Freezer Drawer Bin - Left Side WP12924903

Hello Orin, Thanks for your question. You have to remove the front drawer to remove the bins. Open the freezer drawer, then loosen the four screws which keep the glides to the drawer's front. Loosen them only, but do not remove them. Lift the drawer front up and off the screws. Remove the glides out of the freezer compartment, and put the screws in the top of the drawer front inside the bracket slots. Pull the brackets forwards to position the two screws in the bottom of the drawer front into the brackets, then tighten the screws. I hope this helps.

Hello James, thank you for your question. First open the freezer drawer and remove the screws holding the inner freezer door panel from the slide brackets. Then using a pair of pliers gently squeeze the clips at the top right and left sides of the lower bin to release them from the adapter rails, the top bins can also be removed the same way if needed. Next, the 2 metal track rails can be removed by pressing on a release button located on the rear track receiver, the receivers can be unscrewed from the freezer side liner walls if needed. I hope this helps!

Hello Bryan, thank you for getting in touch. To remove the freezer drawers, you may need to follow these instructions: 1. Open the freezer drawer to full extension. 2. Loosen the four screws attaching the drawer glides to the drawer front. 3. You may need to loosen the screws three to four turns and keep the screws in the drawer front. 4. Lift the drawer front upward and off the screws. Good luck with your repair!