Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Harald S - June 18, 2023
Verified Purchase
easy repair, good function
no problem to fix
★★★★★
★★★★★
Stephen J - March 21, 2019
Verified Purchase
Easy to install after flattening out
Package kinda stinks pain in the butt to get it to seal properly watched video to install still a pain in the butt to get door to seal properly
★★★★★
★★★★★
Troy H - December 31, 2018
Verified Purchase
Easy replacement. Fits Great!
Easy replacement. Fits Great!
★★★★★
★★★★★
Edgardo G - October 16, 2018
Verified Purchase
Great part and material, takes about a day to form a seal around the edges.
The Part is in good condition and arrived earlier than expected. Just need to work on the gasket to form a seal around the edges. After a day I am thankful my appliance is back in working order.
★★★★★
★★★★★
Arthur C - May 20, 2018
Verified Purchase
Part is perfect unable to adjust door so new seal can seal!
The part was perfect after unpacking and letting it re conform to its natural form! I have a problem adjusting the lower hinge. The gap between the door and the main body is 5/8" wide at top and 7/8" wide at the bottom . The bottom angle hinge bracket is not adjustable so as to reduce bottom gap to 5/8" or slightly less. Bottom bracket may have been machined out of tolerance to the plastic pivot pin area. This condition therefore does not allow door gasket to seal to the lower 1/3 of the door in the hinge area and also at the bottom. Please respond with a suggested fix. This unit is in excellent condition otherwise!
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
frozen door unable to close properly
heating the rubber sealer and pull up a little bit. Using the method on the video.
Jenchou from HOPE MILLS, NC
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn freezer door gasket
Ordered and received the correct part from Partselect. Start on top corner and pried the gasket loose. Once loose, just pulled out. Next I cleaned the door and cabinet surfaces. I then dried new gasket after 2 hour soak in hot tub. Press top corners in place. Move to the bottom and do the same and then work the sides in. Smear a thin coat
... Read more of Vaseline on gasket, close door and heat sides with dryer to expand gasket to seal properly. Careful to not overheat. Wipe petroleum clean in about a week. Ta - Da!
Read less
Michael from JACKSONVILLE, FL
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking around the gasket
Heated it up with a hair dryer so it can expand ... then it was ok
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Lisa
August 30, 2017
The freezer gasket part listed is shown on the GE site with an image which is obviously the wrong part (2 square corners on one end, and a rounded edge on the other end). On the GE site there is a review from someone who said this is the wrong part. GE insists it is correct; but i can see by looking that my gasket has 4 square corners, so this part will not fit if the picture on the GE site is correct. Help!
For model number GSL251GXLLS
Hi Lisa,
Thank you for your inquiry. Your original gasket was discontinued by the manufacturer. This is the replacement gasket for your appliance. It should fit. This is the only one available for your model. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Douglas
March 8, 2018
My freezer door pops open every time i get ice or open or close fridge door. Would a new freezer door gasket remedy this or do you have a suggestion on what the problem is and how to fix it
For model number GSS25GFXABB
Hi Douglas,
Thank you for your question. It could be your gasket. I would suggest also just making sure your appliance is completely level. You might also want to take a look at the bottom hinge and the cams there. I hope that helps. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Colten
September 21, 2022
My freezer keeps getting ice on the bottom and eventually leaking out, as it pushes the door to be cracked. I don't know if I need to just try defrosting or if it is a seal etc... any insights?
For model number hsm25gfra sa
Hello Colten, thank you for your inquiry! Our research indicates that the issue is probably with the Defrost Thermostat, part number PS1017716. If that is not the problem or if you have already fixed that, then the problem would be related to the Temperature Sensor, part number PS304103. Customer service is available 7 days a week if you need help placing an order. Glad to be of assistance!
