Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Monica
March 21, 2018
Water is filling reservoir, circulating pump is circulating, but no ice. Compressor gets very hot and fan does not come on...is there a switch that could be out or compressor not good? what should we check?
For model number KUID508ESS1
Hello Monica, thank you for your question. It sounds like the issue is that the unit is not freezing, and actually getting cold enough to freeze the water. I would check the OVERLOAD Part Number: PS11737729, Relay, Start (Production) Part Number: PS11739742 as well as the MOTOR-COND
Part Number: PS12114322 to see if it turning. I would also check the condenser to see if the unit has frost build up on it. I hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jennifer
August 15, 2023
Ice sheet will not release from the freezer plate to the cutting grid. It continuously builds ice on the plate.
For model number WUI75X15HZ
Hi Jennifer, thank you for contacting us. We have concluded that the issue is with the ice maker bin temperature sensor, part number PS11755842, which may need to be checked. If this part is faulty, you may need to replace it. We hope this information is useful!