Quick Question!

Have you ever purchased from PartSelect.com before?

11738161-1-S-Whirlpool-W10877037-NUT-SPRAY
11738161-1-S-Whirlpool-W10877037-NUT-SPRAY 11738161-2-S-Whirlpool-W10877037-NUT-SPRAY 11738161-3-S-Whirlpool-W10877037-NUT-SPRAY https://www.partselect.com/Schematics/Maytag/53380.gif

NUT-SPRAY

Your Price

$4.37
Order within the next 10 hrs and your part ships today!
Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738161
Manufacturer Part Number W10877037
Manufactured by Whirlpool

This upper spray arm nut is three inches long. It attaches to the spray arm to help hold it in place. It is all white in color and is made of plastic.

This part works with the following brands: Maytag, Jenn-Air, Magic Chef, Crosley, Admiral, Amana, Norge.

This part works with the following products: Dishwasher.

Questions & Answers

Ask our experts a question on this part and we'll respond as soon as we can.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 28 reviews What's this?
1-15 of 28
 

21 of 21 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Alane from Piedmont, OK

Spray arm would not stay on during wash

Removed old spray arm and spray arm nut with a twist of my fingers. Screwed in new spray nut with my hand, and snapped in the new spray arm. Works PERFECTLY! I did it all by myself! Saved me a costly plumber bill! I am soooo proud of myself!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Jack from Kalkaska, MI

Door seal leaking, upper sprayer coming off

First I got a heavey towel out and laid it down on the floor. Then put the protable dishwasher on its back side to expose the casters. I removed the two screws on the bottom kick plate. I cut the tops off the old casters, the plastic portion. Pulled the old casters out with pliers, then pushed the old plastic housings out using the back side of the side cutters. Just pushed the new front casters right into place. on the back ones,Just pulled the old casters right out with the pliers. they came right out. Pushed the new ones back into place.Put the kick plate back in place. Took the old upper arm nut off. Compared the parts. put the new arm in the new nut. Screwed the new nut in place. Got it back up right, hooked it up and ran it. I am disabled with nerve damage to my arms and hands. The average person could have done this in about 10 mins. It is just like it is brand new now. Jack

Help other customers find the most helpful instructions.

Were these instructions helpful?   

6 of 7 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Lee Don from Dallas, TX

The spray arm had continually been disconnecting from the nut

after reading the remarks from other DIY users of the site, I realized that not only did I need to replace the spray arm, but should replace the spray arm nut as well. The repair took less than a minute to unscrew the old one and add the new, and it has worked like a charm ever since. Thanks guys, and goooood luck.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Sandra from Holladay, TN

My spray arm kept falling off

I ordered the new spray arm and nut, snapped them together, screwed the nut onto the screw and started a load of dishes. That's how simple it was. Glad I found your website. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: James from Hoopeston, IL

Upper spray arm falling off during wash cycle

Unscrewed old nut, inserted new nut into new spray arm and screwed the assembly back in. Took less than one minute. Requested the 3-5 day delivery and received parts on second day. After examining the old and new parts it appeared the nut was the only part I would have needed, but since parts were less than $5 each I did not want to take a chance. Total cost was $16, the shipping being the most expensive item but much cheaper than paying for a service call.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

2 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Michael from Long Branch, NJ

Assembly kept falling off

removed old nut and arm, put in new one, took about ten seconds

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: John O from MESA, AZ

Upper spray arm fell off whenever water started flowing through it.

The upper dish rack was in the way for my old body and short arms to reach the nut, so I had to pry the plastic bumpers off with a screw driver and remove the rack. From there you could almost do it with your eyes closed. Unscrew the old spray nut, screw in the new one and pop the spray arm on. Slide the dish rack wheels into the rail tracks push it closed, and insert the plastic bumpers. The only tricky part was the bumpers. You have to pry the forward-most piece of plastic away from the piece behind it. That pulls the holding edge out of the slot in the rail, and the bumper comes right out. Putting it back just takes a push from your thumb, and make sure the holding edge is back in the slot. Before I put the new nut on, I compared it to the removed one - it was obvious that the latching ring on the old one had been worn by the rotation of the Spray Arm, so the water pressure was all that it took to push it off.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Charles from Boise, ID

The spray arm would not stay in the nut.

I unscrewed the old plastic nut, Screwed the new nut in place, and snapped the spray arm into the nut. The new nut has a different design (better) and I do not anticipate having to replace it again.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: A Bit Difficult
Time to do repair: 15 - 30 mins
Tools:
Customer: Frank from Garland, TX

Upper are spray assembly came off the nut.

I found it easier to attach the spray arm to the nut before installing the nut on the threaded inlet water shaft. The threaded inlet shaft had some play and it was necessary to be sure that it was pulled through cabinet as far as possibe to start the threaded nut.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Gary from Flower Mound, TX

Upper spray arm nut was worn out and upper spray arm kept falling off.

Removed upper spray arm nut and spray arm and replaced with new. No tools required, took maybe 1 minute.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: James from Penfield, NY

Upper spray arm nut was worn out.

Unscrewed the old nut, attached the new arm to the new nut and screwed it in.

Getting the handle off of the old silverware basket was very tough but I did it with help from two of my kids. Why do they call it an 8-section basket when there are only 7 sections? Oh, well.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 1 people found this instruction helpful

Parts Used:
  • NUT-SPRAY
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: NANCY from CHINO VALLEY, AZ

Upper spray arm kept coming off during operation.

NO TOOLS NEEDED! I found the old arm nut worn and ordered the replacement nut. When the part arrived, I connected the arm to the nut and screwed the nut back into place. NOT TOO BAD FOR A 71 year old lady, right? Best part of all, even with the shipping, I probably saved $75 (+/-) not having to call a repairman to the house... Ironically, I'm married to a plumber too!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Helen from Boise, ID

The spray arm kept popping off and wouldn't rinse dishes properly

After reading other customer comments I knew what to order. When the parts arrived all I had to do was unscrew the nut and screw the new one on and snap the spray arm into place. As easy as that.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1 of 2 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Joseph from Henning, TN

Old upper spray arm fell off

Snapped the new arm into the nut and screwed it in. No problem.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

0 of 1 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools:
Customer: Ann from San Marcos, TX

The top spray arm was falling off every wash cycle

I looked on your website, thanks to my daughter-in-law, and found not only the pieces but notes from others who had solved their similar problems at little cost and no time. So I ordered the parts, they came in a couple of days and in a very few minutes the washer was working again. And the pieces are staying on. Thanks for the parts and especially for the info and encouraging notes from other. By the way, I'm 75 and figured since a 71 year old woman did her machine I should be able to do mine. And I did. Thanks!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-15 of 28

Model Cross Reference

This part works with the following models:

PartSelect Number: PS11738161
Manufacturer Part Number: W10877037
Brand Model Number Description
Magic ChefCDB6100AWEDishwasher
Magic ChefCDB6100AWNDishwasher
Magic ChefCDB6100AWXDishwasher
CrosleyCDC400BDishwasher
CrosleyCDC450BDishwasher
CrosleyCDC610BDishwasher
CrosleyCDU250BDishwasher
CrosleyCDU250VDishwasher
CrosleyCDU400BDishwasher - Undercounter
CrosleyCDU450BDishwasher
CrosleyCDU450VDishwasher
CrosleyCDU510BDishwasher
CrosleyCDU510VDishwasher
CrosleyCDU600BDishwasher
CrosleyCDU600VDishwasher
CrosleyCDU610BDishwasher
CrosleyCDU610NDishwasher
CrosleyCDU610VDishwasher
CrosleyCDU8000BDishwasher
CrosleyCDU8000VDishwasher
CrosleyCDU810BDishwasher
CrosleyCDU810VDishwasher
Magic ChefDC4000BDishwasher
Magic ChefDC4500BDishwasher
AmanaDDW261RABDishwasher
AmanaDDW261RAWDishwasher
Magic ChefDU2500BDishwasher
Magic ChefDU2500VDishwasher
Magic ChefDU4000BDishwasher
Magic ChefDU4000B-CDishwasher