We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mitchell
December 25, 2024
My door locks and I think it is the fan that is bad. How hard is it to replace? Do all the parts I need come with Part #PS11703401?
For model number RBS307PVB02
Hi Mitchell, thank you for contacting us. Yes, all the necessary components come with the convection fan motor. To replace it, you may need to follow these instructions. These instructions may not be of the same model but will help you with the process. You may need to pull the oven out and take the door off and remove all racks. Take all the screws out from the back cover. Take the back cover off. Remove the screws from the back panel. Remove the fan from the shaft. Then go to the back panel and remove all the screws. Take out the back panel. Disconnect the wires from the fan motor. Press on tab and pull the wires out. Use a screwdriver to remove the screws from where the motor has been attached. Install the new motor. Follow the same steps backward to complete the installation. We hope this information helps!