by holding in the microswitch activated when door is closed.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-5 of 5

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11740685
Manufacturer Part Number: WP307250
Brand Model Number Description
MaytagBDG7600Dryer - Gas
MaytagBDG7800Dryer - Gas
MaytagDG4910Dryer - Residential
MaytagDG5910Dryer - Residential
MaytagDG7500Dryer - Residential
MaytagDG7600Dryer - Residential
MaytagDG7800Dryer - Residential
MaytagDG8200Dryer - Residential
MaytagDG8300Dryer - Residential
MaytagDG8420Dryer - Residential
MaytagDG8500Dryer - Residential
MaytagDG8600Dryer - Residential
MaytagGDG4910Dryer - Residential
MaytagGDG5910Dryer - Residential
MaytagGDG7500Dryer - Residential
MaytagGDG7600Dryer - Residential
MaytagGDG7800Dryer - Residential
MaytagGDG8200Dryer - Residential
MaytagGDG8300Dryer - Residential
MaytagGDG8420Dryer - Residential
MaytagGDG8500Dryer - Residential
MaytagGDG8600Dryer - Residential
MaytagLDE4000ACLDryer - Residential
MaytagLDE4000ACWDryer - Residential
MaytagLDE4000ADLDryer - Residential
MaytagLDE4000ADWDryer - Residential
MaytagLDE7400ACLDryer - Residential
MaytagLDE7400ACWDryer - Residential
MaytagLDE7400ADLDryer - Residential
MaytagLDE7400ADWDryer - Residential