Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Duane S - April 28, 2019
Verified Purchase
Easy repair , done in 20 minutes, but didn’t need the burner.
Part was packed excellent, received fast, was very happy.
★★★★★
★★★★★
Emily W - November 28, 2018
Verified Purchase
Fire......good
The part fit perfectly, showed up early, and works.
The only oddness was that the part was not wrapped or bagged, was entirely without any documentation, and the tiny parts were all running amok within the box ??But.....they were all present and accounted for, so no harm done.
I would use this service again and/or recommend to friends.
Thank you????
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 3 reviews.
What's this?
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
pilot wouldnt stay lit shut gas off for repair.
Dissassembled top of stove, removed porcelain top. unhooked pilot sensing line from oven thermostat. Removed bottom slide out drawer to gain access to pilot and burner assembly. Removed pilot thermocouple and burner assembly. Pulled down old pilot sensing line through insulation @ back of stove. Shoved new pilot sensing line up into insul
... Read moreation @ back of stove. Used long hook to pull line up through insulation. Installed new pilot thermocouple burner assy in bottom. Hooked up new sensing line to oven thermostat.Reassembled top components, lit pilots and tested operation.
Read less
Edward J. from CANASTOTA, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Wrench set
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven pilot light glowed but would not light.
Sadly, we had order the whole burner assembly , when it was just the thermocouple that was burn up. Pull oven away from wall, access burner assembly, take panel off behind control knobs (4 screws)to expose thermocouple. Install new copper line (thermocouple is attached) in same place where old line comes out. This was kind of tricky , yo
... Read moreu have to fish it through the insulation. One half goes down to oven burner and one goes to top of oven for stove top burner. Once in place, screw nut down on both ends to hold in place. Put it all back together. No need to replace burner unit if that was not the problem. Now you have a spare.
Read less
Terry from Indianola, WA
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Wrench (Adjustable)
28 of 34 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
thermo coupler bad
took stove apart and removed part,installed new parts oven worked great thanks for the correct parts, itseasy to order from you
steve from grand canyon, AZ
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
22 of 33 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
MATTEO GAUDIO
December 12, 2017
Can i purchase the thermocouple only for the oven burner?
For model number AGBS300PJ1WW
Hi Matteo,
Thank you for your question. The thermocouple is only sold with the oven burner and pilot assembly. I hope this helps. Thank you and have a great day!
2 people found this helpful.
Was this helpful?
Thank you for voting!
John
February 8, 2019
Does this thermocouple fit this model #jgbs04pph2wh??
For model number JGBS04PPH2WH
Hello John, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS1154893. Thank you for your inquiry, good luck with this repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Fitzroy Parker
August 6, 2019
My oven burnner pilot goes out during baking...can you give me the cause?thank you
For model number Jgbs06pph2wh
Hello Fitzroy, thank you for inquiring. It sounds as though it has become faulty and needs to be replaced. This Oven Burner and Pilot Assembly part number PS1154893 is the correct replacement for your model. Good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.