Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
ANN
January 3, 2019
Rear roller is broke, do you have that replacement part? All I see is the front roller.
For model number ET1FTTXKB02
Hello Ann, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11755335. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Bruce
June 5, 2019
I need a right front wheel on my fridge, it cracked and disintigrated. How do i get the wheel assembly off the fridge. Can you pdf me the installation instructions please. Thankyou very much. Bruce larking
For model number MTB2254EEW00
Hi Bruce, thank you for your question. Unfortunately we do not have a PDF version of the instructions. Those instructions are provided by your manufacturer and come with the part itself. This part is the front wheel of the appliance model number that you provided. To replace it you will need to be able to tilt or lift the refrigerator safely so that you can have access to unscrewing the part. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Tracy
November 16, 2021
I am looking for the rear roller. Only saw front roller on parts list. Thank you
For model number WRT1L1TZYS00
Hi Tracy,
Thank you for your question. The part number listed under your model number for the rear roller is PS11755335. If you need the rivet to secure it, the part number listed for it is PS11739025. If you would like to place an order for these parts, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Right front wheel broke
Definatly a two man job. I suggest you put a pad down to protect your floor. Remove the filter, grill, and bolts per instructions. Everything is straight forward. Move the frame back 1/2 to 1 inch then tilt the frig back on it's side about 4 inches. If the frame doesn't drop down, move it back until the front of the frame comes of the front lip of the frig. Place a block under the frig lip NOT the frame and WATCH YOUR FINGERS. The wheel should be hanging down. Just pull out the pin, replace the wheel (make sure you have it facing the correct way) and tilt back and pull the blocks. Move the frig back in place and replace the bolts. Took me and a buddy less than 30 minutes.
Tony from Chicago, IL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
31 of 40 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
front roller wheel broke
its not that hard to replace. may need help to tilt fridge on one side so you can get to the bottom to remove wheel.Had to undo all four corner screws/bolts to loosen bottom section and slowly pull out base frame which holds the 4 wheels. this frame is also holding the compressor and fan so be careful.replace wheel and slowly put frame back to position and screw back bolts. pull back fridge to upright position. leave unplugged for a day or two to allow gas to come back to normal level as we had tilted it.plug it back and it works. thanks Anoop
With our Fix app model plate image recognition technology, we'll recommend the parts guaranteed to fit your appliance. Simply snap a photo, and we'll take care of the rest.
"I love love love this app. It's so nice to have useful information (receipts, manuals, parts lists, warranty info, pictures, etc.) on all of my household appliances and devices in one place."
You added to your cart
✖
$
Qty:
Total item(s) in cart:
Order Subtotal
$
*Taxes and shipping will be applied during checkout
