This part is the replacement motor pulley for your dryer. The motor pulley allows the dryer belt to run straight while the dryer is operating. If your motor pulley is damaged, your dryer may not tumble, and may not start altogether. A damaged motor pulley can also damage the dryer belt, and it may need to be replaced as well. Be sure to disconnect power from the dryer before you begin this repair. This motor pulley is a genuine OEM part sourced directly from the manufacturer.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Kyle S - December 17, 2022
Verified Purchase
Fixed
Was easy fix
★★★★★
★★★★★
Josephine B - December 4, 2022
Verified Purchase
Not to happy..
Very cheaply made......this is my 2nd one in 8 months. The original one that came on the dryer lasted 12 yrs.
★★★★★
★★★★★
Jesse V - March 4, 2021
Verified Purchase
Pulley
Easy to install once got the broken one off
★★★★★
★★★★★
Luis R - January 24, 2021
Verified Purchase
great, the parts I ordered are the right parts I get tank you
motor pulley and the drum belt
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 2.2 / 5.0, 2 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Broken Motor Pulley
Removed back panel of the dryer-reached my hand to the back of the motor shaft, put 7/16 wrench on it to hold the shaft while I removed the broken pulley with pliers. Very easy fix-the tech on Utube took the entire dryer apart totally unnecessary. If that is what the factory tells its tech"s to do its no wonder why the labor charge woul
... Read mored be thru the roof.
Read less
Mark from PELHAM, MA
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Socket set
7 of 9 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken Motor Pulley
I am a retired applaince repairman not recommended for amature to repair this model.
Anthony from Lake Forest, CA
Difficulty Level:
Very Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
19 of 70 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Michael
October 30, 2017
My dryer is venting and spinning just fine I believe. But the clothes seem to stick to the inside of the drum while it spins and therefore they don't fall. I think this is because the drum is spinning too fast. If I understand correctly, this is a result of the grooves on the motor pulley being worn out. Replacing the motor pulley (part #29) will fix this issue. Is that correct?
For model number WED9500TW3
Hi Michael, Thank you for the question. Yes I suggest replacing the Motor Pulley. It will also be a good idea to replace or at least check the belt for as well. The worn down groves on the pulley can cause belt wear as well. Good luck with the repair!
Are the internal threads left hand on part number w10837625 ?
For model number mdet446ayw
Hello Dennis, Thank you for your inquiry. We are showing that it is an internal right hand thread. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Melvin
December 31, 2019
Pulley has to be left hand treaded.Do not need any belts, has lots.For maytagperforma dryer.
For model number PDET920AZW
Hi Melvin, thank you for your question. Your motor pulley does not come separately from the motor. So you would have to get this part: PS11739459. Good luck with your repair.
Will this part fit on my above referenced model? If not, please advise me of correct part number. Thanks
For model number kenmore 110.87088601
Hello Mitch, Thank you for your inquiry. We have researched the model number you have provided and confirm that this part will fit your model. We hope this helps you.
Was this helpful?
Thank you for voting!
Rob
April 9, 2023
Will this part work in place of part #PS11744884?
For model number YWED4850HW0
Hello Rob, thank you for your question. No, for your model you must use PS11744884. Good luck with this repair.
I know I need this part to complete the repair. My only concern is the part shown doesn’t match the pulley on the actual motor. Is this part an upgrade to the original? I’m assuming it will work with my model number listed
For model number WED9450WR1
Hi Daniel,
Thank you for your question. Yes, this would be the correct pulley for your motor. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
