Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Richard G - May 29, 2018
Verified Purchase
Repair
Part received with no damage. Well prepared for shipping.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
dropped a crock pot glass lid onto the glass cooktop cracking the glass
I slid the range out only a couple of inches so I didn't have to detach the downdraft blower connection. Undoing the four #2 square head screws was easy from the under the control panel as well as the three pairs of screws holding the front of the glass cooktop frame. Undoing the two in the rear (one on each side) was a bit of a challeng
... Read moree in that they were in upside down and difficult to see without a mirror. It was easy to drop the screws as they fell never to be seen again. After they were removed the top was easily removed. Reinstalling the back two screws was the most difficult of the entire procedure. I replaced the #2 square head bits with the same size hex head screws. Using a nut driver made the whole process much easier. By the way, the distance between the holes in the rear and the replacement top is 1/8" difference that made lining up the holes a frustrating experience. I ended up using a rattail file to hog out the opening to enlarge the holes. That made the lineup much much more easy.
Read less
Gary from BEND, OR
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Julie
June 20, 2019
There is no picture on your website to tell if this is the correct cooktop. I need a replacement cooktop for my range (model number above). It is a downdraft. Is this the correct replacement top I need?Thank you!
For model number KSEG950ESS0
Hi Julie,
Thank you for your question. Where this part is listed under your model number, it is the correct part for your stove. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
March 9, 2020
Can i replace this part myself? I'm somewhat handy with tools. Do you have instructions for replacement?
For model number KSEG950ESS1
Hello Richard, thank you for your question. This is a very easy repair. We do not have an installation video on this part, however, you can follow these general steps. Pull the unit out and disconnect the power. Remove the knobs, and check under them for screws, and remove if necessary. Open the door and look for screws that hold the control panel in place and remove, once that is complete there should be mounting brackets on each corner to remove and the glass top should be able to come off at that point. I hope this helps.
