Maytag/Maytag_Thumb/55971.gif
See part 46 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.com

Gas Valve with Coils

★★★★★
★★★★★
1 Review
$ 221.08   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11740673
Manufacturer Part Number WP306176
Manufactured by Whirlpool
Product Description

Gas Valve with Coils Specifications

This valve comes with electrical solenoids/coils.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
No heat or not enough heat
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Maytag, Crosley.
Part# WP306176 replaces these:
AP6007556, 306176, 35001094
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Sam
    June 27, 2019
    What coil can I use for these valve
    Hello Sam, Thank you for the question. The coils are only sold as part of the valve assembly. Hope this helps!

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
    Thomas
    November 27, 2019
    Igniter goes on but dryer only fires up on occasion
    For model number MDG2600BWW
    Hello Thomas, Thank you for the question. I suggest testing the M Series New Style Coil Kit, PartSelect Number PS334310. The coils should be reading a resistance of 1000 - 2000 ohms. If it is zero, then your coils are bad. Good luck with your repair.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.6 / 5.0, 10 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Gas dryer would only occasionally heat up.
        I noticed that the igniter would glow white hot for about 5 to 10 seconds, but would only ignite every once in a while. I decided that it was probably the gas valve that was bad. I removed the wires to the igniter and valve, and removed the two screws that secured the valve to the frame. I accidentally bumped the igniter as I removed the valve from the dryer - it broke! The igniter is extremely delicate, be careful not to touch it. When the new valve and igniter came in, I swapped some of the mounting hardware and installed the valve and igniter. I reattached the wires. The dryer fired up immediately - it was an easy fix.
        • Daniel from East China, MI
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Wrench (Adjustable)
        • Parts Used:
          WP306176, 4391996
        69 of 77 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dryer was failing to dry clothes (heat going off intermittently)
        To be more precise, the clothes weren't getting dry and there was some sort of vibration sound coming out of the dryer. I removed the front panel (by removing the 4 front screws (2 in the door and 2 on the opposite side). I then ran the dryer while inspecting the innards. I notice that the igniter was lighting but was failing to start the gas flame. I could smell a little gas during this period so I know that gas was available but was not getting released in the correct amount. This told me that the gas valve we malfunctioning. I remove the gas valve and broke the igniter (it's fragile so be careful). Some other contributer did the same thing :(
        I replace both the igniter and gas valve and presto... it was fixed. My wife was impressed and I looked good. I guess that's all that matters :)
        • Patricia from Oakland, CA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers
        • Parts Used:
          WP306176, 4391996
        26 of 27 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        No Heat In the Dryer.
        Let me give a little background first for those trying to diagnose their dryer issue. My dryer was turning on and running but the clothes were not drying. From everything i read I thought it was going to just be the IGNITER (part# 304970 [Partselect# PS373025]), but when I opened the dryer and watched it worked I saw that the igniter was working fine and the gas was coming on. This made me think that it is was the HIGH LIMIT THERMOSTAT (# 3033950 [Partselect# PS2029366]). I replaced this and got no real change other than the gas would stay on a bit longer at the start. So I replaced the other TEMPERATURE CONTROL THERMISTOR (# 3072080 [Partselect# PS2030068]) but this had no effect. I then went back to my original thought of the igniter and replaced it with no improvement. My dryer was still running and only occasionally lighting the gas to heat up the drum, the clothes would eventually dry after a much longer than normal time. After reading some other stories I decided to try the GAS VALVE WITH COILS. I ordered the part and was surprised when it arrived at my house the next day. I took out the four screws in the front panel which are accessed by opening the door to the dryer. I shut off the gas and removed the igniter to avoid any accidents with it. Unscrew the gas line from the old valve, remove two screws in bottom of unit to remove it from the dryer. Turn it over and remove two small screws to remove old valve from housing. Now take your new valve and do the opposite. Set in the housing, screw in the two small screws, place in dryer and replace two screws to hold in place. Screw gas line onto new valve and replace igniter. Turn on the gas and give it a test run. My dryer fired right and for the first time in a long time the whole dryer actually got warm.
        • Craig from San Miguel, CA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Socket set
        • Parts Used:
          WP306176
        25 of 28 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dryer runs, but no heat
        Removed screws in hinges and on opposite side inside the door to remove the front panel.

        You can put the door back on at this point to run the dryer with the burner exposed. At this point I could tell that the igniter was working and the gas valve would occasionally work so that burner would fire. The valve only seemed to work when everything was completely cooled down. I first replaced only the solenoid coils on top of the valve, this did not fix the problem. When I replaced the entire valve the problem was fixed.

        Replacing the valve is easy.

        1) Unplug dryer from wall outlet
        2) Turn off gas supply cutoff valve
        3) Remove door and front panel
        4) Unplug wires from solenoid coil terminals. There are two coils on top of the valve body.
        5) Remove gas line from valve body.
        6) Remove two screws which secure the bracket holding the valve body and burner nozzle to the bottom of the dryer cabinet.
        7) Remove two screws which secure the valve to the bracket.
        8) Reverse the procedure for installation of new valve.
        • doug from dallas, TX
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers, Wrench (Adjustable)
        • Parts Used:
          WP306176
        12 of 15 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        After initial ignition & first heat cycle, gas valve would fail to re-ignite
        The good: No need to pull out dryer beyond point where (wall) gas valve could be shut off.
        The gotcha: Be sure to wear thick leather gloves to protect your hands. I discovered sharp edges the hard way!
        The tip: To loosen gas valve inlet nut and to remove gas pipe from valve, use a bottom-to-top wrench motion. Despite threads being right-handed, this counter-intuitive operation (the thinking is that you are tightening the nut instead of loosening it) is necessary due to nut being located on the valve rather than the gas pipe which reverses the context.
        The ending: Wife is happy to be back in the drying business and I'm happy just to have her happy not to mention saving a little $ in the process! Thanks PartSelect.com!!!
        • Lawrence S from Rancho Santa Margarita, CA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Wrench (Adjustable)
        • Parts Used:
          33001809, WP306176
        8 of 13 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Flame would go out during cycle and not fire back up
        Removed front of dryer, removed 3 screws from bracket mounted on bottom holding gas valve assembly, removed nozzle from assembly. Removed 2 screws that held gas valve assembly to bracket. Replaced with new gas valve assembly and dryer works fine
        • Ralph from Phildelphia, PA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Socket set, Wrench (Adjustable)
        • Parts Used:
          WP306176
        4 of 6 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        gas valve making chatter noise
        shut off gas to dryer took apart the old and installed the new gas valve and glow coil.
        • denise from winthrop, MA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver, Screw drivers, Wrench (Adjustable), Wrench set
        • Parts Used:
          WP306176, 4391996
        4 of 8 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Dryer would not light
        Easy yo replace the gas valve.

        TURN OFF THE GAS. Remove dryer door and the 2 screws holding the bumpers on the left side of the door opening, then pull the dryer front forward at the top. Unplug the 2 electrical coils. Unplug the igniter. Disconnect the gas connection union. Remove 2 hold down screws from the bottom. Pull the burner assembly out of the dryer (BE VERY CAREFUL OF THE IGNITER - DON"T TOUCH). Remove 2 small screws holding gas valve to burner.

        Reverse process to re-assemble.
        • Dave from Milford, MI
        • Difficulty Level:
          Easy
        • Total Repair Time:
          30 - 60 mins
        • Tools:
          Nutdriver, Screw drivers, Wrench (Adjustable)
        • Parts Used:
          WP306176
        3 of 5 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        no gas circulation in the appliance
        removed the screws and disconnected the wires and replaced the old unite with the new one
        • diana from valencia, CA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Screw drivers, Wrench (Adjustable)
        • Parts Used:
          WP306176
        3 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Noticed a slight gas odor at startup. Did not light on first try and flame seemed weak after lighting.
        A new gas valve solved the problem. The valve was an exact match but the gas fitting nut has a slightly larger diameter and required a minor modification to the 30 year old Maytag mounting bracket to provide clearance.
        • James from BEACON, NY
        • Difficulty Level:
          Easy
        • Total Repair Time:
          1- 2 hours
        • Tools:
          Screw drivers, Socket set, Wrench (Adjustable)
        • Parts Used:
          WP306176
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Customer Reviews
          Average Rating:
          ★★★★★
          ★★★★★
          1 Review
          3.0
          Filter By Rating:
          • 5 Stars
            0
          • 4 Stars
            0
          • 3 Stars
            1
          • 2 Stars
            0
          • 1 Star
            0
            Sort by:
            Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
              Model Cross Reference
              This part works with the following models:
              PartSelect Number: PS11740673
              Manufacturer Part Number: WP306176
              Brand
              Model Number
              Description
              Crosley
              CDG4205AWJ
              Dryer - Residential
              Crosley
              CDG4205AWW
              Dryer - Residential
              Maytag
              DG212
              Dryer - Residential
              Maytag
              DG22CA
              Dryer - Gas
              Maytag
              DG303
              Dryer - Residential
              Maytag
              DG312
              Dryer - Residential
              Maytag
              DG313
              Dryer - Residential
              Maytag
              DG382
              Dryer - Residential
              Maytag
              DG4000
              Dryer - Residential
              Maytag
              DG412
              Dryer - Residential
              Maytag
              DG482
              Dryer - Residential
              Maytag
              DG490
              Dryer - Residential
              Maytag
              DG4910
              Dryer - Residential
              Maytag
              DG512
              Dryer - Residential
              Maytag
              DG590
              Dryer - Residential
              Maytag
              DG5910
              Dryer - Residential
              Maytag
              DG612
              Dryer - Residential
              Maytag
              DG712
              Dryer - Residential
              Maytag
              DG713
              Dryer - Residential
              Maytag
              DG7400
              Dryer - Residential
              Maytag
              DG7500
              Dryer - Residential
              Maytag
              DG7600
              Dryer - Residential
              Maytag
              DG7800
              Dryer - Residential
              Maytag
              DG8000
              Dryer - Residential
              Maytag
              DG8200
              Dryer - Residential
              Maytag
              DG8300
              Dryer - Residential
              Maytag
              DG8410
              Dryer - Residential
              Maytag
              DG8420
              Dryer - Residential
              Maytag
              DG8500
              Dryer - Residential
              Maytag
              DG8600
              Dryer - Residential

              Get in touch, we're here to help!

              Open until 10PM EST

              Contact Customer Service